RF Exposure

FCC ID: SK9ITR9002

RF Exposure Info

Download: PDF
FCCID_4320501

Certification Exhibit Contains FCC IDs: SK9ITR9002, SK9NIC, SK9WF111, N7NEM7455 FCC Rule Part: 2.1091 Project Number: 72148094 Manufacturer: Itron Inc Model: PMR RF Exposure 5945 Cabot Parkway Suite 100, Alpharetta, GA 30005 USA

Model(s): PMR General Information: Applicant: Itron Inc Device Category: Fixed Environment: General Population/Uncontrolled Exposure Exposure Conditions: Greater than 20 centimeters Technical Information: SK9ITR9002 Antenna Type: External Omnidirectional (Laird, P/N: TRA9023P) Antenna Gain: 3dBi Maximum Transmitter Conducted Power: 26.39 dBm, 435.51 mW Maximum System EIRP: 28.385 dBm, 868.96 mW Technical Information: SK9NIC Antenna Type: External Omnidirectional (Laird, P/N: TRA9023P) Antenna Gain: 3dBi Maximum Transmitter Conducted Power: 27.0 dBm, 501.19 mW Maximum System EIRP: 30.0 dBm, 1000 mW Note: Conducted output power reduced from original certification in order to meet the 1W aggregate power limit for two co-located 900MHz radios. Technical Information: SK9WF111 Antenna Type: Monopole (Taoglas, P/N GW26.0112) Antenna Gain: 1.8dBi Maximum Transmitter Conducted Power: 19.15 dBm, 82.22 mW Maximum System EIRP: 20.95dBm, 124.45 mW Technical Information: N7NEM7455 Antenna Type: External Omnidirectional (Laird, P/N: TRA6927M3PWN-001) LTE Band 2 (1850-1910MHz) Antenna Gain: 5.5dBi Maximum Transmitter Conducted Power: 24 dBm, 251.19 mW Maximum System EIRP: 29.9 dBm, 891.25 mW LTE Band 4 (1710-1755MHz) Antenna Gain: 5.5dBi Maximum Transmitter Conducted Power: 24 dBm, 251.19 mW Maximum System EIRP: 29.9 dBm, 891.25 mW LTE Band 5 (824-849MHz) Antenna Gain: 3.5dBi Maximum Transmitter Conducted Power: 24 dBm, 251.19 mW Maximum System EIRP: 27.5 dBm, 562.34 mW LTE Band 12 (699-716MHz) Antenna Gain: 3.5dBi Maximum Transmitter Conducted Power: 24 dBm, 251.19 mW Maximum System EIRP: 27.5 dBm, 562.34 mW LTE Band 13 (777-787MHz) Antenna Gain: 3.5dBi Maximum Transmitter Conducted Power: 24 dBm, 251.19 mW Maximum System EIRP: 27.5 dBm, 562.34 mW Report: AT72148094-4P0 Page 2

Model: PMR MPE Calculation The Power Density (mW/cm2) is calculated as follows: PG S= 4R 2 Where: S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) Table 1: MPE Calculation Power Transmit Radio Antenna Antenna Power Density Radio Distance Frequency Power Gain Gain (mW Density Limit Power (mW) (cm) (MHz) (dBm) (dBi) eq.) (mW/cm2) (mW/cm2) 902 26.39 0.60 435.51 3 1.995 20 0.173 902 27 0.60 501.19 3 1.995 20 0.199 2400 19.15 1.00 82.22 1.8 1.514 20 0.025 1850 24 1.00 251.19 5.5 3.548 20 0.177 1710 24 1.00 251.19 5.5 3.548 20 0.177 824 24 0.55 251.19 3.5 2.239 20 0.112 699 24 0.47 251.19 3.5 2.239 20 0.112 777 24 0.52 251.19 3.5 2.239 20 0.112 Table 2: Simultaneous Transmissions Calculations Transmit MPE Ratio to Sum of MPE Power Density Power Density Limit Technology Frequency Limit Ratios Limit (mW/m2) (mW/m2) (%) (MHz) (%) (%) LTE B2 1850 1.00 0.177 17.7 ITR9002 902 0.60 0.173 28.7 82.0 100 NIC 902 0.60 0.199 33.1 WiFi 2400 1.00 0.025 2.5 LTE B4 1710 1.00 0.177 17.7 ITR9002 902 0.60 0.173 28.7 82.0 100 NIC 902 0.60 0.199 33.1 WiFi 2400 1.00 0.025 2.5 LTE B5 824 0.55 0.112 21.6 ITR9002 902 0.60 0.173 28.7 85.9 100 NIC 902 0.60 0.199 33.1 WiFi 2400 1.00 0.025 2.5 LTE B12 699 0.47 0.112 34.2 ITR9002 902 0.60 0.173 28.7 98.5 100 NIC 902 0.60 0.199 33.1 WiFi 2400 1.00 0.025 2.5 LTE B13 777 0.52 0.112 20.4 ITR9002 902 0.60 0.173 28.7 84.7 100 NIC 902 0.60 0.199 33.1 WiFi 2400 1.00 0.025 2.5 Report: AT72148094-4P0 Page 3


Document Created: 2019-05-29 09:56:38
Document Modified: 2019-05-29 09:56:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC