RF Exposure

FCC ID: SK9ITR900-1

RF Exposure Info

Download: PDF

FCCID_1251850

Model: ITR900 FCC ID: SK9ITR900-1 IC: 864G-ITR9001

General Information:
Applicant: Itron Electricity Metering, Inc.
ACS Project: 10-0009
Device Category: Mobile
Environment: General Population/Uncontrolled Exposure

Technical Information:
Antenna Type: Omni-Directional 900 MHz Mobile Antenna
Antenna Gain: 5.1dBi
Maximum Transmitter Conducted Power: 26.15dBm, 412.1mW
Maximum System EIRP: 31.25dBm, 1.333W
Exposure Conditions: Greater than 20 centimeters

MPE Calculation
The Power Density (mW/cm2) is calculated as follows:

PG
S=
4R 2
Where:
S = power density (in appropriate units, e.g. mW/cm2)
P = power input to the antenna (in appropriate units, e.g., mW)
G = power gain of the antenna in the direction of interest relative to an isotropic radiator
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm)

MPE Calculator for Mobile Equipment
Limits for General Population/Uncontrolled Exposure*
Transmit Radio Power Radio Antenna Antenna Power
Distance
Frequency Power Density Limit Power Gain Gain Density
(cm)
(MHz) (dBm) (mW/Cm2) (mW) (dBi) (mW eq.) (mW/cm^2)
902.25 26.15 0.60 412.10 5.1 3.236 20 0.265

Installation Guidelines
The installation manual should contain text similar to the following advising how to install the equipment to
maintain compliance with the FCC RF exposure requirements:

RF Exposure
In accordance with FCC requirements of human exposure to radio frequency fields, the radiating element
shall be installed such that a minimum separation distance of 20 centimeters will be maintained.

Conclusion
This device complies with the MPE requirements by providing adequate separation between the device,
any radiating structure and the general population.

ACS Report: 10-0009-15C Advanced Compliance Solutions Page 2

Document Created: 2010-01-29 15:15:56
Document Modified: 2010-01-29 15:15:56

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC