RF Exposure

FCC ID: SK9ITR24

RF Exposure Info

Download: PDF

FCCID_2000024

Model: ITR24 FCC ID: SK9ITR24 IC: 864G-ITR24

General Information:
Applicant: Itron Electricity Metering, Inc.
Device Category: Mobile
Environment: General Population/Uncontrolled Exposure

Technical Information:
Antenna Type: PCB quarter wave embedded slot antenna
Antenna Gain: 3.8dBi
Maximum Transmitter Conducted Power: 18.03 dBm, 63.53 mW
Maximum System EIRP: 21.83 dBm, 152.41 mW
Exposure Conditions: Greater than 20 centimeters

MPE Calculation
The Power Density (mW/cm2) is calculated as follows:

PG
S=
4R 2
Where:
S = power density (in appropriate units, e.g. mW/cm2)
P = power input to the antenna (in appropriate units, e.g., mW)
G = power gain of the antenna in the direction of interest relative to an isotropic radiator
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm)

MPE Calculator for Mobile Equipment
Limits for General Population/Uncontrolled Exposure*
Transmit Radio Power Radio Antenna Antenna Power
Distance
Frequency Power Density Limit Power Gain Gain Density
(cm)
(MHz) (dBm) (mW/Cm2) (mW) (dBi) (mW eq.) (mW/cm^2)
2475 18.03 1.00 63.53 3.8 2.399 20 0.030

Installation Guidelines
The installation manual should contain text similar to the following advising how to install the equipment to
maintain compliance with the FCC RF exposure requirements:

RF Exposure
In accordance with FCC requirements of human exposure to radio frequency fields, the radiating element
shall be installed such that a minimum separation distance of 20 centimeters will be maintained.

Conclusion
This device complies with the MPE requirements by providing adequate separation between the device,
any radiating structure and the general population.

ACS Project: 13-0281 Advanced Compliance Solutions Page 2

Document Created: 2013-06-20 10:21:20
Document Modified: 2013-06-20 10:21:20

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC