RF EXPOSURE

FCC ID: SK9C3A-1H

RF Exposure Info

Download: PDF
FCCID_640397

FCC Part 15.247 Transmitter Certification Frequency Hopping Spread Spectrum Transmitter Test Report FCC ID: SK9C3A-1H FCC Rule Part: 15.247 ACS Report Number: 06-0012-15C Manufacturer: Itron Electricity Metering Inc. Trade name: CENTRON® IMAGE Model: C3A1H RF Exposure 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

Model: C3A1H Advanced Compliance Solutions FCC ID: SK9C3A-1H General Information: Applicant: Itron Electricity Metering Inc. ACS Project: 06-0012 FCC ID: SK9C3A-1H Device Category: Mobile Environment: General Population/Uncontrolled Exposure Technical Information: Antenna Type: PCB Slot Antenna Gain: 3.5dBi Transmitter Conducted Power: 21.36dBm Maximum System EIRP: 24.86dBm Operating Configuration: Mobile (Module) Exposure Conditions: Greater than 20 centimeters MPE Calculation The Power Density (mW/cm2) is calculated as follows: PG S= 4πR 2 Where: S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) MPE Calculator for Mobile Equipment Limits for General Population/Uncontrolled Exposure* Transmit Radio Power Radio Antenna Antenna Power Distance Frequency Power Density Limit Power Gain Gain Density (cm) (MHz) (dBm) (mW/Cm2) (mW) (dBi) (mW eq.) (mW/cm^2) 909.6 21.36 0.61 136.77 3.5 2.239 20 0.061 Installation Guidelines The installation manual contains the following text advising how to install the equipment to maintain compliance with the FCC RF exposure requirements: “RF Exposure (Intentional Radiators Only) In accordance with FCC requirements of human exposure to radiofrequency fields, the radiating element shall be installed such that a minimum separation distance of 20cm is maintained from the general population.” Conclusion This device complies with the MPE requirements by providing adequate separation between the device, any radiating structure and the general population. 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598


Document Created: 2006-02-10 15:41:45
Document Modified: 2006-02-10 15:41:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC