RF EXPOSURE

FCC ID: SK9C1A-2

RF Exposure Info

Download: PDF

FCCID_506347

Model: C1A-2 Advanced Compliance Solutions FCC ID: SK9C1A-2

General Information:

Applicant: Itron Electricity Metering, Inc.
ACS Project: 04-0396
FCC ID: SK9C1A-2
Device Category: Fixed Mount
Environment: General Population/Uncontrolled Exposure

Technical Information:

Antenna Type: Patch
Antenna Gain: 0dBi
Transmitter Conducted Power: 25.33dBm
Maximum System EIRP: 25.33dBm
Operating Configuration: Mounted on side of residential or commercial structure
Exposure Conditions: Greater than 20 centimeters

MPE Calculation

The minimum separation distance is calculated as follows:
E2
E(V/m) = 30 xPxG Power Density: Pd =(mW/cm2) = 3770
d

MPE Distance
MPE Calculator for Mobile Equipment
Limits for General Population/Uncontrolled Exposure*

Radio Radio Antenna MPE
Transmit Freq. Antenna Gain
Power Power Gain Distance
(MHz) (mW eq.)
(dBm) (W) (dBi) (cm)

917.58 25.33 0.34119 0 1.00 6.67

Installation Guidelines
The installation manual contains the following text advising how to install the equipment to maintain
compliance with the FCC RF exposure requirements:

“RF Exposure (Intentional Radiators Only)
This equipment complies with the FCC RF radiation requirements for uncontrolled environments. To
maintain compliance with these requirements, the antenna and any radiating elements should be installed
to ensure that a minimum separation distance of 20 cm is maintained from the general population.

Conclusion
This device complies with the MPE requirements by providing adequate separation between the device,
any radiating structure and the general population.

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

Document Created: 2005-01-04 10:07:19
Document Modified: 2005-01-04 10:07:19

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC