RF EXPOSURE

FCC ID: SK9AMI-1A

RF Exposure Info

Download: PDF
FCCID_842518

                        Certification Exhibit

                    Composite Device:
    Frequency Hopping Spread Spectrum Transmitter
        Digital Transmission System Transmitter

                            FCC ID: SK9AMI-1A
                              IC: 864G-AMI1A

                   FCC Rule Part: 15.247
         IC Radio Standards Specification: RSS-210

ACS Report Number(s): 07-0272-900-DSS, 07-0272-2400-DTS

            Manufacturer: Itron Electricity Metering Inc.
                 Model(s): CVSO-A, CVSOD-A




                              RF Exposure




     5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598


Model(s): CVSO-A, CVSOD-A                                         FCC ID: SK9AMI-1A              IC: 864G-AMI1A


General Information:
Applicant:               Itron Electricity Metering Inc.
ACS Project:             07-0272
FCC ID:                  SK9AMI-1A
Device Category:         Mobile
Environment:             General Population/Uncontrolled Exposure
Exposure Conditions:     Greater than 20 centimeters
Simultaneous Tx:         No

Technical Information:

                     Radio                       900 MHz LAN               2.4GHz Zigbee
                     Antenna Type               single-band patch         half wavelength slot
                     Antenna Gain                      3dBi                      1dBi
                     Conducted Power                21.92dBm                  18.71dBm
                     Maximum EIRP                    0.310W                     0.094W
                     Maximum ERP                     0.189W                     0.057W

Power Density
      The Power Density (mW/cm2) is calculated as follows:

              PG
        S=
             4πR 2
        Where:
        S = power density (in appropriate units, e.g. mW/cm2)
        P = power input to the antenna (in appropriate units, e.g., mW)
        G = power gain of the antenna in the direction of interest relative to an isotropic radiator
        R = distance to the center of radiation of the antenna (appropriate units, e.g., cm)

                               MPE Calculator for Mobile Equipment
                      Limits for General Population/Uncontrolled Exposure*
 Transmit      Radio         Power        Radio    Antenna Antenna                         Power
                                                                      Distance
Frequency      Power Density Limit        Power      Gain      Gain                        Density
                                                                        (cm)
  (MHz)        (dBm)      (mW/Cm2)        (mW)       (dBi)   (mW eq.)                    (mW/cm^2)
  902.25        21.92         0.60        155.60       3       1.995     20                 0.062
   2405         18.71         1.00         74.30       1       1.259     20                 0.019

Installation Guidelines:
The installation manual shall contain text similar to the following advising how to install the equipment to
maintain compliance with the FCC RF exposure requirements:

“RF Exposure (Intentional Radiators Only)
In accordance with FCC requirements of human exposure to radiofrequency fields, the radiating element
shall be installed such that a minimum separation distance of 20cm is maintained from the general
population.”

Conclusion:
This device complies with the MPE requirements by providing adequate separation between the device,
any radiating structure and the general population.


                 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598



Document Created: 2007-09-11 11:05:38
Document Modified: 2007-09-11 11:05:38

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC