Module Letter

FCC ID: SJC-ETERNA2

Cover Letter(s)

Download: PDF
FCCID_1866537

   December 2, 2012


   Federal Communications Commission
   7435 Oakland Mills Road
   Columbia, MD 21046

   Dear Sir/Madam,

   This letter is to request single modular approval of the ETERNA2 2.4 GHz Wireless Mote per part
   15.212. Dust Networks certifies the following requirements described in part 15.212:

        I. The ETERNA2 module has it’s own RF Shielding
       II. No direct access is provided to the modulator / up converter and as such ETERNA2 can
           not be stimulated to over‐modulate or modify the transmitters data rate
      III. The transmitter has it’s own power supply regulation.
      IV. The ETERNA2 module provides a unique antenna coupler, MMCX.
       V. The ETERNA2 module has been tested in a configuration with supporting hardware will
           the sole purpose of providing power and a control mechanism.
      VI. The ETERNA2 module is labeled with its own FCC ID number, see document 895‐0122
           rev1 LABEL SPEC EXT APPROVALS LTP5901IPC.pdf.
     VII. The ETERNA2 module complies with all specific rules applicable to the transmitter. No
           option is provided to the integrator to modify the operation of the transmitter in this
           regard.
     VIII. The ETERNA2 complies with all RF exposure requirements by specification. The
           ETERNA2 module is not designed to be used so the radiating structure is within 20 cm of
           the body of the user. As such the module does not fall under the definition of a
           portable device per FCC Rules in Section 2.1093. While the ETERNA2 module qualifies as
           a mobile device per FCC Rules in Section 2.1091, the module has a maximum radiated
           output power of 0.01 Watts EIRP. As such, the module is below the 3 W power limit
           that would necessitate environmental evaluation for RF exposure. The ETERNA2 radio
           does not operate in the bands specified by 15.319(i), 15.407(f), 15.253(g) and 15.255(g).

   Sincerely,



   Gordon Charles
   Director of VLSI / Hardware
   Dust Networks, Inc.




phone: 510. 400. 2900 | fax: 510. 489. 3799 |30695 Huntwood Avenue, Hayward, California 94544 | www.dustnetworks.com



Document Created: 2012-12-02 15:33:17
Document Modified: 2012-12-02 15:33:17

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC