Test Report Part 15B

FCC ID: SG720151015G31

Test Report

Download: PDF
FCCID_2781229

Report No.: SET2015-13970 EMC TEST REPORT Report No.: SET2015-13970 Product Name: Mobile phone FCC ID: SG720151015G31 Model No. : G31 Applicant: Haier Telecom (Qingdao) Co.,Ltd. Address: No.1 Haier Road, Hi-tech Zone, Qingdao, China Received Date: 2015-09-15 Tested Date: 2015-09-16—2015-09-25 Issued by: CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd. Lab Location: Electronic Testing Building, Shahe Road, Xili, Nanshan District, Shenzhen, 518055, P. R. China Tel: 86 755 26627338 Fax: 86 755 26627238 This test report consists of 22 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 20 days since the date when the report is received. It will not be taken into consideration beyond this limit. CCIC-SET/T（00） Page 1 of 22

Report No.: SET2015-13970 Test Report Product Name ...................... : Mobile phone Model No. ........................... : G31 Applicant .............................. : Haier Telecom (Qingdao) Co.,Ltd. No.1 Haier Road, Hi-tech Zone, Qingdao, China Applicant Address ............... : Haier Telecom (Qingdao) Co.,Ltd. Manufacturer........................ : No.1 Haier Road, Hi-tech Zone, Qingdao, China Manufacturer Address ........ : Test Standards ..................... : 47 CFR Part 15 Subpart B: Radio Frequency Devices Test Result ........................... : PASS Tested by ............................ : 2015.09.27 Xiaolong Zhang, Test Engineer Reviewed by......................... : 2015.09.27 Shuangwen Zhang, Senior Engineer Approved by ........................ : 2015.09.27 Wu Li’an, Manager CCIC-SET/T（00） Page 2 of 22

Report No.: SET2015-13970 TABLE OF CONTENTS 1. GENERAL INFORMATION ....................................................................................................4 1.1 EUT Description .........................................................................................................................4 1.2 Test Standards and Results ........................................................................................................5 1.3 Facilities and Accreditations ......................................................................................................6 1.3.1 Facilities ....................................................................................................................................6 1.3.2 Test Environment Conditions ....................................................................................................6 1.3.3 Measurement Uncertainty .........................................................................................................6 2. TEST CONDITIONS SETTING...............................................................................................7 2.1 Test Peripherals ..........................................................................................................................7 2.2 Test Mode ....................................................................................................................................7 2.3 Test Setup and Equipments List ................................................................................................8 2.3.1 Conducted Emission..................................................................................................................8 2.3.2 Radiated Emission .....................................................................................................................8 3. 47 CFR PART 15B REQUIREMENTS .................................................................................. 11 3.1 Conducted Emission ................................................................................................................. 11 3.1.1 Requirement ............................................................................................................................ 11 3.1.2 Test Description ...................................................................................................................... 11 3.1.3 Test Result ............................................................................................................................... 11 3.2 Radiated Emission ....................................................................................................................14 3.2.1 Requirement ............................................................................................................................14 3.2.2 Test Description ......................................................................................................................15 3.2.3 Test Result ...............................................................................................................................15 4. PHOTOGRAPHS OF THE EUT ............................................................................................20 5. PHOTOGRAPHS OF THE TEST SET-UP ...........................................................................21 Change History Issue Date Reason for change 1.0 2015.09.27 First edition CCIC-SET/T（00） Page 3 of 22

Report No.: SET2015-13970 1. GENERAL INFORMATION 1.1 EUT Description EUT Name ........................... : Mobile phone FCC ID ................................. : SG720151015G31 Trade Name………………..: Haier Brand Name…………………: Haier Hardware Version ................. : H01 Software Version .................. : V17_S72B_H01_S001 Power Supply ....................... : Battery Brand Name: Haier Model No.: H15370 Capacitance: 2000 mAh Rated Voltage: 3.8V Charge Limit: 4.35V Ancillary Equipment 1 ......... : AC Adapter (Charger for Battery) Brand Name: Haier Model No.: YSN05100CE76 Rated Input: 100-240V, 50/60Hz ,0.2A Rated Output: 5V 1000mA Note1:The EUT is a Mobile phone, it supports the following operating frequency band:GSM850/1900, WCDMA850/1900,GPS(only receiver),802.11b,802.11g,802.11n20,802.11n40,Bluetooth4.0. Note2:The EUT is equipped with a T-Flash card slot; equipped with a USB port which can be connected to the ancillary equipments. Note 3:For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. CCIC-SET/T（00） Page 4 of 22

Report No.: SET2015-13970 1.2 Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 15 Subpart B: No. Identity Document Title 1 47 CFR Part 15 Radio Frequency Devices Subpart B 2014 Test detailed items/section required by FCC rules and results are as below: No. Section Description Result 1 15.107 Conducted Emission PASS 2 15.109 Radiated Emission PASS NOTE: (1) The EUT has been tested according to 47 CFR Part 15 Subpart B,Class B.The test procedure is according to ANSI C63.4:2009. CCIC-SET/T（00） Page 5 of 22

Report No.: SET2015-13970 1.3 Facilities and Accreditations 1.3.1 Facilities CNAS-Lab Code: L1659 CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd. CCIC is a third party testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L1659. A 12.8*6.8*6.4 (m) fully anechoic chamber was used for the radiated spurious emissions test. FCC-Registration No.: 406086 CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acce- ptance letter from the FCC is maintained in our files. Registration 406086, valid time is until October 28, 2017. 1.3.2 Test Environment Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): 15°C - 35°C Relative Humidity (%): 25% -75% Atmospheric Pressure (kPa): 86kPa-106kPa 1.3.3 Measurement Uncertainty The uncertainty is calculated using the methods suggested in the "Guide to the Expression of Uncertainty in Measurement" (GUM) published by ISO. Uncertainty of Conducted Emission: Uc = 3.6 dB (k=2) Uncertainty of Radiated Emission: Uc = 4.5 dB (k=2) CCIC-SET/T（00） Page 6 of 22

Report No.: SET2015-13970 2. TEST CONDITIONS SETTING 2.1 Test Peripherals The following is a listing of the EUT and peripherals utilized during the performance of EMC test: FCCID Description Manufacturer Model Serial No. /DOC Notebook ThinkPad E430C A131101550 / Micro SD card SanDisk / / / Mouse deiog / / DOC 2.2 Test Mode (1) The first test mode The EUT configuration of the emission tests is TransFlash Card + EUT + Battery + PC. In this test mode, the EUT with a TransFlash Card embedded is connected with a PC via a USB cable supplied by applicant. During the measurement, the data is transmitting between the PC and the TransFlash Card of the EUT. CCIC-SET/T（00） Page 7 of 22

Report No.: SET2015-13970 2.3 Test Setup and Equipments List 2.3.1 Conducted Emission A. Test Setup: < 40cm > < 80cm > Common Antenna EUT Pulse Limiter < 80cm > LISN Receiver System Simulator The EUT is placed on a 0.8m high insulating table, which stands on the grounded conducting floor, and keeps 0.4m away from the grounded conducting wall. The EUT is connected to the power mains through a LISN which provides 50Ω/50µH of coupling impedance for the measuring instrument. The Common Antenna is used for the call between the EUT and the System Simulator (SS). A Pulse Limiter is used to protect the measuring instrument. The factors of the whole test system are calibrated to correct the reading. B. Equipments List: Calibration Calibration Description Manufacturer Model Serial No. Date Due. Date Test Receiver ROHDE&SCHWARZ ESCI A130901475 2015.09.09 2016.09.08 LISN ROHDE&SCHWARZ ENV216 / 2015.04.28 2016.04.27 Cable MATCHING PAD W7 / 2015.06.05 2016.06.04 2.3.2 Radiated Emission A. Test Setup: CCIC-SET/T（00） Page 8 of 22

Report No.: SET2015-13970 1) For radiated emissions from 30MHz to1GHz 2) For radiated emissions above 1GHz B. Test Procedure The test is performed in a 3m Semi-Anechoic Chamber; the antenna factor, cable loss and so on of the site (factors) is calculated to correct the reading. The EUT is placed on a 0.8m high insulating Turn Table, and keeps 3m away from the Test Antenna, which is mounted on a CCIC-SET/T（00） Page 9 of 22

Report No.: SET2015-13970 variable-height antenna master tower. For the test Antenna: 1) In the frequency range above 30MHz, Bi-Log Test Antenna (30MHz to 1GHz) and Horn Test Antenna (above 1GHz) are used. Test Antenna is 3m away from the EUT. Test Antenna height is varied from 1m to 4m above the ground to determine the maximum value of the field strength. The emission levels at both horizontal and vertical polarizations should be tested. C. Equipments List: Calibration Calibration Description Manufacturer Model Serial No. Date Due. Date Test Receiver ROHDE&SCHWARZ ESIB7 A0501375 2015.06.10 2016.06.09 Test Receiver ROHDE&SCHWARZ ESIB26 A0304218 2015.06.10 2016.06.09 Semi-Anechoic Albatross 9m*6m*6m A0412372 2015.03.22 2016.03.21 Chamber Test Antenna - HP CBL6111A A9704202 2015.06.10 2016.06.09 Bi-Log Test Antenna – ROHDE&SCHWARZ HF906 A0304225 2015.06.10 2016.06.09 Horn Anechoic SAC-5MAC Albatross A0304210 2015.03.22 2016.03.21 Chamber 12.8x6.8x6.4m MITEQ Amplifier ROHDE&SCHWARZ AFS42-001018 A0509366 2015.06.10 2016.06.09 1G~18GHz 00 Amplifier Compliance Direction PAP-0203H A0509377 2015.06.10 2016.06.09 20M~3GHz System SUCOFLEX Cable SUNHNER / 2015.06.10 2016.06.09 100 SUCOFLEX Cable SUNHNER MY1758/4 2015.06.10 2016.06.09 104 CCIC-SET/T（00） Page 10 of 22

Report No.: SET2015-13970 3. 47 CFR PART 15B REQUIREMENTS 3.1 Conducted Emission 3.1.1 Requirement According to FCC section 15.107, the radio frequency voltage that is conducted back onto the AC power line on any frequency within the band 150kHz to 30MHz shall not exceed the limits in the following table, as measured using a 50µH/50Ω line impedance stabilization network (LISN). Conducted Limit (dBµV) Frequency range (MHz) Quasi-peak Average 0.15 - 0.50 66 to 56 56 to 46 0.50 - 5 56 46 5 - 30 60 50 NOTE: a) The limit subjects to the Class B digital device. b) The lower limit shall apply at the band edges. c) The limit decreases linearly with the logarithm of the frequency in the range 0.15 - 0.50MHz. 3.1.2 Test Description See section 2.3.1 of this report. 3.1.3 Test Result The maximum conducted interference is searched using Peak (PK), Quasi-peak (QP) and Average (AV) detectors; the emission levels more than the AV and QP limits, and that have narrow margins from the AV and QP limits will be re-measured with AV and QP detectors. Tests for both L phase and N phase lines of the power mains connected to the EUT are performed. All test modes are considered, refer to recorded points and plots below. CCIC-SET/T（00） Page 11 of 22

Report No.: SET2015-13970 A. Test Plot and Suspicious Points: (Plot A: L Phase) Conducted Disturbance at Mains Terminals L Test Data QP AV Frequen Measurem Frequen Measurem Limits Margin Limits Margin cy ent Value cy ent Value (dBV) (dB) (dBV) (dB) (MHz) (dBV) (MHz) (dBV) 0.4785 56.40 47.16 9.24 0.4785 46.40 38.26 8.14 0.5100 56.00 45.35 10.65 0.5100 46.00 36.34 9.66 1.0230 56.00 45.26 10.74 1.0230 46.00 36.12 9.88 CCIC-SET/T（00） Page 12 of 22

Report No.: SET2015-13970 (Plot B: N Phase) Conducted Disturbance at Mains Terminals N Test Data QP AV Frequen Measureme Measureme Limits Margin Frequency Limits Margin cy nt Value nt Value (dBV) (dB) (MHz) (dBV) (dB) (MHz) (dBV) (dBV) 0.4695 56.50 43.69 12.81 0.4695 46.50 33.64 12.86 0.5050 56.00 41.61 14.39 0.5050 46.00 31.67 14.33 0.6720 56.00 41.64 14.36 0.9420 46.00 30.29 15.71 Test Result: PASS CCIC-SET/T（00） Page 13 of 22

Report No.: SET2015-13970 3.2 Radiated Emission 3.2.1 Requirement According to FCC section 15.109, the field strength of radiated emissions from unintentional radiators at a distance of 3 meters shall not exceed the following values: Frequency Field Strength Field Strength Limitation at 3m Measurement Dist range (MHz) µV/m Dist (uV/m) (dBuV/m) 0.009 - 0.490 2400/F(kHz) 300m 10000* 2400/F(kHz) 20log 2400/F(kHz) + 80 0.490 - 1.705 2400/F(kHz) 30m 100* 2400/F(kHz) 20log 2400/F(kHz) + 40 1.705 - 30.00 30 30m 100*30 20log 30 + 40 30.0 - 88.0 100 3m 100 20log 100 88.0 - 216.0 150 3m 150 20log 150 216.0 - 960.0 200 3m 200 20log 200 Above 960.0 500 3m 500 20log 500 a) As shown in FCC section 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector. When average radiated emission measurements are specified in this part, including emission measurements below 1000MHz, there also is a limit on the radio frequency emissions, as measured using instrumentation with a peak detector function, corresponding to 20dB above the maximum permitted average limit for the frequency being investigated unless a different peak emission limit is otherwise specified in the rules. b) Test Antenna is 3m away from the EUT. Test Antenna height is varied from 1m to 4m above the ground to determine the maximum value of the field strength. c) For below 1G :QP detector RBW 120kHz ,VBW 300kHz. d) For Above 1G: PK detector RBW 1MHz,VBW 3MHz for PK value ;PK detector RBW 1MHz, VBW 10Hz for AV value. Note: 1) The tighter limit shall apply at the boundary between two frequency range. 2) Limitation expressed in dBuV/m is calculated by 20log Emission Level(uV/m). 3) If measurement is made at 3m distance, then F.S Limitation at 3m distance is adjusted by using the formula of Ld1 = Ld2 * (d2/d1)2. Example: F.S Limit at 30m distance is 30uV/m, then F.S Limitation at 3m distance is adjusted as Ld1 = L1 = 30uV/m * (10)2 = 100 * 30uV/m. CCIC-SET/T（00） Page 14 of 22

Report No.: SET2015-13970 3.2.2 Test Description See section 2.3.2 of this report. 3.2.3 Test Result The maximum radiated emission is searched using PK, QP and AV detectors; the emission levels more than the limits, and that have narrow margins from the limits will be re-measured with AV and QP detectors. Both the vertical and the horizontal polarizations of the Test Antenna are considered to perform the tests. All test modes are considered, refer to recorded points and plots below. The amplitude of spurious emissions which are attenuated more than 20 dB below the permissible value need not be reported. Note: All radiated emission tests were performed in X, Y, Z axis direction, and only the worst axis test condition was recorded in this test report. CCIC-SET/T（00） Page 15 of 22

Report No.: SET2015-13970 B. Test Plots and Suspicious Points: Test result of radiated emission below 1GHz (Plot C: Test Antenna Vertical 30M - 1G) Antenna Frequency QuasiPeak Bandwidth Limit Margin height Antenna Verdict (MHz) (dBμV/m) (kHz) (dBμV/m) (dB) (cm) 30.59000 27.68 120.000 210.0 40.00 12.32 Vertical Pass 362.58000 39.49 120.000 187.0 46.00 6.51 Vertical Pass 480.69000 35.37 120.000 230.0 46.00 10.63 Vertical Pass CCIC-SET/T（00） Page 16 of 22

Report No.: SET2015-13970 (Plot D:Test Antenna Horizontal 30M - 1G) Antenna Frequency QuasiPeak Bandwidth Limit Margin height Antenna Verdict (MHz) (dBμV/m) (kHz) (dBμV/m) (dB) (cm) 30.36000 28.58 120.000 272.0 40.00 11.42 Horizontal Pass 182.34000 29.41 120.000 158.0 43.50 14.09 Horizontal Pass 362.45000 38.16 120.000 194.0 46.00 7.84 Horizontal Pass CCIC-SET/T（00） Page 17 of 22

Report No.: SET2015-13970 Test result of radiated emission above 1GHz (Plot E: Test Antenna Horizontal 1G – 6G) (Plot F: Test Antenna Vertical 1G – 6G) CCIC-SET/T（00） Page 18 of 22

Report No.: SET2015-13970 Note: The test result margin of radiated emission above 1GHz is more than 20dB. Test Result: PASS CCIC-SET/T（00） Page 19 of 22

Report No.: SET2015-13970 4. PHOTOGRAPHS OF THE EUT CCIC-SET/T（00） Page 20 of 22

Report No.: SET2015-13970 5. PHOTOGRAPHS OF THE TEST SET-UP Conducted Emission Radiated Emission of 30M-1G CCIC-SET/T（00） Page 21 of 22

Report No.: SET2015-13970 Radiated Emission of 1-6G ** END OF REPORT ** CCIC-SET/T（00） Page 22 of 22


Document Created: 2015-10-12 14:29:47
Document Modified: 2015-10-12 14:29:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC