TEST REPORT

FCC ID: SG70701HG-A7I

Test Report

Download: PDF
FCCID_773487

ORLAB® 47 CFR PART 15 SUBPART B TEST REPORT of 850/1900 Dual—band Handset Model Name: HG—A7I Trade Name: Haier Report No.: $Z07010069E03 FCC ID: SG70701HG—A7I preparedfor Qingdao Haier Telecom Co., Ltd. No.1,Haier Road,Hi—tech Zone,Qingda0,266101,P.R.China * GCF‘ M: %::::-l: Gfi enc EE:T NOTE: This test report can be duplicated completelyfor the legal use with the approval of the applicant, it shall not be reproduced except in full, without the written approval of Shenzhen Morlab Communications Technology Co., Ltd. Any objections should be raised to us within thirty workdays since the date of issue.

Report No.: SZ07010069E03 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ..........................................................................................3 2. GENERAL INFORMATION ....................................................................................................4 2.1 Equipment under Test (EUT) Description ...............................................................................4 2.2 Test Standards and Results ........................................................................................................5 2.3 Facilities and Accreditations......................................................................................................6 2.3.1 Facilities ....................................................................................................................................6 2.3.2 Test Equipments ........................................................................................................................6 2.3.3 Test Environment Conditions....................................................................................................7 3. 47 CFR PART 15B REQUIREMENTS ....................................................................................8 3.1 General Information...................................................................................................................8 3.1.1 EUT Function and Test Mode ...................................................................................................8 3.1.2 Test Setup ..................................................................................................................................9 3.2 Conducted Emission .................................................................................................................11 3.2.1 Requirement ............................................................................................................................11 3.2.2 Test Procedure.........................................................................................................................11 3.2.3 Test Result...............................................................................................................................12 3.3 Radiated Emission ....................................................................................................................14 3.3.1 Requirement ............................................................................................................................14 3.3.2 Test Procedure.........................................................................................................................14 3.3.3 Test Result...............................................................................................................................15 ĉ PHOTOGRAPH OF THE TEST SETUP ...................................................................................17 Ċ PHOTOGRAPH OF THE EUT...................................................................................................18 Page 2 of 27

Report No.: $Z07010069E03 1. Test Result Certification Equipment under Test: 850/1900 Dual—band Handset Trade Name: Haier Model Name: HG—A7I FCC ID: $G70701HG—A71 Applicant: Qingdao Haier Telecom Co., Ltd. No.1,Haier Road,Hi—tech Zone.Qingdao,266101,P.R.China Manufacturer: Qingdao Haier Telecom Co., Ltd. No.1,Haier Road,Hi—tech Zone,Qingdao,266101,P.R.China Test Standards: 47 CFR Part 15 Subpart B Test Result: PASS * We hereby certify that: The equipment undertest was tested by Shenzhen Morlab Communications Technology Co., Ltd. The test data, data evaluation, test procedures and equipment configurations shown in this report were made in accordance with the requirement of related FCC rules. The test results ofthis report only apply for the tested sample equipment identified above. The test reportshall be invalid without all the signatures ofthe test engineer,the reviewer and the approver. Tested by: Reviewed by: ... \%/K%\’x Yang Bo § Shu Luan Page 3 of27

Report No.: SZ07010069E03 2. General Information 2.1 Equipment under Test (EUT) Description EUT1 / MS: Description ...........................: 850/1900 Dual-band Handset Model Name .........................: HG-A7I Serial No...............................: N/A IMEI .....................................: N/A Hardware Version .................: P1 Software Version ..................: H01-S003-NA EUT2 / Battery: Description ...........................: Li-ion Battery Model Name .........................: H11092 Trade Name ..........................: Haier Serial No...............................: N/A Manufacturer ........................: BYD Company Limited(QING DAO) Capacitance...........................: 560mAh Rated Voltage........................: 3.7V Charge Limit Voltage............: 4.2V EUT3 / Charger: Description ...........................: Travel Charger Model Name .........................: H21080 Trade Name ..........................: Haier Serial No...............................: N/A Manufacturer ........................: NINGBO LISHUNDA ELECTRON CO.,LTD. Rated Input ...........................: ~ 100-240V, 50/60Hz, 0.15A Rated Output.........................: 5.0V, 550mA Length of DC Cable..............: 160cm NOTE: 1. The EUT consists of EUT1/MS and normal options EUT2/Battery and EUT3/Charger. 2. For the detailed function of the EUT and test mode used, please refer to section 3.1.1. 3. For detailed features about the EUT, please see user manual supplied by applicant. Page 4 of 27

Report No.: SZ07010069E03 2.2 Test Standards and Results The objective of the report is to perform EMC tests according to 47 CFR Part 15 Subpart B, and the EUT is classified as a Class B digital device: No. Identity Document Title 1 47 CFR Part 15 Radio Frequency Devices (10-1-05 Edition) Test detailed items and the results are as below: No. Rules Test Type Result Date of Test 1 §15.107 Conducted Emission PASS 2007-3-5 2 §15.109 Radiated Emission PASS 2007-3-5 Page 5 of 27

Report No.: SZ07010069E03 2.3 Facilities and Accreditations 2.3.1 Facilities Shenzhen Electronic Product Quality Testing Center (Morlab) is a testing organization accredited by China National Accreditation Board for Laboratories (CNAL) according to ISO/IEC 17025. The accreditation certificate number is L1659. All measurement facilities used to collect the measurement data are located at Electronic Testing Building, Shahe Road, Xili, Nanshan District, Shenzhen, P. R. China. The site was constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 and CISPR Publication 22, the FCC registration number is 741109. 2.3.2 Test Equipments No. Description Specification 1 System Simulator Manufacturer: Rohde&Schwarz Model No.: CMU200 Serial No.: 100448 2 System Simulator Manufacturer: Agilent Model No.: E5515C Serial No.: GB43130131 3 Receiver Manufacturer: Agilent Model No.: E7405A Serial No.: US44210471 4 LISN Manufacturer: Schwarzbeck Model No.: NSLK8127 Serial No.: 8127449 5 Telecommunication Manufacturer: European Antennas Antenna Model No.: PSA-45010R/356 Serial No.: 403688-001 6 Trilogy Antenna Manufacturer: Schwarzbeck Model No.: VULB 9163 Serial No.: 9163-274 7 Anechoic Chamber Manufacturer: Albatross Projects GmbH 8 Shield Room Manufacturer: Albatross Projects GmbH NOTE: 1. Equipments listed above have been calibrated and are in the period of validation. Page 6 of 27

Report No.: SZ07010069E03 2.3.3 Test Environment Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature: 20 - 25°C Relative Humidity: 40 - 50% Atmospheric Pressure: 86 - 106kPa Page 7 of 27

Report No.: SZ07010069E03 3. 47 CFR Part 15B Requirements 3.1 General Information 3.1.1 EUT Function and Test Mode Mode 1: Call Mode: The EUT configuration of the emission tests was MS + Battery + Charger +Headset. Before the measurement, the lithium battery was completely discharge. A communication link was established between the MS and a System Simulator (SS). The MS operated at mid ARFCN and maximum output power (level 5 for GSM 850 MHz and level 0 for PCS 1900 MHz). Mode 2: Idle Mode: The EUT configuration of the emission tests was MS + Battery + Charger +Headset. Before the measurement, the lithium battery was completely discharge. The EUT was synchronized to the BCCH, listening to the CCCH and able to respond to paging message. Periodic location updating was disabled. Page 8 of 27

Report No.: SZ07010069E03 3.1.2 Test Setup 3.1.2.1 Conducted Emission Test Communication 40cm 80cm Antenna >80cm EUT 80cm LISN Receiver System Simulator 1. The test is performed in a Shield Room; the factors of the test system are calibrated to correct the reading. 2. The EUT is placed on a 0.8 meters high insulating table and keeps 0.4 meters away from the conducting wall of the Shield Room. 3. The EUT is connected to the power mains through a Line Impedance Stabilization Network (LISN). The LISN provides 50ȍ/50ȝH of coupling impedance for the measuring instrument. Page 9 of 27

Report No.: SZ07010069E03 3.1.2.2 Radiated Emission Test Master 3m Communication Antenna Test Antenna EUT 1m ... 4m 80cm Turn Table System Receiver Simulator 1. The test is performed in a Semi-anechoic Chamber; the factors of the test system are calibrated to correct the reading. 2. The EUT is placed on a 0.8 meters high insulating table and keeps 3 meters away from the trilogy Test Antenna, which is mounted on the top of a variable-height antenna Master tower. Page 10 of 27

Report No.: SZ07010069E03 3.2 Conducted Emission 3.2.1 Requirement According to FCC §15.107, the radio frequency voltage that is conducted back onto the AC power line on any frequency within the band 150kHz to 30MHz shall not exceed the limits in the following table, as measured using a 50ȝH/50ȍ line impedance stabilization network (LISN). Conducted Limit (dBȝV) Frequency range (MHz) Quasi-peak Average 0.15 - 0.50 66 to 56 56 to 46 0.50 - 5 56 46 0.50 - 30 60 50 NOTE: 1. The limit subjects to the Class B digital device. 2. The lower limit shall apply at the band edges. 3. The limit decreases linearly with the logarithm of the frequency in the range 0.15MHz to 0.50MHz. 3.2.2 Test Procedure 1. Perform test setup as described in section 3.1.2.1. 2. Each test mode in section 3.1.1 should be applied. At each test mode, the frequency range from 150 kHz to 30MHz is searched using the CISPR Quasi-Peak and/or the Average detector of the Receiver. If the emission levels measured with Quasi-Peak detector are lower than the Average Limit, it’s not necessary to measure with Average detector. 3. The emission levels at both L phase and N phase should be tested. 4. Record the test result plot and distinct points. 5. In the test report show the worst test data. Page 11 of 27

Report No.: SZ07010069E03 3.2.3 Test Result Test Mode: 1, 2 According the test data, the worst test configuration of the EUT was Mode 1, and its test data was showed as the follow: Limit Value (dBPV) Emission Level (dBPV) No. Freq. (MHz) QP AV QP AV 1 0.2300 62.4 52..4 49.7 41.9 2 0.3490 58.9 48.9 48.0 40.5 3 0.5780 56.0 46.0 44.0 34.7 4 0.8130 56.0 46.0 48.4 38.5 5 1.2410 56.0 46.0 36.4 22.8 6 1.8390 56.0 46.0 43.9 29.5 Page 12 of 27

Report No.: SZ07010069E03 1. Plot for L Phase: 2. Plot for N Phase: Page 13 of 27

Report No.: SZ07010069E03 3.3 Radiated Emission 3.3.1 Requirement According to FCC §15.109, the field strength of radiated emissions from unintentional radiators at a distance of 3 meters shall not exceed the following values: Field Strength Frequency range (MHz) ȝV/m dBȝV/m 30 - 88 100 40 88 - 216 150 43.5 216 - 960 200 46 Above 960 500 54 NOTE: 1. Field Strength (dBȝV/m) = 20*log[Field Strength (ȝV/m)]. 2. In the emission tables above, the tighter limit applies at the band edges. 3.3.2 Test Procedure 1. Perform test setup as described in section 3.1.2.2. 2. Each test mode in section 3.1.1 should be applied. At each test mode, the Turn Table turns from 0 degrees to 360 degrees to find the maximum reading; for the suspected points, the Test Antenna varies from 1 meter to 4 meters to determine the maximum value of the field strength. 3. The Receiver is set to Peak Detector function and specified bandwidth with maximum hold mode. If the emission level of the EUT in peak mode is 6dB lower than the limit specified, then testing could be stopped and the peak values would be reported; otherwise the emission less than 6dB margins would be retested one by one using the quasi-peak method. 4. The emission levels at both horizontal and vertical polarizations should be tested. 5. Record the test result plot and distinct points. 6. In the test report show the worst test data. Page 14 of 27

Report No.: SZ07010069E03 3.3.3 Test Result Test Mode: 1, 2 According the test data, the worst test configuration of the EUT was Mode 1, and its test data was showed as the follow: Frequency Emission Level (dBȝV/m) Quasi-Peak No. Result (MHz) Peak Quasi-Peak Antenna Polarization Limit (dBȝV/m) 1 51.80 32.05 --- Vertical < 40 PASS 2 123.78 28.57 --- Vertical < 40 PASS 3 441.06 26.16 --- Vertical < 43.5 PASS 4 36.98 25.88 --- Horizontal < 43.5 PASS 5 124.08 30.04 --- Horizontal < 43.5 PASS 6 258.85 26.79 --- Horizontal < 46 PASS Page 15 of 27

Report No.: SZ07010069E03 Following is the plots for emission measurement; please note that marked spikes with circle should be ignored because they are MS and SS carrier frequency. 1. Plot when Test Antenna at Horizontal Polarization: EN55022 Limit RBW: 120 kHz, Horizontal Peak Max 130 120 110 100 90 80 Emission (dBuV/m) 70 60 50 40 30 20 10 0 30 M 50 M 100 M 200 M 300 M 500 M 1000 M 2. Plot when Test Antenna at Vertical Polarization: EN55022 Limit RBW: 120 kHz, Vertical Peak Max 110 100 90 80 70 Emission (dBuV/m) 60 50 40 30 20 10 0 30 M 50 M 100 M 200 M 300 M 500 M 1000 M Page 16 of 27

Report No.: SZ07010069E03 ĉ Photograph of the test setup 1. Mains Terminal Disturbance Voltage Measurement 2. Radiated Field Strength Measurement Page 17 of 27

Report No.: SZ07010069E03 Ċ Photograph of the EUT 1. Appearance of the EUT Page 18 of 27

4\"

FMlorLas! ~eup

Report No.: SZ07010069E03 2. Appearance of the Adapter Page 21 of 27

Report No.: SZ07010069E03 3. Inside of the Adapter Page 22 of 27

Report No.: SZ07010069E03 4. Inside of the EUT Page 23 of 27




Report No.: SZ07010069E03 5. Appearance of the headset Page 27 of 27


Document Created: 2007-03-20 17:19:35
Document Modified: 2007-03-20 17:19:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC