User Manual

FCC ID: SF4-SH731

Users Manual

Download: PDF
FCCID_3432343

EVOLUTION 2 Quick Start Guide BLUETOOTH HEADPHONES Item # MZX667 1. Make sure the following items are 2. For a look at the various buttons and parts of your headphones, 3. Charging: When charging, a red LED light will illuminate. and the red LED included in your package. view the graphic below. indicator light turn off when fully charged. Your headphones can take up to two hours to fully charge. Volume Down/Previous Volume Up/NEXT AUX Cable Microphone Charging Port Power/Play/Pause/Answer&LED Light Auxiliary Port MZX667 Headhones Indicater USB Cable 4. Power ON/Power OFF Your Headphones: 5. Pairing Your Headphones With a Bluetooth Phone -Press and hold the Power button for approximately 3 seconds to power on -Press and hold the Power button for around 3 seconds. When your your headphones. Your headphones will automatically connect with the last headphone is ready to pair with a Bluetooth audio source, it will go phone they were paired with. into pairing mode, with red and blue LED lights will flash alternately. -Once powered on, you can press and hold the -Go to the Bluetooth Manager of your Bluetooth device. Search 12:12 PM Bluetooth Power button again for approximately 3 Bluetooth devices and select "Evolution 2" to start connecting. seconds to power off your headphones. The Bluetooth ON LED Indicator light will briefly turn red before 3 Seconds -If required, enter the PIN code "0000" and confirm the entry. Once powering off. paired, the headphone will connect to your Bluetooth device 3 Seconds Devices automatically. Evolution 2 Paired NOTE: In order to save power, your headphones will automatically Now discoverable power off if left unpaired and idle for over 10 minutes. 6. Listening to Music 7. Using Your Headphones During Phone Calls Important Note You can also use the 3.5mm Audio Cable to connect audio devices through the Play/Pause Last Number Redialing Auxilliary Port on your headphones. Press the Power button: To play or pause music. Quickly tap on the Answer button twice and the last number that you dialed will be redialed. Next/Previous Song Note that when using the Audio cable instead of Press and hold the Volume Up or Volume Answering an Incoming Call the standard wireless Bluetooth connection, the Down buttons for 2 seconds to advance to the To answer an incoming call, quickly press the Volume Up, Volume Down and Play/Pause next song or go back to the previous one. Answer button. buttons do not function. Please use your audio source to control these Increase/Decrease Volume Ending a Call functions. Press the Volume Up or Volume To end a call, quickly press the Answer Down buttons to increase or decrease the button. volume. Adjusting Volume NOTE: Music will automatically pause when By pressing the Volume Up or Volume Technical Support a call is dialed out or when there is Down buttons you can increase or For technical support issues please visit our website at www.alteclansing.com. an incoming call. It will resume when decrease the volume of the phone call. You can find manuals and FAQ's at the website. Can't find what you are looking for? Call the call ends. 1-855-292-4087 to access our technical support information on the phone.

EVOLUTION 2 Quick Start Guide BLUETOOTH HEADPHONES Item # MZX667 S O F T P A DDE D H EA DBA ND & EA R CUPS Provides hours of listening comfort Altec Lansing One Year Warranty Card This warranty covers the original consumer purchaser only and is not transferable. E X TE N DA BLE H EA DBA ND Extends for extra comfort This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. S O UND Warm and rich bass sound that brings out the best in music What Is Not Covered by Warranty Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, D IS PLAY repair by unauthorized parties, tampering, modification or accident. Displays battery life on iPhone or iPad To Obtain Warranty Service and Troubleshooting information: MIC R OP H O NE Call 1-855-292-4087 or Visit our website at www.alteclansing.com. Conveniently built-in mic To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem S PE CIF ICA T I ONS determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within the applicable Drivers: 40mm Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along Frequency range: 20Hz-20kHz with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANT-ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR'S SOLE DISCRETION -ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER'S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGI- NAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies. This product is manufactured, distributed and sold by SAKAR International, Inc. All other trademarks are the property of the respective owner, who has not sponsored, endorsed or approved this product. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference , and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. Uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions. May cause harmful interference to radio or -television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: FCC ID: SF4-SH731 __ Reorient or relocate the receiving antenna. __ Increase the separation between the equipment and receiver. __ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. __ Consult the dealer or experienced radio/ TV technician for help. Ver B


Document Created: 2017-06-20 11:40:47
Document Modified: 2017-06-20 11:40:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC