Users Manual

FCC ID: SF4-G328

Users Manual

Download: PDF
FCCID_1363789

EX-02 s NEXT GEN MODEL G328A This product is not designed, manufactured, sponsored or endorsed by Sony Computer Entertainment Inc. or any of its divisions. PS3™ is a trademark BLUETOOTH® HEADSET FOR PS3™ EXCLUSIVELY DESIGNED FOR GAMING ON PS3 ™ of Sony Computer Entertainment Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Gioteck is under license. Specification & appearance are subject to change without prior notice. Copyright © 2010 GBB Group. All Rights Reserved.

thank you features & details Thank you for purchasing the EX-02s Next Gen Bluetooth® Headset from Gioteck. We hope that this product Following hot on the heels of the best selling EX-01, we are proud to bring you the EX-02s Next Gen Bluetooth® will go beyond your expectations for a quality accessory. Please read this booklet thoroughly before using the Headset, featuring a state-of-the-art chipset with built-in noise cancelling for optimum voice clarity, coupled product and review the PS3™ manual for additional details regarding PS3™ operation. Thank you & enjoy! with an incredibly long battery life. Now wearing a sleeker design overall with removable faceplates, so as to fine-tune your enjoyment online. precautions warnings • Use only as intended. This symbol indicates important 01 | Microphone installation, operation or 03 07 • This is a precision product and should be handled with care. maintenance instructions. Always 02 | Speaker follow these instructions closely. 06 • To avoid electrical shock, do 03 | Earhook not take the product apart. This symbol is intended to alert 02 the user to the presence of 04 | LED Feedback • Do not store in areas of 05 potentially harmful or dangerous extreme heat or cold. substances within the product’s 05 | Volume Decrease CONTENTS • Do not allow product to get enclosure. This symbol may also 06 | Power / Mute / Reconnect wet or dirty; doing so may indicate a procedure that will 02 | Contents & Precautions damage the product. void your product warranty. 07 | Volume Increase 03 | Features & Details • Do not clean with benzene; Recycling is important and will paint thinner, acetone, alcohol, help to protect our environment 04 04 | Setup or other such solvents. and reduce landfill waste. 06 | Reversing Earhook • Contains small parts. This symbol on the product 01 Not suitable for children or in the manual means that 08 | Charging under 3 years of age. your electronic equipment 09 | Operation should NOT be disposed of in normal household waste at 10 | Troubleshooting the end of its life. It should be 11 | Care & Maintenance disposed of separately. Please take it to a collection point for electrical waste. 02 | CONTENTS & PRECAUTIONS FEATURES & DETAILS | 03

pairing your headset 1. Within the Settings' menu, 2. Press X on the icon labelled: 3. Press X on Yes to register your 7. Press X to enter 0000 (four zeros) 8. You will be taken to a new screen 9. Press twice on your controller press X on Accessory Settings. Manage Bluetooth® Device. Bluetooth® Device. as the Pass Key and press X on OK. stating: Register completed. to go back to Accessory Settings. 3 SECONDS 4. At the next screen, prepare your 5. Press X to Start Scanning. Once 6. Locate PS3 EX-02s from the list 10. Scroll down and press X 11. Choose PS3 EX-02s as your input 12. Scroll down and press X on OK. headset (from off) to be paired by the scan is complete, the PS3™ of available devices and press X. on Audio Device Settings. and output device from the lists. Your EX-02s Next Gen holding down the power button will recognize all Bluetooth® Press X to confirm your choices. Bluetooth® Headset is now continuously until the LEDs flash wireless technology devices ready to use...enjoy :) alternate Blue & Red. When it is within range. connected the LEDs will flash Blue every 2 seconds. If not connected, it will flash blue every 4 seconds. 04 | SETUP SETUP | 05

reversing the earhook The EX-02s ships with two earhooks, each marked [L] for the left ear and [R] for the right ear. After selecting the appropriate earhook, follow the instructions below: EARHOOK HOLES EARHOOK PINS Using your Lift clear Noting the 4 Line-up the Replace the Push the fingernail, from the body. earhook pins, earhook holes faceplate by faceplate into carefully pry gently pull away with the pins and slowly pushing the place firmly the faceplate the existing gently guide the faceplate hooks to secure. off the headset earhook, and replacement into the slots on upwards and store safely. earhook over the the headset. forwards. top until set in position. 06 | REVERSING EARHOOK REVERSING EARHOOK | 07

charging your headset operating your headset The headset contains a rechargeable Lithium-ion battery. Prior to using the headset for the first time, it is 1. To power on your headset, press and hold the power button for 1 second until the LED flashes Blue. strongly recommended to fully charge the battery for 2 hours. NOTE: If the LED flashes Red only, the battery will need to be charged. A low battery is also denoted by a low Connect the USB cable to your PS3™ (01) and insert the DC connector (02) into the headset (03). The LED will tone repeated every 20 seconds. illuminate red during the charging process and will be blue when fully charged. NOTE: Charging indication will be 2. To fit your headset comfortably, flex the earhook and loop it around your ear. Position the speaker in your ear delayed for a few minutes if the headset has not been used for a long time. for optimal audio performance. 3. To power off your headset, press and hold the power button for 1 second until the LED flashes Red. 01 charging time game time adjusting volume muting Normally the battery is fully recharged The fully charged battery offers up to Tap the + button to increase the volume Press the power button briefly (less within 3 hours. As soon as the battery 8 hours continuous use. It is advisable to in increments until the headset reaches than 1 second) to mute the headset; is fully charged, the LED will be Blue. always recharge after lengthy gameplay your desired volume level. repeat the process to un-mute. VOLUME INCREASE Disconnect the cable from the so the headset is fully charged for the Tap the - button to decrease the volume When in mute mode the LED will PS3™ and the EX-02s. next round. in increments until the headset reaches flash Red & Blue every 5 seconds. your desired volume level. Do not try If at any point to pair the the headset headset to disconnects the console, 01 from the PS3™ press lightly VOLUME DECREASE when the headset is on the power POWER / MUTE / RECONNECT charging. If it button to is charging, reconnect. it will not pair 02 to the PS3™. 03 08 | CHARGING OPERATION | 09

troubleshooting care & maintenance Having trouble with your EX-02s Next Gen Bluetooth® Headset? These troubleshooting steps will show you the This product has been designed with the highest concern for safety. However, any electrical device, smoothest path to resolving your issue. Be sure to perform troubleshooting before having your product serviced. if used improperly, has the potential to cause harm. To help ensure risk-free operation please pay attention to the guidelines below. The PS3™ is unable find the headset. • Make sure that your headset is in pairing mode (see page 4). storage environment • If the headset has been paired with another Bluetooth® device before, the PS3™ It is best to store the headset in a Please help to conserve the environment will have trouble finding the headset. Either remove the headset from the paired dry and dust free area. Do not store 01 inner cardboard packaging by recycling the device or turn off the Bluetooth® functionality on the paired device. in areas of extreme heat or cold, of this product. • Turn off / remove any other active wireless devices in the vicinity (eg. router, and avoid direct sunlight or heat This headset should NOT be disposed of in mouse, keyboard, DECT phones) to prevent signal interference. sources such as a heater. normal household waste. It should be disposed Never attempt to open of separately. Please take it to an electrical The headset will not activate after being charged. the headset; doing so will waste collection point. • To activate the headset, the battery needs to charge for at least 40 minutes. It is void your warranty. highly recommended to fully charge the battery for the full 3 hours before use. • The headset will only charge when the PS3™ is switched on. LITHIUM-ION BATTERIES: declaration Never attempt to replace Gioteck hereby declares that this headset is in No indication of charging is shown. the Lithium-Ion battery. The compliance with the essential requirements and • Charging indication may be delayed for a few minutes if the headset has not been battery should only be removed other provisions of Directive 1999/E/EC. To view used for a long time (more than a month) or if the battery is drained. by skilled service personnel. the full version of the Declaration of Conformity Never handle a damaged or 02 please go online to doc.gioteck.com. No sound can be heard from the headset. leaking Lithium-Ion battery. This device complies with Part 15 of the FCC • Make sure that your headset has been activated in Audio Device Settings and If you come into contact with Rules. Operation is subject to the following two that your volume is set correctly (refer to page 5). a leaking battery, please take conditions: (1) this device may not cause harmful • Make sure that the paired devices are within 30 Ft (9.15 metres) of each other. the following actions: interference, and (2) this device must accept any Contact with eyes: Do not rub, interference received, including interference • Make sure that the headset is turned on and fully charged. flush with clean water & seek that may cause undesired operation. The device • Check In-game settings. medical attention immediately. and its antenna must not be co-located or Contact with skin/clothes: operating in conjunction with any other antenna For further assistance please contact our customer support team on our website: Clean infected area with water. or transmitter. Gioteck are not responsible for www.gioteck.com Contact your doctor immediately any interference caused by unauthorized if swelling or soreness occurs. changes to this equipment. 10 | TROUBLESHOOTING CARE & MAINTENANCE | 11

FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. NOTE 2: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.


Document Created: 2010-10-21 14:12:18
Document Modified: 2010-10-21 14:12:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC