Test Report

FCC ID: SF4-G328

Test Report

Download: PDF
FCCID_1363787

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 FCC Part 15C Measurement and Test Report For ATI Electronics (ShenZhen) Co., LTD 2/F, A Tower, Tangyanshan Industrial Park Tangkeng Village, Shiyan Town Shenzhen, China FCC ID: SF4-G328 Report Concerns: Equipment Type: Original Report EX-02S Bluetooth Headset Model: G328 Report No.: STR10108033I Test Date: 2010-10-11 to 2010-10-15 Issue Date: 2010-10-20 Tested By: Seven Song / Engineer Reviewed By: Lahm Peng / EMC Manager Approved & Authorized By: Jandy so / PSQ Manager Prepared By: SEM.Test Compliance Service Co., Ltd 3/F, Jinbao Commerce Building, Xin'an Fanshen Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by SEM.Test Compliance Service Co., Ltd. REPORT NO.: STR10108033I PAGE 1 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 TABLE OF CONTENTS 1. GENERAL INFORMATION...................................................................................................................................3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)...............................................................................3 1.2 TEST STANDARDS...................................................................................................................................................3 1.3 RELATED SUBMITTAL(S)/GRANT(S) .......................................................................................................................3 1.4 TEST METHODOLOGY .............................................................................................................................................4 1.5 TEST FACILITY .......................................................................................................................................................4 1.6 EUT EXERCISE SOFTWARE ....................................................................................................................................4 1.7 ACCESSORIES EQUIPMENT LIST AND DETAILS .......................................................................................................4 1.8 EUT CABLE LIST AND DETAILS .............................................................................................................................4 2. SUMMARY OF TEST RESULTS ...........................................................................................................................5 3. §15.203 - ANTENNA REQUIREMENT..................................................................................................................6 3.1 STANDARD APPLICABLE.........................................................................................................................................6 3.2 TEST RESULT..........................................................................................................................................................6 4. NUMBER OF HOPPING CHANNELS AND CHANNEL SPACING .................................................................7 4.1 STANDARD APPLICABLE.........................................................................................................................................7 4.2 TEST EQUIPMENT LIST AND DETAILS .....................................................................................................................7 4.3 TEST PROCEDURE ...................................................................................................................................................7 4.4 ENVIRONMENTAL CONDITIONS ..............................................................................................................................7 4.5 SUMMARY OF TEST RESULTS/PLOTS ......................................................................................................................8 5. DWELL TIME OF A HOPPING CHANNEL ......................................................................................................10 5.1 STANDARD APPLICABLE.......................................................................................................................................10 5.2 TEST EQUIPMENT LIST AND DETAILS ...................................................................................................................10 5.3 TEST PROCEDURE .................................................................................................................................................10 5.4 ENVIRONMENTAL CONDITIONS ............................................................................................................................10 5.5 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................11 6. 20-DB BANDWIDTH..............................................................................................................................................13 6.1 STANDARD APPLICABLE.......................................................................................................................................13 6.2 TEST EQUIPMENT LIST AND DETAILS ...................................................................................................................13 6.3 TEST PROCEDURE .................................................................................................................................................13 6.4 ENVIRONMENTAL CONDITIONS ............................................................................................................................13 6.5 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................13 7. POWER OUTPUT...................................................................................................................................................16 7.1 STANDARD APPLICABLE.......................................................................................................................................16 7.2 TEST EQUIPMENT LIST AND DETAILS ...................................................................................................................16 7.3 TEST PROCEDURE .................................................................................................................................................16 7.4 ENVIRONMENTAL CONDITIONS ............................................................................................................................16 7.5 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................16 8. FIELD STRENGTH OF SPURIOUS EMISSIONS .............................................................................................17 8.1 MEASUREMENT UNCERTAINTY ............................................................................................................................17 8.2 STANDARD APPLICABLE.......................................................................................................................................17 8.3 TEST EQUIPMENT LIST AND DETAILS ...................................................................................................................17 8.4 TEST PROCEDURE .................................................................................................................................................18 8.5 TEST RECEIVER SETUP .........................................................................................................................................18 8.6 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................18 8.7 ENVIRONMENTAL CONDITIONS ............................................................................................................................19 8.8 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................19 9. OUT OF BAND EMISSIONS.................................................................................................................................28 9.1 STANDARD APPLICABLE.......................................................................................................................................28 9.2 TEST EQUIPMENT LIST AND DETAILS ...................................................................................................................28 9.3 TEST PROCEDURE .................................................................................................................................................28 9.4 ENVIRONMENTAL CONDITIONS ............................................................................................................................29 9.5 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................29 REPORT NO.: STR10108033I PAGE 2 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant: ATI Electronics (ShenZhen) Co., LTD Address of applicant: 2/F, A Tower, Tangyanshan Industrial Park Tangkeng Village, Shiyan Town Shenzhen, China Manufacturer: ATI Electronics (ShenZhen) Co., LTD Address of manufacturer: 2/F, A Tower, Tangyanshan Industrial Park Tangkeng Village, Shiyan Town Shenzhen, China General Description of E.U.T Items Description EUT Description: EX-02S Bluetooth Headset Trade Name: EX-02S Model Tested: G328 Rated Voltage: Battery DC 3.7V RF Output Power: -6~4dBm Frequency range: 2402-2480MHz Number of channels: 79 Channel Separation: 1MHz Type of Antenna: Integral Antenna Size: 9.2X6.2X1.6 cm Note: The test data is gathered from a production sample, provided by the manufacture. 1.2 Test Standards The following report is prepared on behalf of the ATI Electronics (ShenZhen) Co., LTD in accordance with FCC Part 15, Subpart C, and section 15.203, 15.205, 15.207, 15.209 and 15.247 of the Federal Communication Commissions rules. The objective is to determine compliance with FCC Part 15, Subpart C, and section 15.203, 15.205, 15.207, 15.209 and 15.247 of the Federal Communication Commissions rules. Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which result in lowering the emission, should be checked to ensure compliance has been maintained. 1.3 Related Submittal(s)/Grant(s) No Related Submittal(s). REPORT NO.: STR10108033I PAGE 3 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 1.4 Test Methodology All measurements contained in this report were conducted with ANSI C63.4-2003, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. The equipment under test (EUT) was configured to measure its highest possible emission level. The test modes were adapted with Low Channel, Middle Channel and High Channel, accordingly in reference to the Operating Instructions. 1.5 Test Facility • FCC – Registration No.: 994117 SEM.Test Compliance Services Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files and the Registration is 994117. • Industry Canada (IC) Registration No.: 7673A The 3m Semi-anechoic chamber of SEM.Test Compliance Services Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 7673A. 1.6 EUT Exercise Software The EUT exercise program used during the testing was designed to exercise the system components. 1.7 Accessories Equipment List and Details Description Manufacturer Model Serial Number / / / / / / / / 1.8 EUT Cable List and Details Cable Description Length (M) Shielded/Unshielded With Core/Without Core / / / / / / / / REPORT NO.: STR10108033I PAGE 4 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 2. SUMMARY OF TEST RESULTS FCC RULES DESCRIPTION OF TEST RESULT §15.203;§15.247(b)(4)(i) Antenna Requirement Compliant §15.247(a)(1)(iii) Quantity of Hopping Channel Compliant §15.247(a)(1) Channel Separation Compliant §15.247(a)(1)(iii) Time of Occupancy (Dwell time) Compliant §15.247(a) 20dB Bandwidth Compliant §15.247(b)(1) Power Output Compliant §15.209(a)(f) Radiated Emission Compliant §15.247(c) Band edge Compliant REPORT NO.: STR10108033I PAGE 5 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 3. §15.203 - ANTENNA REQUIREMENT 3.1 Standard Applicable According to FCC 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. 3.2 Test Result This product has an Integral antenna, fulfill the requirement of this section. REPORT NO.: STR10108033I PAGE 6 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 4. NUMBER OF HOPPING CHANNELS AND CHANNEL SPACING 4.1 Standard Applicable According to FCC 15.247(a)(1), frequency hopping systems operating in the 2400-2483.5 MHz band may have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB bandwidth of the hopping channel, and frequency hopping systems in the 2400-2483.5 MHz band shall use at least 15 channels. 4.2 Test Equipment List and Details Description Manufacturer Model Serial Number Cal. Date Due. Date Spectrum Analyzer Agilent E4402B US41192821 2010-08-12 2011-08-11 Attenuator ATTEN ATS100-4-20 / 2010-08-12 2011-08-11 Statement of Traceability: All calibrations have been performed per the NVLAP requirements traceable to the NIST. 4.3 Test Procedure Set the Lowest channel to the Highest Channel, observed the band of 2400MHz to 2438.5MHz, than count it out the number of channels for comparing with the FCC rules. Adjust channel spacing can be read by adjusting the Analyzer SPAN. 4.4 Environmental Conditions Temperature: 24 °C Relative Humidity: 54% ATM Pressure: 1011 mbar REPORT NO.: STR10108033I PAGE 7 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 4.5 Summary of Test Results/Plots No. of Channel=79 Channel Spacing (Low CH=1MHz) REPORT NO.: STR10108033I PAGE 8 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 Channel Spacing (Middle CH=1MHz) Channel Spacing (High CH=1MHz) REPORT NO.: STR10108033I PAGE 9 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 5. DWELL TIME OF A HOPPING CHANNEL 5.1 Standard Applicable According to 15.247(a)(1)(iii), Frequency hopping systems in the 2400–2483.5 MHz band shall use at least 15 channels. The average time of occupancy on any channel shall not be greater than 0.4 seconds within a period of 0.4 seconds multiplied by the number of hopping channels employed. 5.2 Test Equipment List and Details Description Manufacturer Model Serial Number Cal. Date Due. Date Spectrum Analyzer Agilent E4402B US41192821 2010-08-12 2011-08-11 Attenuator ATTEN ATS100-4-20 / 2010-08-12 2011-08-11 Statement of Traceability: All calibrations have been performed per the NVLAP requirements traceable to the NIST. 5.3 Test Procedure 1. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 2. Set center frequency of spectrum analyzer = operating frequency. 3. Set the spectrum analyzer as RBW=1000 KHz, VBW=3000 KHz, Span = 0Hz. 4. Repeat above procedures until all frequency measured was complete. 5.4 Environmental Conditions Temperature: 24 °C Relative Humidity: 54% ATM Pressure: 1011 mbar REPORT NO.: STR10108033I PAGE 10 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 5.5 Summary of Test Results/Plots The dwell time within a 31.6 second period in data mode is independent from the packet type (packet length). The calculation for a 31.6 second period is a follows: Dwell time = time slot length * hop rate / number of hopping channels *31.6s Test data is corrected with the worse case, which the packet length is DH1. CH Low: DH1 time slot = 0.38 (ms) * (1600/(79)) * 31.6 = 243.2 (ms) < 400 (ms) REPORT NO.: STR10108033I PAGE 11 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 CH Mid: DH1 time slot =0.38 (ms) * (1600/(79)) * 31.6 = 243.2 (ms) < 400 (ms) CH High: DH1 time slot = 0.39 (ms) * (1600/(79)) * 31.6 = 249.6 (ms) < 400 (ms) REPORT NO.: STR10108033I PAGE 12 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 6. 20-dB BANDWIDTH 6.1 Standard Applicable According to 15.247(a)(1)(iii). For frequency hopping systems operating in the 2400MHz-2483.5 MHz no limit for 20dB bandwidth. 6.2 Test Equipment List and Details Description Manufacturer Model Serial Number Cal. Date Due. Date Spectrum Analyzer Agilent E4402B US41192821 2010-08-12 2011-08-11 Attenuator ATTEN DC-4GHz ATS100-4-20 2010-08-12 2011-08-11 Statement of Traceability: All calibrations have been performed per the NVLAP requirements traceable to the NIST. 6.3 Test Procedure 1. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 2. Set center frequency of spectrum analyzer = operating frequency. 3. The spectrum analyzer as RBW=30 KHz (>1 % of Bandwidth.), Sweep=auto 4. Mark the peak frequency and –20dB (upper and lower) frequency. 6.4 Environmental Conditions Temperature: 25 °C Relative Humidity: 53% ATM Pressure: 1018 mbar 6.5 Summary of Test Results/Plots Frequency 20 dB Bandwidth Limit MHz kHz dB 2402 1107 / 2441 1107 / 2480 1077 / REPORT NO.: STR10108033I PAGE 13 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 CH Low: CH Mid: REPORT NO.: STR10108033I PAGE 14 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 CH High: REPORT NO.: STR10108033I PAGE 15 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 7. POWER OUTPUT 7.1 Standard Applicable According to 15.247(b)(1). For frequency hopping systems operating in the 2400–2483.5 MHz band employing at least 75 non-overlapping hopping channels, and all frequency hopping systems in the 5725–5850 MHz band: 1 watt. For all other frequency hopping systems in the 2400–2483.5 MHz band: 0.125 watts. 7.2 Test Equipment List and Details Description Manufacturer Model Serial Number Cal. Date Due. Date Spectrum Analyzer R&S FSP 836079/035 2010-04-16 2011-04-15 EMI Test Receiver R&S ESVB 825471/005 2010-08-12 2011-08-11 Positioning C&C CC-C-1F N/A 2010-08-12 2011-08-11 Controller RF Switch EM EMSW18 SW060023 2010-08-12 2011-08-11 Pre-amplifier Agilent 8447F 3113A06717 2010-08-12 2011-08-11 Pre-amplifier Compliance Direction PAP-0118 24002 2010-08-12 2011-08-11 Trilog Broadband SCHWARZBECK VULB9163 9163-333 2010-07-21 2011-07-20 Antenna Horn Antenna ETS 3117 00086197 2010-07-21 2011-07-20 Statement of Traceability: All calibrations have been performed per the NVLAP requirements traceable to the NIST. 7.3 Test Procedure The device under test has an integral antenna and the power was measured on a radiated basis. 7.4 Environmental Conditions Temperature: 24 °C Relative Humidity: 55% ATM Pressure: 1011 mbar 7.5 Summary of Test Results/Plots 2402 MHz 1.5038 mW EIRP 2441 MHz 1.2717 mW EIRP 2480 MHz 1.2753 mW EIRP Note: The Antenna Gain is under considering. REPORT NO.: STR10108033I PAGE 16 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 8. FIELD STRENGTH OF SPURIOUS EMISSIONS 8.1 Measurement Uncertainty Based on NIS 81, The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of a radiation emissions measurement is +5.10 dB. 8.2 Standard Applicable According to §15.247(c), 15.205 15.209(b) &15.35 (b), the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Section 15.209: 30 - 88 MHz 40 dBuV/m @3M 88 -216 MHz 43.5 dBuV/m @3M 216 -960 MHz 46 dBuV/m @3M Above 960 MHz 54dBuV/m @3M The emission limit in this paragraph is based on measurement instrumentation employing an average detector. The provisions in §15.35 for limiting peak emissions apply. EMISSIONS RADIATED OUTSIDE OF THE SPECIFIED FREQUENCY BANDS, EXCEPT FOR HARMONICS, SHALL BE ATTENUATED BY AT LEAST 20 dB BELOW THE LEVEL OF THE FUNDAMENTAL OR TO THE GENERAL RADIATED EMISSION LIMITS IN 15.209,WHICHEVER IS THE LESSER ATTENUATION. Emissions that fall in the restricted bands (15.205) must be less than 54dBuV/m otherwise the spurious and harmonics must be attenuated by at least 20dB. 8.3 Test Equipment List and Details Description Manufacturer Model Serial Number Cal. Date Due. Date Spectrum Analyzer R&S FSP 836079/035 2010-04-16 2011-04-15 EMI Test Receiver R&S ESVB 825471/005 2010-08-12 2011-08-11 Positioning C&C CC-C-1F N/A 2010-08-12 2011-08-11 Controller RF Switch EM EMSW18 SW060023 2010-08-12 2011-08-11 Pre-amplifier Agilent 8447F 3113A06717 2010-08-12 2011-08-11 Pre-amplifier Compliance Direction PAP-0118 24002 2010-08-12 2011-08-11 Trilog Broadband SCHWARZBECK VULB9163 9163-333 2010-07-21 2011-07-20 Antenna Horn Antenna ETS 3117 00086197 2010-07-21 2011-07-20 Statement of Traceability: All calibrations have been performed per the NVLAP requirements traceable to the NIST. REPORT NO.: STR10108033I PAGE 17 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 8.4 Test Procedure The setup of EUT is according with per ANSI C63.4-2003 measurement procedure. The specification used was with the FCC Part 15.205 15.247(a) and FCC Part 15.209 Limit. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. Antenna Tower 1m-4m 3m EUT 0.8m Turntable Table To EMI Receiver Ground Plane 8.5 Test Receiver Setup During the radiated emission test for above 1GHz, the test receiver was set with the following configurations: For peak detector: RBW = 1000kHz, VBW = 3000kHz, Sweep Time = Auto For average detector: RBW = 1000kHz, VBW = 10Hz, Sweep Time = Auto 8.6 Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and the Cable Factor, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Indicated Reading + Ant. Factor + Cable Loss – Ampl. Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of -6dBμV means the emission is 6dBμV below the maximum limit for Class B. The equation for margin calculation is as follows: REPORT NO.: STR10108033I PAGE 18 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 Margin = Corr. Ampl. – FCC Part 15 Limit 8.7 Environmental Conditions Temperature: 25 °C Relative Humidity: 52% ATM Pressure: 1012 mbar 8.8 Summary of Test Results/Plots According to the data below, the FCC Part 15.205, 15.209 and 15.247 standards, and had the worst margin of: -1.9 dBμV at 4960.0 MHz in the Vertical polarization for High Channel, 30 MHz to 25 GHz, 3 Meters Note: this EUT was tested in 3 orthogonal positions and the worst case position data was reported. REPORT NO.: STR10108033I PAGE 19 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 From 30 MHz to 1 GHz Test Mode: Transmitting-Low channel Test Specification: Horizontal & Vertical Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) (·) (cm) 1 30.0000 18.76 6.63 25.39 40.00 -14.61 264 100 peak 2 98.3752 13.05 7.70 20.75 43.50 -22.75 134 100 peak 3 739.2136 15.56 14.89 30.45 46.00 -15.55 270 100 peak REPORT NO.: STR10108033I PAGE 20 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 Test Mode: Transmitting-Low channel Test Specification: Horizontal & Vertical Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) (·) (cm) 1 30.0000 19.36 6.63 25.99 40.00 -14.01 167 100 peak 2 102.6117 14.08 7.58 21.66 43.50 -21.84 250 100 peak 3 655.9766 13.74 14.36 28.10 46.00 -17.90 360 100 peak REPORT NO.: STR10108033I PAGE 21 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 Test Mode: Transmitting-Middle channel Test Specification: Horizontal & Vertical Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) (·) (cm) 1 30.0000 16.81 6.63 23.44 40.00 -16.56 160 100 peak 2 104.0640 13.33 7.46 20.79 43.50 -22.71 36 100 peak 3 550.2902 14.05 13.30 27.35 46.00 -18.65 310 100 peak REPORT NO.: STR10108033I PAGE 22 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 Test Mode: Transmitting-Middle channel Test Specification: Horizontal & Vertical Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) (·) (cm) 1 30.0000 14.76 6.63 21.39 40.00 -18.61 67 100 peak 2 100.4712 13.35 7.77 21.12 43.50 -22.38 149 100 peak 3 512.9478 13.37 13.09 26.46 46.00 -19.54 250 100 peak REPORT NO.: STR10108033I PAGE 23 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 Test Mode: Transmitting-High channel Test Specification: Horizontal & Vertical Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) (·) (cm) 1 47.9940 15.23 7.81 23.04 40.00 -16.96 335 100 peak 2 99.5281 14.98 7.78 22.76 43.50 -20.74 120 100 peak 3 620.7096 16.99 14.24 31.23 46.00 -14.77 360 100 peak REPORT NO.: STR10108033I PAGE 24 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 Test Mode: Transmitting-High channel Test Specification: Horizontal & Vertical Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) (·) (cm) 1 30.0000 19.15 6.63 25.78 40.00 -14.22 227 100 peak 2 64.5319 16.63 5.39 22.02 40.00 -17.98 56 100 peak 3 899.9577 17.86 16.90 34.76 46.00 -11.24 194 200 peak REPORT NO.: STR10108033I PAGE 25 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 Above 1GHz Meter Antenna Correction Frequency Direction Polar Cable loss Amplifier Limit Margin Detector Reading Loss Amplitude MHz Degree H/V dB dB dBuV/m dB dBuV dB dBuV/m Low Channel (1G to 25GHz) 4804.0 AV 42.8 45 H 34.1 5.2 33.0 49.1 54 -4.9 4804.0 AV 45.3 359 V 34.1 5.2 33.0 51.6 54 -2.4 7206.0 AV 36.5 65 H 37.4 6.1 33.5 46.5 54 -7.5 7206.0 AV 38.4 98 V 37.4 6.1 33.5 48.4 54 -5.6 2402.0 AV 76.3 256 H 29.1 3.7 34.0 75.1 (Fund.) 2402.0 AV 78.1 30 V 29.1 3.7 34.0 76.9 (Fund.) 4804.0 PK 48.8 98 H 34.1 5.2 33.0 55.1 74 -18.9 4804.0 PK 50.3 72 V 34.1 5.2 33.0 56.6 74 -17.4 7206.0 PK 41.4 30 H 37.4 6.1 33.5 51.4 74 -22.6 7206.0 PK 40.3 185 V 37.4 6.1 33.5 50.3 74 -23.7 2402.0 PK 81.8 78 H 29.1 3.7 34.0 80.6 (Fund.) 2402.0 PK 82.9 44 V 29.1 3.7 34.0 81.7 (Fund.) Middle Channel (1G to 25GHz) 4882.0 AV 42.3 237 H 34.1 5.2 33.0 48.6 54 -5.4 4882.0 AV 44.9 354 V 34.1 5.2 33.0 51.2 54 -2.8 7323.0 AV 35.9 187 H 37.4 6.1 33.5 45.9 54 -8.1 7323.0 AV 37.3 55 V 37.4 6.1 33.5 47.3 54 -6.7 2441.0 AV 81.7 21 H 29.1 3.7 34.0 80.5 (Fund.) 2441.0 AV 83.0 34 V 29.1 3.7 34.0 81.8 (Fund.) 4882.0 PK 48.2 342 H 34.1 5.2 33.0 54.5 74 -19.5 4882.0 PK 49.4 30 V 34.1 5.2 33.0 55.7 74 -18.3 7323.0 PK 40.8 264 H 37.4 6.1 33.5 50.8 74 -23.2 7323.0 PK 45.2 164 V 37.4 6.1 33.5 51.5 74 -22.5 2441.0 PK 83.8 220 H 29.1 3.7 34.0 82.6 (Fund.) 2441.0 PK 85.0 49 V 29.1 3.7 34.0 83.8 (Fund.) REPORT NO.: STR10108033I PAGE 26 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 High Channel (1G to 25GHz) 4960.0 AV 43.3 17 H 34.1 5.2 33.0 49.6 54 -4.4 4960.0 AV 45.8 13 V 34.1 5.2 33.0 52.1 54 -1.9 7440.0 AV 37.2 355 H 37.4 6.1 33.5 47.2 54 -6.8 7440.0 AV 38.7 66 V 37.4 6.1 33.5 48.7 54 -5.3 2480.0 AV 80.8 63 H 29.1 3.7 34.0 79.6 (Fund.) 2480.0 AV 81.2 85 V 29.1 3.7 34.0 80.0 (Fund.) 4960.0 PK 49.3 50 H 34.1 5.2 33.0 55.6 74 -18.4 4960.0 PK 50.6 59 V 34.1 5.2 33.0 56.9 74 -17.1 7440.0 PK 42.7 269 H 37.4 6.1 33.5 52.7 74 -21.3 7440.0 PK 43.4 64 V 37.4 6.1 33.5 53.4 74 -20.6 2480.0 PK 83.9 85 H 29.1 3.7 34.0 82.7 (Fund.) 2480.0 PK 86.0 55 V 29.1 3.7 34.0 84.8 (Fund.) th Note: Testing is carried out with frequency rang 30MHz to the tenth harmonics, which above 5 Harmonics is close to the noise base even antenna close up to 1meter distance according the measurement of ANSI C63.4. REPORT NO.: STR10108033I PAGE 27 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 9. OUT OF BAND EMISSIONS 9.1 Standard Applicable According to §15.247 (d) In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. 9.2 Test Equipment List and Details Description Manufacturer Model Serial Number Cal. Date Due. Date Spectrum Analyzer R&S FSP 836079/035 2010-04-16 2011-04-15 EMI Test Receiver R&S ESVB 825471/005 2010-08-12 2011-08-11 Positioning C&C CC-C-1F N/A 2010-08-12 2011-08-11 Controller RF Switch EM EMSW18 SW060023 2010-08-12 2011-08-11 Pre-amplifier Agilent 8447F 3113A06717 2010-08-12 2011-08-11 Pre-amplifier Compliance Direction PAP-0118 24002 2010-08-12 2011-08-11 Trilog Broadband SCHWARZBECK VULB9163 9163-333 2010-07-21 2011-07-20 Antenna Horn Antenna ETS 3117 00086197 2010-07-21 2011-07-20 Statement of Traceability: All calibrations have been performed per the NVLAP requirements traceable to the NIST. 9.3 Test Procedure As the radiation test, set the Lowest and Highest Transmitting Channel, observed the outside band of 2400MHz to 2438.5MHz, than mark the higher-level emission for comparing with the FCC rules. The test receiver was set with the following configurations: For peak detector: RBW = 1000kHz, VBW = 3000kHz, Sweep Time = Auto For average detector: RBW = 1000kHz, VBW = 10Hz, Sweep Time = Auto REPORT NO.: STR10108033I PAGE 28 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 9.4 Environmental Conditions Temperature: 23°C Relative Humidity: 54% ATM Pressure: 1011 mbar 9.5 Summary of Test Results/Plots Frequency Limit Test mode Result MHz dBuV /dB 2310.00 <54dBuv Pass Lowest 2390.00 <54dBuv Pass 2400.00 >20dB ATT Pass 2483.50 <54dBuv Pass Highest 2500.00 <54dBuv Pass The edge emissions are below the FCC 15.209 Limits. Please refer to the test plots below. REPORT NO.: STR10108033I PAGE 29 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 Lowest Bandedge No. Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) 1 2310.000 9.18 32.30 41.48 54.00 -12.52 Average Detector 2310.000 17.83 32.30 50.13 74.00 -23.87 Peak Detector 2 2390.000 8.92 32.42 41.34 54.00 -12.66 Average Detector 2390.000 17.60 32.42 50.02 74.00 -23.98 Peak Detector 3 2400.000 18.25 32.44 50.69 / / Average Detector 4 2402.000 44.43 32.44 76.87 / / Average Detector REPORT NO.: STR10108033I PAGE 30 OF 31 FCC PART 15.247

ATI Electronics (ShenZhen) Co., LTD Model: SF4-G328 Highest Bandedge No. Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) 1 2480.000 47.31 32.57 79.88 / / Average Detector 2 2483.500 9.24 32.57 41.81 54.00 -12.19 Average Detector 2483.500 17.74 32.57 50.31 74.00 -23.69 Peak Detector 3 2500.000 8.79 32.60 41.39 54.00 -12.61 Average Detector 2500.000 17.62 32.60 50.22 74.00 -23.78 Peak Detector ***** END OF REPORT ***** REPORT NO.: STR10108033I PAGE 31 OF 31 FCC PART 15.247


Document Created: 2010-10-20 15:49:47
Document Modified: 2010-10-20 15:49:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC