List of Differences

FCC ID: SF4-G320

Cover Letter(s)

Download: PDF
FCCID_1560741

             ATl Electronics (ShenZhen) Co., LTD.
              2/F, A Tower, Tangyanshan Industrial Park Tangkeng Village, Shiyan Town, Shenzhen,
              China


             Federal Communications Commission
             Authorization and Evaluation Division
              7435 Oakland Mills Road
              Columbia, MD 21046


             Date: October 9, 2011


               SUBJECT : Class II Permissive Change for FCC ID: SF4—G320

             The product, EX—01 Bluetooth Headset, has been granted by FCC dated 08/31/2010,
             FCC ID: SF4—G320. Now we, ATI Electronics (ShenZhen) Co., LTD , would like to
            modify the authorized equipment for below hardware changes:
                Change the main IC (U1),old version type is BC6110 and new version type is
     6




                BC6130, it is the upgrade version;
                Added a LC filter circuit to replace the balance filter(T1);
   0 0 0 9 06 6 6 6 6 ¢6




                Delete the copper antenna of the top layer;
                For cost down add one LC filter circuit to replace the LDO(U3) cizcuit;
                Put the crystal part(XT1) on the top layer;
                Change the free piece tact switch type ofthe bottom layer;
                Remove the solder mask of the Spk;
                Remove the solder mask of the MIC;
                Remove the solder mask of the (R,G ,+ );
                Remove the EEPROM part(U2) ;
                Added coil inductance(L4) to replace the chip inductance and put the coil
                inductance on the bottom layer;
                Remove the transistor(Q1) part of the bottom layer;
* 0 0 0 0 0 0 06 0 6 4 6 4 4 0 06 06 6




                Covered copper antenna of the bottom layer with the green dielectric oil;
                                         Delete the capacitor C4, C6, C30, C5, C3, C10(10nF);
                                         Delete the capacitor C14(1 S5PF);
                                         Delete the capacitor C25(4.7PF);
                                         Delete the inductance L3(15nH);
                                         Delete the capacitor C31(4.7uF);
                                         Delete the resistor R4,R7(10K);
                                         Delete the resistor R16(1K);
                                         Delete the resistor R13(220K);
                                         Delete the resistor R14(150K);
                                         Change the capacitor C12 to 22Nf;
                                         Change the resistor R19 to 1K.;
                                         Change the resistor R6 to 220K;;
                                         Change the resistor R5 to 47K.;
                                         Added the capacitor C2(10pF);
                                         Added the capacitor €20,C32(47nF);
                                         Added the capacitor C33(2.2uF);


ATl Electronics (ShenZhen) Co., LTD.
2/F, A Tower, Tangyanshan Industrial Park Tangkeng Village, Shiyan Town, Shenzhen,
China
4 Added the resistor R12(2R2);
© Added the   resistor R18(470);
© Added the   capacitor C35(22nF);
h Added the   capacitor C36(100nF);
h Added the   inductance L5(15nH);




Sincerely,


ATI Electronics    (ShenZhen)   Co.,   LTD.




_/_
David Xu
President



Document Created: 2019-06-11 06:35:24
Document Modified: 2019-06-11 06:35:24

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC