Report MPE

FCC ID: SBVRM015

RF Exposure Info

Download: PDF
FCCID_4050797

CERTIFICATION TEST REPORT Report Number. : 12049380-E5V2 Applicant : SONOS INC. 614 CHAPALA STREET SANTA BARBARA, CA 93101, U.S.A Model : S16 FCC ID : SBVRM015 IC : 5373A-RM015 EUT Description : 4X4 802.11a/b/g/n HT20 CLIENT & MASTER DEVICE Test Standard(s) : FCC Part 1 Subpart I FCC Part 2 Subpart J INDUSTRY CANADA RSS 102 ISSUE 5 Date Of Issue: October 16, 2018 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 NVLAP Lab code: 200065-0

REPORT NO: 12049380-E5V2 DATE: 10/16/2018 FCC ID: SBVRM015 IC: 5373A-RM015 Revision History Issue Rev. Date Revisions Revised By V1 10/5/2018 Initial Issue - V2 10/16/2018 Updated Section 6 K.Kedida Page 2 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12049380-E5V2 DATE: 10/16/2018 FCC ID: SBVRM015 IC: 5373A-RM015 TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. REFERENCES ................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ................................................................................. 5 5. MAXIMUM PERMISSIBLE RF EXPOSURE ....................................................................... 6 5.1. FCC RULES ................................................................................................................ 6 5.2. IC RULES .................................................................................................................... 7 5.3. EQUATIONS................................................................................................................ 8 5.4. LIMITS AND IC EXEMPTION .....................................................................................10 6. RF EXPOSURE RESULTS ................................................................................................11 Page 3 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12049380-E5V2 DATE: 10/16/2018 FCC ID: SBVRM015 IC: 5373A-RM015 1. ATTESTATION OF TEST RESULTS COMPANY NAME: SONOS INC. 614 CHAPALA STREET SANTA BARBARA, CA 93101, U.S.A.  EUT DESCRIPTION: 4X4 802.11a/b/g/n HT20 CLIENT & MASTER DEVICE MODEL: S16 SERIAL NUMBER: 1807-34-7E-5C-00-10-20-4 (Radiated Sample) 1807-34-7E-5C-00-0F-D5-E (Conducted Sample) APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Pass INDUSTRY CANADA RSS 102 ISSUE 5 Pass UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of the U.S. government. Approved & Released For UL Verification Services Inc. By: Calculated By: DAN CORONIA Kiya Kedida CONSUMER TECHNOLOGY DIVISION CONSUMER TECHNOLOGY DIVISION OPERATIONS LEADER PROJECT ENGINEER UL Verification Services Inc. UL Verification Services Inc Page 4 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12049380-E5V2 DATE: 10/16/2018 FCC ID: SBVRM015 IC: 5373A-RM015 2. TEST METHODOLOGY All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01 and IC Safety Code 6. 3. REFERENCES All measurements were made as documented in test reports UL Verification Services. Documents 12049380-E1 & 12049380-E2 for operation in the 2.4 GHz band. Document 12049380-E3 for operation in the 5 GHz band. Output power ,Duty cycle and Antenna gain data is excerpted from the applicable test reports. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 Benicia Street, Fremont, California, USA. UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. Page 5 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12049380-E5V2 DATE: 10/16/2018 FCC ID: SBVRM015 IC: 5373A-RM015 5. MAXIMUM PERMISSIBLE RF EXPOSURE 5.1. FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. TABLE 1—LIMITS FOR M AXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency range Electric field strength Magnetic field strength Power density Averaging time (MHz) (V/m) (A/m) (mW/cm2) (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Notes: (1) Occupational/controlled exposure limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when a person is transient through a location where occupational/controlled limits apply provided he or she is made aware of the potential for exposure. (2) General population/uncontrolled exposure limits apply in situations in which the general public may be exposed, or in which persons who are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure Page 6 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12049380-E5V2 DATE: 10/16/2018 FCC ID: SBVRM015 IC: 5373A-RM015 5.2. IC RULES For the purpose of this standard, Industry Canada has adopted the SAR and RF field strength limits established in Health Canada’s RF exposure guideline, Safety Code 6. Page 7 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12049380-E5V2 DATE: 10/16/2018 FCC ID: SBVRM015 IC: 5373A-RM015 5.3. EQUATIONS POWER DENSITY Power density is given by: S = EIRP / (4 * Pi * D^2) Where S = Power density in mW/cm^2 EIRP = Equivalent Isotropic Radiated Power in mW D = Separation distance in cm Power density in units of mW/cm^2 is converted to units of W/m^2 by multiplying by 10. DISTANCE Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) Where D = Separation distance in cm EIRP = Equivalent Isotropic Radiated Power in mW S = Power density in mW/cm^2 SOURCE-BASED DUTY CYCLE Where applicable (for example, multi-slot cell phone applications) a duty cycle factor may be applied. Source-based time-averaged EIRP = (DC / 100) * EIRP Where DC = Duty Cycle in %, as applicable EIRP = Equivalent Isotropic Radiated Power in W Page 8 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12049380-E5V2 DATE: 10/16/2018 FCC ID: SBVRM015 IC: 5373A-RM015 MIMO AND COLOCATED TRANSMITTERS (IDENTICAL LIMIT FOR ALL TRANSMITTERS) For multiple chain devices, and colocated transmitters operating simultaneously in frequency bands where the limit is identical, the total power density is calculated using the total EIRP obtained by summing the EIRP (in linear units) of each transmitter. Total EIRP = (EIRP1) + (EIRP2) + ... + (EIRPn) where EIRPx = Source-based time-averaged EIRP of chain x or transmitter x The total EIRP is then used to calculate the Power Density or the Distance as applicable. MIMO AND COLOCATED TRANSMITTERS For multiple colocated transmitters operating simultaneously in frequency bands where different limits apply: The Power Density at the specified separation distance is calculated for each transmitter chain or transmitter. The fraction of the exposure limit is calculated for each chain or transmitter as (Power Density of chain or transmitter) / (Limit applicable to that chain or transmitter). The fractions are summed. Compliance is established if the sum of the fractions is less than or equal to one. Page 9 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12049380-E5V2 DATE: 10/16/2018 FCC ID: SBVRM015 IC: 5373A-RM015 5.4. LIMITS AND IC EXEMPTION VARIABLE LIMITS For mobile radio equipment operating in the cellular phone band, the lowest power density limit is calculated using the lowest frequency: 824 MHz / 1500 = 0.55 mW/cm^2 (FCC) S = 0.02619 ƒ 0.6834 W/m^2 (IC). FIXED LIMITS For operation in the PCS band, the 2.4 GHz band and the 5 GHz bands: From FCC §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2 From IC Safety Code 6, Section 4 Table 4 Column 4, S = 0.02619 ƒ 0.6834 W/m^2 INDUSTRY CANADA EXEMPTION RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows: • below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1 W (adjusted for tune-up tolerance); • at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 4.49/ƒ0.5 W (adjusted for tune-up tolerance), where ƒ is in MHz; • at or above 48 MHz and below 300 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 0.6 W (adjusted for tune-up tolerance); • at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10-2 ƒ0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz; • at or above 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 5 W (adjusted for tune-up tolerance). In these cases, the information contained in the RF exposure technical brief may be limited to information that demonstrates how the e.i.r.p. was derived. Page 10 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12049380-E5V2 DATE: 10/16/2018 FCC ID: SBVRM015 IC: 5373A-RM015 6. RF EXPOSURE RESULTS In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. (MIMO and/or Colocated transmitters all with same Power Density limit, 20 cm MPE distance) Multiple chain or colocated transmitters Band Mode Chain Separation Output Antenna Duty EIRP FCC Power IC for Distance AVG Gain Cycle Density Power Density Power MIMO (cm) (dBm) (dBi) (%) (mW) (mW/cm^2) (W/m^2) 2.4 GHz BLE N/A 20.0 -2.00 3.50 61.27 0.9 1.0 10.00 2.4 GHz WLAN 0 20.0 20.50 3.47 98.77 246.4 1.0 10.00 2.4 GHz WLAN 1 20.0 20.50 3.56 98.77 251.6 1.0 10.00 2.4 GHz WLAN 2 20.0 20.50 2.22 98.77 184.8 1.0 10.00 2.4 GHz WLAN 3 20.0 20.50 2.11 98.77 180.1 1.0 10.00 5 GHz WLAN 0 20.0 19.00 3.70 89.83 167.3 1.0 10.00 5 GHz WLAN 1 20.0 19.00 3.85 89.83 173.1 1.0 10.00 5 GHz WLAN 2 20.0 19.00 4.19 89.83 187.2 1.0 10.00 5 GHz WLAN 3 20.0 19.00 4.62 89.83 206.7 1.0 10.00 Combined Result 20 1598.1 0.318 3.18 Remarks: 2.4GHz 802.11b and 5.8GHz 802.11nHT20 mode is the worst mode. Other operation modes are being covered by presented Output Average Power data. Notes: 1) The manufacturer configures output power so that the maximum power, after accounting for manufacturing tolerances, will never exceed the maximum power level measured. 2) The output power in the tables above is the maximum power per chain among various channels and various modes within the specific band. 3) The antenna gain in the tables above is the maximum antenna gain among various channels within the specified band. END OF REPORT Page 11 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


Document Created: 2019-03-21 22:49:18
Document Modified: 2019-03-21 22:49:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC