11361969-E9V2 FCCIC Report MPE

FCC ID: SBVRM011

RF Exposure Info

Download: PDF
FCCID_3245656

FCC Part 1 Subpart I FCC Part 2 Subpart J INDUSTRY CANADA RSS 102 ISSUE 5 RF EXPOSURE REPORT FOR WIRELESS SMART SPEAKER MODEL NUMBER: S11 FCC ID: SBVRM011 IC: 5373A-RM011 REPORT NUMBER: 11361969-E9V2 ISSUE DATE: DECEMBER 6, 2016 Prepared for SONOS INC. 614 CHAPALA STREET SANTA BARBARA, CA 93101, U.S.A Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888

REPORT NO: 11361969-E9V2 DATE: 12/06/16 FCC ID: SBVRM011 IC: 5373A-RM011 Revision History Issue Rev. Date Revisions Revised By V1 9/30/16 Initial Issue D. CORONIA V2 12/06/16 Corrected project number D. CORONIA Page 2 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 11361969-E9V2 DATE: 12/06/16 FCC ID: SBVRM011 IC: 5373A-RM011 TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 4 2. TEST METHODOLOGY ........................................................................................................ 5 3. REFERENCES ...................................................................................................................... 5 4. FACILITIES AND ACCREDITATION .................................................................................... 5 5. MAXIMUM PERMISSIBLE RF EXPOSURE ......................................................................... 6 5.1. FCC RULES ................................................................................................................... 6 5.2. IC RULES ....................................................................................................................... 7 5.3. EQUATIONS .................................................................................................................. 8 5.4. LIMITS AND IC EXEMPTION ....................................................................................... 10 6. RF EXPOSURE RESULTS ................................................................................................. 11 Page 3 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 11361969-E9V2 DATE: 12/06/16 FCC ID: SBVRM011 IC: 5373A-RM011 1. ATTESTATION OF TEST RESULTS COMPANY NAME: SONOS, INC. PRODUCT DESCRIPTION: WIRELESS SMART SPEAKER MODEL: S11 SERIAL NUMBER: B8-E9-37-40-13-24-4 (Conducted), B8-E9-37-40-13-1E-F (Radiated) APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Pass INDUSTRY CANADA RSS 102 ISSUE 5 Pass UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance with the requirements set forth in the above standards, using test results reported in the test report documents referenced below and/or documentation furnished by the applicant. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations of these calculations. The results show that the equipment is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By: Calculated By: DAN CORONIA KIYA KEDIDA WiSE PROJECT LEAD WiSE LAB ENGINEER UL Verification Services Inc. UL Verification Services Inc. Page 4 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 11361969-E9V2 DATE: 12/06/16 FCC ID: SBVRM011 IC: 5373A-RM011 2. TEST METHODOLOGY All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01 and IC Safety Code 6. 3. REFERENCES All measurements were made as documented in test report UL Verification Services Inc. Document 11361969-E1V2 for operation in the 2.4 GHz band, and UL Verification Services Inc. Documents 11361969-E2V2 for operation in the 5 GHz band. Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 Benicia Street, Fremont, California, USA. UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0 Page 5 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 11361969-E9V2 DATE: 12/06/16 FCC ID: SBVRM011 IC: 5373A-RM011 5. MAXIMUM PERMISSIBLE RF EXPOSURE 5.1. FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. Page 6 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 11361969-E9V2 DATE: 12/06/16 FCC ID: SBVRM011 IC: 5373A-RM011 5.2. IC RULES For the purpose of this standard, Industry Canada has adopted the SAR and RF field strength limits established in Health Canada’s RF exposure guideline, Safety Code 6. Page 7 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 11361969-E9V2 DATE: 12/06/16 FCC ID: SBVRM011 IC: 5373A-RM011 5.3. EQUATIONS POWER DENSITY Power density is given by: S = EIRP / (4 * Pi * D^2) Where S = Power density in mW/cm^2 EIRP = Equivalent Isotropic Radiated Power in mW D = Separation distance in cm Power density in units of mW/cm^2 is converted to units of W/m^2 by multiplying by 10. DISTANCE Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) Where D = Separation distance in cm EIRP = Equivalent Isotropic Radiated Power in mW S = Power density in mW/cm^2 SOURCE-BASED DUTY CYCLE Where applicable (for example, multi-slot cell phone applications) a duty cycle factor may be applied. Source-based time-averaged EIRP = (DC / 100) * EIRP Where DC = Duty Cycle in %, as applicable EIRP = Equivalent Isotropic Radiated Power in W Page 8 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 11361969-E9V2 DATE: 12/06/16 FCC ID: SBVRM011 IC: 5373A-RM011 MIMO AND COLOCATED TRANSMITTERS (IDENTICAL LIMIT FOR ALL TRANSMITTERS) For multiple chain devices, and colocated transmitters operating simultaneously in frequency bands where the limit is identical, the total power density is calculated using the total EIRP obtained by summing the EIRP (in linear units) of each transmitter. Total EIRP = (EIRP1) + (EIRP2) + ... + (EIRPn) where EIRPx = Source-based time-averaged EIRP of chain x or transmitter x The total EIRP is then used to calculate the Power Density or the Distance as applicable. MIMO AND COLOCATED TRANSMITTERS For multiple colocated transmitters operating simultaneously in frequency bands where different limits apply: The Power Density at the specified separation distance is calculated for each transmitter chain or transmitter. The fraction of the exposure limit is calculated for each chain or transmitter as (Power Density of chain or transmitter) / (Limit applicable to that chain or transmitter). The fractions are summed. Compliance is established if the sum of the fractions is less than or equal to one. Page 9 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 11361969-E9V2 DATE: 12/06/16 FCC ID: SBVRM011 IC: 5373A-RM011 5.4. LIMITS AND IC EXEMPTION VARIABLE LIMITS For mobile radio equipment operating in the cellular phone band, the lowest power density limit is calculated using the lowest frequency: 824 MHz / 1500 = 0.55 mW/cm^2 (FCC) S = 0.02619 ƒ 0.6834 W/m^2 (IC). FIXED LIMITS For operation in the PCS band, the 2.4 GHz band and the 5 GHz bands: From FCC §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2 From IC Safety Code 6, Section 4 Table 4 Column 4, S = 0.02619 ƒ 0.6834 W/m^2 INDUSTRY CANADA EXEMPTION RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows: • below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1 W (adjusted for tune-up tolerance); • at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 4.49/ƒ0.5 W (adjusted for tune-up tolerance), where ƒ is in MHz; • at or above 48 MHz and below 300 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 0.6 W (adjusted for tune-up tolerance); • at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10-2 ƒ0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz; • at or above 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 5 W (adjusted for tune-up tolerance). In these cases, the information contained in the RF exposure technical brief may be limited to information that demonstrates how the e.i.r.p. was derived. Page 10 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 11361969-E9V2 DATE: 12/06/16 FCC ID: SBVRM011 IC: 5373A-RM011 6. RF EXPOSURE RESULTS In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. (MIMO and/or Colocated transmitters all with same Power Density limit, 20 cm MPE distance) Multiple chain or colocated transmitters Band Mode Chain Separation Output Antenna Duty EIRP FCC Power IC for Distance AVG Gain Cycle Density P Density Power MIMO (cm) (dBm) (dBi) (%) (mW) (mW/cm^2) (W/m^2) 2.4 GHz WLAN 0 25.10 2.60 97.4 573.7 2.4 GHz WLAN 1 24.91 2.90 97.4 588.4 2.4 GHz WLAN 2 24.89 5.30 97.4 1017.8 5 GHz WLAN 0 20.50 4.60 97.7 316.1 5 GHz WLAN 1 19.80 6.20 97.7 388.8 Combined 20 2884.7 0.574 5.74 Remarks: 2.4GHz 802.11g is the worst mode, and 5GHz (5.8GHz) 802.11nHT20 is the worst mode. Other operation modes are being covered by presented data (see table above). (MIMO and/or Colocated transmitters all with same Power Density limit, MPE distance > 20 cm) Multiple chain or colocated transmitters Band Mode Chain FCC IC Output Antenna Duty EIRP Separation for Limit AVGLimit Gain Cycle Distance Power MIMO (mW/cm^2) (W/m^2) (dBm) (dBi) (%) (mW) (cm) 2.4 GHz WLAN 0 25.10 2.60 97.4 573.7 2.4 GHz WLAN 1 24.91 2.90 97.4 588.4 2.4 GHz WLAN 2 24.89 5.30 97.4 1017.8 5 GHz WLAN 0 20.50 4.60 97.7 316.1 5 GHz WLAN 1 19.80 6.20 97.7 388.8 Combined 1.00 10.0 2884.7 15.15 Notes: 1) The manufacturer configures output power so that the maximum power, after accounting for manufacturing tolerances, will never exceed the maximum power level measured. 2) The output power in the tables above is the maximum power per chain among various channels and various modes within the specific band. 3) The antenna gain in the tables above is the maximum antenna gain among various channels within the specified band. END OF REPORT Page 11 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


Document Created: 2017-12-20 07:41:36
Document Modified: 2017-12-20 07:41:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC