Test Report

FCC ID: SAJSKB13EAP

Test Report

Download: PDF

FCCID_456733

Toshiba Lighting & Technology Corporation FCC ID: SAJSKB13EAP

TABLE OF CONTENTS
1 - GENERAL INFORMATION................................................................................................................................................. 3
1.1 P RODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................................3
1.2 OBJECTIVE ................................................................................................................................................................................3
1.3 RELATED SUBMITTAL(S)/GRANT (S) .....................................................................................................................................3
1.4 TEST METHODOLOGY..............................................................................................................................................................3
1.5 TEST FACILITY .........................................................................................................................................................................3
2 - SYSTEM TEST CONFIGURATION.................................................................................................................................. 4
2.1 JUSTIFICATION..........................................................................................................................................................................4
2.2 EUT EXERCISE PROGRAM......................................................................................................................................................4
2.3 S CHEMATICS/BLOCK DIAGRAM.............................................................................................................................................4
2.4 EQUIPMENT M ODIFICATIONS.................................................................................................................................................4
2.5 LOCAL SUPPORT EQUIPMENT.................................................................................................................................................4
2.6 INTERFACE PORTS AND CABLING..........................................................................................................................................4
2.7 CONFIGURATION OF TEST SYSTEM .......................................................................................................................................5
2.8 TEST SETUP BLOCK DIAGRAM...............................................................................................................................................5
3 - CONDUCTED EMISSIO NS TEST DATA........................................................................................................................ 6
3.1 M EASUREMENT UNCERTAINTY .............................................................................................................................................6
3.2 EUT SETUP ...............................................................................................................................................................................6
3.3 EMI RECEIVER SETUP ............................................................................................................................................................6
3.4 EQUIPMENT LIST AND DETAILS.............................................................................................................................................6
3.5 TEST PROCEDURE ....................................................................................................................................................................6
3.6 SUMMARY OF TEST RESULTS.................................................................................................................................................7
3.7 CONDUCTED EMISSIONS TEST DATA....................................................................................................................................7

Report #R0406153 Page 2 of 9 FCC Part 18 ID Test Report

Toshiba Lighting & Technology Corporation FCC ID: SAJSKB13EAP

1 - GENERAL INFORMATION
1.1 Product Description for Equipment Under Test (EUT)
The Toshiba Lighting & Technology Corporation’s product, Model: SKB 13EAP or the "EUT" as referred
to in this report is a Self-ballasted lamp, which measures 4”L x 2.5”W x 2.5”H.

*The test data gathered are from production sample, serial number:TL06153, provided by the
manufacturer.

1.2 Objective
This Following test report is prepared on behalf of Toshiba Lighting & Technology Corporation in
accordance with Part 2, Subpart J, and Part 18, Subparts A and B of the Federal Communication
Commissions rules.

The objective is to determine compliance with FCC Part 18 limit requirements for Industrial, Scientific,
and Medical Equipment.

1.3 Related Submittal(s)/Grant(s)
No Related Submittals.

1.4 Test Methodology
All measurements contained in this report were conducted in accordance with MP-5, FCC Methods of
Measurements of Radio Noise Emissions from Industrial, Scientific, and Medical Equipment. All radiated
and conducted emission measurements were performed at Bay Area Compliance Laboratory Corp.
(BACL).

1.5 Test Facility

The Open Area Test site used by BACL to collect radiated and conducted emission measurement data is
located in the back parking lot of the building at 230 Commercial Street, Sunnyvale, California, USA.

Test site at BACL has been fully described in reports submitted to the Federal Communication
Commission (FCC) and Voluntary Control Council for Interference (VCCI). The details of these reports
has been found to be in compliance with the requirements of Section 2.948 of the FCC Rules and Article 8
of the VCCI regulations. The facility also complies with the test methods and procedures set forth ANSI
C63.4-2001.

The Federal Communications Commission and Voluntary Control Council for Interference has the reports
on file and is listed under FCC file 31040/SIT 1300F2 and VCCI Registration No.: C-1298 and R-1234.
The test site has been approved by the FCC and VCCI for public use and is listed in the FCC Public
Access Link (PAL) database.

Additionally, BACL is a National Institute of Standards and Technology (NIST) accredited laboratory,
under the National Voluntary Laboratory Accredited Program (Lab Code 200167-0).

Report #R0406153 Page 3 of 9 FCC Part 18 ID Test Report

Toshiba Lighting & Technology Corporation FCC ID: SAJSKB13EAP

2 - SYSTEM TEST CONFIGURATION
2.1 Justification
The EUT is configured for testing according to MP-5.

2.2 EUT Exercise Program
The sequence used is as follows:
The EUT was switched on after being connected to the mains power supply.

2.3 Schematics/Block Diagram
The EUT’s block diagram is presented in Appendix D.

2.4 Equipment Modifications
The EUT samples provided were reported by the manufacturer to be unmodified production samples.

2.5 Local Support Equipment

Manufacturer Description Model Serial Number FCC ID
QUEEN PUO Power Cord Cable E89949 E183417 None

2.6 Interface Ports and Cabling

Cable Description Length (M) From/Port To
None-Shielded Power Cord Cable 1.6 AC Output WALL Light /EUT

Report #R0406153 Page 4 of 9 FCC Part 18 ID Test Report

Toshiba Lighting & Technology Corporation FCC ID: SAJSKB13EAP

2.7 Configuration of Test System

2.8 Test Setup Block Diagram

LISN1
Power cables were draped along the test table and
1
bundled up to 0.8m

LISN2

EUT
1.0Meter

Non-Conducting Table
80cm above Ground Plane

1.5 Meter

Report #R0406153 Page 5 of 9 FCC Part 18 ID Test Report

Toshiba Lighting & Technology Corporation FCC ID: SAJSKB13EAP

3.6 Summary of Test Results
According to the data in section 3.7, the EUT, was found to be in compliance with the FCC 18 Conducted
margin for industry, scientific and medical devices, and with the worst margin reading of:

-20.9 dB at 0.54 MHz at the Neutral mode, 0.45-30MHz
Environmental Conditions

Temperature: 30°C
Relative Humidity: 64%
ATM Pressure: 1019mbar

3.7 Conducted Emissions Test Data
3.7.1 Conducted Test, 0.45-30MHz.

LINE CONDUCTED EMISSIONS FCC PART 18
Frequency Amplitude Detector Phase Limit Margin
MHz dBµV Qp/Ave/Peak Line/Neutral dBµV dB
0.54 35.1 Peak Neutral 48 -20.9
0.46 31.6 Peak Line 48 -25.1
0.72 30.8 Peak Neutral 48 -25.2
0.79 30.1 Peak Neutral 48 -25.9
0.60 29.5 Peak Line 48 -26.5
0.84 28.8 Peak Line 48 -27.2

3.7.2 Plot of Conducted Emissions Test Data

The plot(s) of conducted emission test is presented in the following page as reference.

Report #R0406153 Page 7 of 9 FCC Part 18 ID Test Report

Document Created: 2019-09-14 22:53:05
Document Modified: 2019-09-14 22:53:05

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC