Block diagram

FCC ID: S9NSTEBCN2V1

Block Diagram

Download: PDF
FCCID_4135064

STEVAL-BCN002V1B Block diagram What is STEVAL-BCN002V1B? It is an evaluation kit based on two boards: 1. STEVAL-BCN002V1: the sensor 2. STEVAL-BCN002V1D: the mother board used for sensor programming STEVAL-BCN002V1 Block Diagram Notes:  The STEVAL-BCN002V1 can be used standalone or plugged on top of the STEVAL-BCN002V1D  In case of standalone mode, the STEVAL-BCN002V1 is power by a CR2032 coin battery  In case of plugged mode, the STEVAL-BCN002V1 is power by the STEVAL-BCN002V1D  Plugged mode is typically used just for programming the firmware or for firmware development and debugging.

STEVAL-BCN002V1D Block Diagram Notes: - The MCU acts as bridge between the USB and the UART of the STEVAL-BCN002v1 - ST-Link V3 stamp is optional



Document Created: 2018-09-24 11:29:24
Document Modified: 2018-09-24 11:29:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC