Modular Approval Letter

FCC ID: S7APARANIESD110

Attestation Statements

Download: PDF
FCCID_693212

Sena Technologies, Inc. 210 Yangjae-dong Seocho-gu Seoul 137-130 Korea Tel. +82-2-571-8283 Fax +82-2-573-7710 FCC ID : S7APARANIESD110 Request for transmitter Module approval Transmitter Module Characteristics No Requirements EUT 1 Have its own RF shielding Device is equipped with metal shielding to cover RF section. Refer to external photos. Have buffered modulation/data inputs 2 All inputs to the modules are buffered thought logic or microprocessor inputs. (if such inputs are provided) 3 Have it own power supply regulation Internal 1.8V power regulation. 4 Meet the antenna requirements of Section 15.203 Device is equipped with unique antenna connector. Refer to external photos. Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data Device was tested on a supplied development platform for modular approval. 5 input/output lines must be connected to the module but, the module must not be inside Refer to setup photos. another case during testing Be labeled with its own FCC ID number, and if the FCC ID is not visible when the module Label is to be placed in front of the EUT(ESD110), and other label is to be placed in the 6 is installed inside another device, then the outside of the device into which the module is User’s Guide. Refer to FCC ID label format. installed must also display a label referring to the enclosed module The modular transmitter is manufactured so that the user cannot influence the operation of 7 Refer to “User’s Guide” the transmitter that will operate outside of the scope of the regulations. Address compliance with the Commission’s RF exposure limits in Sections 1.1310 and 8 2.1091. In addition, spread spectrum transmitters operating under Section 15.247 are MPE was calculated. required to address RF exposure compliance in accordance with Section 15.247(b)(4).


Document Created: 2006-08-09 15:17:47
Document Modified: 2006-08-09 15:17:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC