MODULAR APPROVAL COVER LETTER

FCC ID: S7AIW02

Cover Letter(s)

Download: PDF
FCCID_1640953

Sena Technologies, Inc. 210 Yangjae-dong Seocho-guSeoul 137-130 Korea Tel. +82-2-571-8283 Fax +82-2-573-7710 FCC ID: S7AIW02 Request for transmitter Modular approval Transmitter Module Characteristics No Requirements EUT 1 Have its own RF shielding Device is equipped with metal shielding to cover RF section. Refer to external photos. Have buffered modulation/data inputs All inputs to the modules are buffered thought logic or microprocessor inputs. 2 (if such inputs are provided) 3 Have it own power supply regulation Internal 1.8V power regulation. Refer to Module Block diagram Meet the antenna requirements of Section 15.203 BCD110DU, BCD110SU is equipped with unique antenna connector (U.FL) BCD110DS is equipped with unique antenna connector (RPSMA). 4 BCD110DC, BCC110SC is equipped with SMD antenna (Chip). Refer to external photos. Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data Device was tested on a supplied development platform for Single modular approval. 5 input/output lines must be connected to the module but, the module must not be inside Refer to setup photos. another case during testing Be labeled with its own FCC ID number, and if the FCC ID is not visible when the module Label is to be placed in front of the EUT (Parani-BCD110DU), and other label is to be 6 is installed inside another device, then the outside of the device into which the module is placed in the User’s Guide. installed must also display a label referring to the enclosed module Refer to FCC ID label format. The modular transmitter is manufactured so that the user cannot influence the operation of Refer to “User’s Guide” 7 the transmitter that will operate outside of the scope of the regulations. Address compliance with the Commission’s RF exposure limits in Sections 1.1310 and This device is categorically excluded from routine environmental because it operate at 8 2.1091. In addition, spread spectrum transmitters operating under Section 15.247 are very low power level required to address RF exposure compliance in accordance with Section 15.247(b)(4).


Document Created: 2012-02-15 14:58:11
Document Modified: 2012-02-15 14:58:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC