Test Report (Radiated)

FCC ID: S4RBMU650

Test Report

Download: PDF
FCCID_3145400

FCC PART 22H, 24E, 27 ISED RSS-131, ISSUE 2, JULY 2003 TEST AND MEASUREMENT REPORT For Mobile Communications Inc. 230 Earl Steward Drive, Aurora, Ontario, Canada, L4G6V8 FCC ID: S4RBMU650 IC: 3585A-BMC653 Report Type: Product Type: Original Report Consumer Wide-Band Booster Frank Wang Prepared By: Test Engineer Report Number: R1607216-222427 Rev A Report Date: 2016-09-06 Bo Li Reviewed By: RF Lead Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94089, USA Tel: 1 (408) 732-9162 Fax: 1 (408) 732 9164 Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*” (Rev.3)

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 TABLE OF CONTENTS 1 GENERAL INFORMATION ............................................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................... 5 1.2 MECHANICAL DESCRIPTION .............................................................................................................................. 5 1.3 OBJECTIVE ......................................................................................................................................................... 5 1.4 RELATED SUBMITTAL(S)/GRANT(S)................................................................................................................... 5 1.5 TEST METHODOLOGY ........................................................................................................................................ 5 1.6 MEASUREMENT UNCERTAINTY.......................................................................................................................... 6 1.7 TEST FACILITY................................................................................................................................................... 6 2 SYSTEM TEST CONFIGURATION .................................................................................................................. 9 2.1 JUSTIFICATION ................................................................................................................................................... 9 2.2 EUT EXERCISE SOFTWARE ................................................................................................................................ 9 2.3 EQUIPMENT MODIFICATIONS ............................................................................................................................. 9 2.4 EUT INTERNAL CONFIGURATION ...................................................................................................................... 9 2.5 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS .............................................................................................. 9 2.6 POWER SUPPLY AND LINE FILTERS .................................................................................................................... 9 2.7 INTERFACE PORTS AND CABLING ...................................................................................................................... 9 3 SUMMARY OF TEST RESULTS ...................................................................................................................... 10 4 FCC §2.1053, §22.917, §24.238, §27.53 & ISED RSS-131 §6.4 - SPURIOUS RADIATED EMISSIONS .... 11 4.1 APPLICABLE STANDARDS ................................................................................................................................ 11 4.2 TEST PROCEDURE ............................................................................................................................................ 12 4.3 TEST EQUIPMENT LIST AND DETAILS .............................................................................................................. 13 4.4 TEST SETUP BLOCK DIAGRAM ......................................................................................................................... 14 4.5 TEST ENVIRONMENTAL CONDITIONS ............................................................................................................... 14 4.6 TEST RESULTS ................................................................................................................................................. 15 5 FCC §2.1091 & ISED RSS-102 - RF EXPOSURE ............................................................................................ 19 5.1 APPLICABLE STANDARD .................................................................................................................................. 19 5.2 MPE PREDICTION ............................................................................................................................................ 19 5.3 MPE RESULTS ................................................................................................................................................. 19 5.4 ISED EXEMPTION OF RF EXPOSURE EVALUATION .......................................................................................... 21 6 EXHIBIT A – FCC AND ISED LABELING REQUIREMENTS ................................................................... 22 6.1 FCC ID LABEL REQUIREMENTS....................................................................................................................... 22 6.2 ISED RSP-100 LABELLING REQUIREMENTS ................................................................................................... 23 6.3 FCC & ISED LABEL CONTENTS AND LOCATION ............................................................................................. 24 7 EXHIBIT B - EUT SETUP PHOTOGRAPHS .................................................................................................. 27 7.1 RADIATED EMISSION BELOW 1 GHZ FRONT VIEW ........................................................................................... 27 7.2 RADIATED EMISSION BELOW 1 GHZ REAR VIEW............................................................................................. 27 7.3 RADIATED EMISSION ABOVE 1 GHZ FRONT VIEW ........................................................................................... 28 7.4 RADIATED EMISSION ABOVE 1 GHZ REAR VIEW ............................................................................................. 28 8 EXHIBIT C - EUT PHOTOGRAPHS ............................................................................................................... 29 8.1 EUT – TOP VIEW ............................................................................................................................................. 29 8.2 EUT – BOTTOM VIEW ..................................................................................................................................... 29 8.3 EUT – FRONT VIEW......................................................................................................................................... 30 8.4 EUT – REAR VIEW .......................................................................................................................................... 30 8.5 EUT – RIGHT SIDE VIEW ................................................................................................................................. 31 8.6 EUT – LEFT SIDE VIEW ................................................................................................................................... 31 Report Number: R1607216-222427 Rev A Page 2 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 8.7 EUT – PCB TOP VIEW ..................................................................................................................................... 32 8.8 EUT – PCB BOTTOM VIEW ............................................................................................................................. 32 8.9 SUPPORT EQUIPMENT – AC ADAPTER ............................................................................................................. 33 9 APPENDIX I – DECLARATION(S) OF SIMILARITY .................................................................................. 34 Report Number: R1607216-222427 Rev A Page 3 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 0 R1607216-222427 Original 2016-08-04 1 R1607216-222427 Rev A Add Model: BMZ653 2016-09-06 Report Number: R1607216-222427 Rev A Page 4 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 1 General Information 1.1 Product Description for Equipment under Test (EUT) This test and measurement report was prepared on behalf of Mobile Communications Inc. and their product: FCC models: BMUX650 & BMUZ650, FCC ID: S4RBMU650 ISED models: BMX650, BMZ650, BMX653 and BMZ653, IC: 3585A-BMC653 which will henceforth be referred to as the EUT (Equipment under Test). The EUT is a wide-band consumer bi- directional booster. Note: BMUX650 was used for testing. Please refer to Appendix I- DOS for details. 1.2 Mechanical Description The EUT measures approximately 4.56” (L) x 2.15” (W) x 1.25” (H), and weighs approximately 1.2 Lbs. The test data gathered are from typical production sample, serial number: 3000506, assigned by BACL. 1.3 Objective This type approval report was prepared on behalf of Mobile Communications Inc. in accordance with Part 2, Subpart J, Part 20.21, Part 22 Subpart H, Part 24 Subpart E, and Part 27 of the Federal Communication Commission’s rules and ISED RSS-131, Issue 2, July 2003. The objective was to determine compliance with FCC/ISED Rules for Spurious Radiated Emissions. 1.4 Related Submittal(s)/Grant(s) None. 1.5 Test Methodology All tests and measurements indicated in this document were performed in accordance with the Code of Federal Regulations Title 47 Part 2, Sub-part J and as well as the following parts: Part 20.21- Signal Boosters Part 22 Subpart H - Public Mobile Services Part 24 Subpart E - Broadband PCS Part 27 -Miscellaneous Wireless Communications Services ISED RSS-131, Zone Enhancers for the Land Mobile Service Applicable Standards: TIA/EIA603-D, FCC KDB 935210. All radiated and conducted emissions measurement was performed at Bay Area Compliance Laboratory, Corp. The radiated testing was performed at an antenna-to-EUT distance of 3 meters. Report Number: R1607216-222427 Rev A Page 5 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 1.6 Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in the field of EMC. The factors contributing to uncertainties are spectrum analyzer, cable loss, antenna factor calibration, antenna directivity, antenna factor variation with height, antenna phase center variation, antenna factor frequency interpolation, measurement distance variation, site imperfections, mismatch (average), and system repeatability. Parameter Measurement uncertainty Occupied Channel Bandwidth ±5 % RF output power, conducted ±0.57 dB Power Spectral Density, conducted ±1.48dB Unwanted Emissions, conducted ±1.57dB All emissions, radiated ±4.0 dB AC power line Conducted Emission ±2.0 dB Temperature ±2 º C Humidity ±5 % DC and low frequency voltages ±1.0 % Time ±2 % Duty Cycle ±3 % 1.7 Test Facility Bay Area Compliance Laboratories Corp. (BACL) is: A- An independent, 3rd-Party, Commercial Test Laboratory accredited to ISO/IEC 17025:2005 by A2LA (Test Laboratory Accreditation Certificate Number 3279.02), in the fields of: Electromagnetic Compatibility and Telecommunications. Unless noted by an Asterisk (*) in the Compliance Matrix (See Section 3 of this Test Report), BACL’s ISO/IEC 17025:2005 Scope of Accreditation includes all of the Test Method Standards and/or the Product Family Standards detailed in this Test Report.. BACL’s ISO/IEC 17025:2005 Scope of Accreditation includes a comprehensive suite of EMC Emissions, EMC Immunity, Radio, RF Exposure, Safety and wireline Telecommunications test methods applicable to a wide range of product categories. These product categories include Central Office Telecommunications Equipment [including NEBS - Network Equipment Building Systems], Unlicensed and Licensed Wireless and RF devices, Information Technology Equipment (ITE); Telecommunications Terminal Equipment (TTE); Medical Electrical Equipment; Industrial, Scientific and Medical Test Equipment; Professional Audio and Video Equipment; Industrial and Scientific Instruments and Laboratory Apparatus; Cable Distribution Systems, and Energy Efficient Lighting. B- A Product Certification Body accredited to ISO/IEC 17065:2012 by A2LA (Product Certification Body Accreditation Certificate Number 3279.03) to certify - For the USA (Federal Communications Commission): 1- All Unlicensed radio frequency devices within FCC Scopes A1, A2, A3, and A4; 2- All Licensed radio frequency devices within FCC Scopes B1, B2, B3, and B4; 3- All Telephone Terminal Equipment within FCC Scope C. Report Number: R1607216-222427 Rev A Page 6 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 - For the Canada (Industry Canada): 1 All Scope 1-Licence-Exempt Radio Frequency Devices; 2 All Scope 2-Licensed Personal Mobile Radio Services; 3 All Scope 3-Licensed General Mobile & Fixed Radio Services; 4 All Scope 4-Licensed Maritime & Aviation Radio Services; 5 All Scope 5-Licensed Fixed Microwave Radio Services 6 All Broadcasting Technical Standards (BETS) in the Category I Equipment Standards List. - For Singapore (Info-Communications Development Authority (IDA)): 1 All Line Terminal Equipment: All Technical Specifications for Line Terminal Equipment – Table 1 of IDA MRA Recognition Scheme: 2011, Annex 2 2. All Radio-Communication Equipment: All Technical Specifications for Radio-Communication Equipment – Table 2 of IDA MRA Recognition Scheme: 2011, Annex 2 - For the Hong Kong Special Administrative Region: 1 All Radio Equipment, per KHCA 10XX-series Specifications; 2 All GMDSS Marine Radio Equipment, per HKCA 12XX-series Specifications; 3 All Fixed Network Equipment, per HKCA 20XX-series Specifications. - For Japan: 1 MIC Telecommunication Business Law (Terminal Equipment): - All Scope A1 - Terminal Equipment for the Purpose of Calls; - All Scope A2 - Other Terminal Equipment 2 Radio Law (Radio Equipment): - All Scope B1 - Specified Radio Equipment specified in Article 38-2-2, paragraph 1, item 1 of the Radio Law - All Scope B2 - Specified Radio Equipment specified in Article 38-2-2, paragraph 1, item 2 of the Radio Law - All Scope B3 - Specified Radio Equipment specified in Article 38-2-2, paragraph 1, item 3 of the Radio Law C- A Product Certification Body accredited to ISO/IEC 17065:2012 by A2LA (Product Certification Body Accreditation Certificate Number 3279.01) to certify Products to USA’s Environmental Protection Agency (EPA) ENERGY STAR Product Specifications for: 1 Electronics and Office Equipment: - for Telephony (ver. 3.0) - for Audio/Video (ver. 3.0) - for Battery Charging Systems (ver. 1.1) - for Set-top Boxes & Cable Boxes (ver. 4.1) - for Televisions (ver. 6.1) - for Computers (ver. 6.0) - for Displays (ver. 6.0) - for Imaging Equipment (ver. 2.0) - for Computer Servers (ver. 2.0) Report Number: R1607216-222427 Rev A Page 7 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 2 Commercial Food Service Equipment - for Commercial Dishwashers (ver. 2.0) - for Commercial Ice Machines (ver. 2.0) - for Commercial Ovens (ver. 2.1) - for Commercial Refrigerators and Freezers 3 Lighting Products - For Decorative Light Strings (ver. 1.5) - For Luminaires (including sub-components) and Lamps (ver. 1.2) - For Compact Fluorescent Lamps (CFLs) (ver. 4.3) - For Integral LED Lamps (ver. 1.4) 4 Heating, Ventilation, and AC Products - for Residential Ceiling Fans (ver. 3.0) - for Residential Ventilating Fans (ver. 3.2) 5 Other - For Water Coolers (ver. 3.0) D- A NIST Designated Phase-I and Phase-II Conformity Assessment Body (CAB) for the following economies and regulatory authorities under the terms of the stated MRAs/Treaties: - Australia: ACMA (Australian Communication and Media Authority) – APEC Tel MRA -Phase I; - Canada: (Industry Canada - IC) Foreign Certification Body – FCB – APEC Tel MRA -Phase I & Phase II; - Chinese Taipei (Republic of China – Taiwan): o BSMI (Bureau of Standards, Metrology and Inspection) APEC Tel MRA -Phase I; o NCC (National Communications Commission) APEC Tel MRA -Phase I; - European Union: o Radio & Teleterminal Equipment (R&TTE) Directive 1995/5/EC US -EU EMC & Telecom MRA CAB - Hong Kong Special Administrative Region: (Office of the Telecommunications Authority – OFTA) APEC Tel MRA -Phase I & Phase II - Israel – US-Israel MRA Phase I - Republic of Korea (Ministry of Communications - Radio Research Laboratory) APEC Tel MRA -Phase I - Singapore: (Infocomm Development Authority - IDA) APEC Tel MRA -Phase I & Phase II; - Japan: VCCI - Voluntary Control Council for Interference US-Japan Telecom Treaty VCCI Side Letter- - USA: o ENERGY STAR Recognized Test Laboratory – US EPA o Telecommunications Certification Body (TCB) – US FCC; - Vietnam: APEC Tel MRA -Phase I; http://www.a2la.org/scopepdf/3297-02.pdf?CFID=1132286&CFTOKEN=e42a3240dac3f6ba-6DE17DCB- 1851-9E57-477422F667031258&jsessionid=8430d44f1f47cf2996124343c704b367816b Report Number: R1607216-222427 Rev A Page 8 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 2 System Test Configuration 2.1 Justification The EUT was configured for testing according to TIA/EIA-603-D. The final qualification test was performed with the EUT operating at normal mode. 2.2 EUT Exercise Software There was no exercise software with the EUT; signal was sent through EUT using a signal generator. 2.3 Equipment Modifications No modifications were made to the EUT. 2.4 EUT Internal Configuration Manufacturer Description Model Serial Number Mobile Communication PCB BMUX650 - 2.5 Local Support Equipment List and Details No local Support Equipment utilized. 2.6 Power Supply and Line Filters Manufacturers Descriptions Models Serial Numbers Smooth Talker AC/DC Adapter BLC240603000WU - 2.7 Interface Ports and Cabling Cable Description Length (m) From To RF cable <1 Signal Generator Input/EUT RF cable <1 Output/EUT Spectrum Analyzer Report Number: R1607216-222427 Rev A Page 9 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 3 Summary of Test Results FCC & ISED Rules Description of Tests Results FCC §2.1053, §22.917(a), §24.238(a), §27.53 Spurious Radiated Emissions Compliant ISED RSS-131 §6.4 FCC §2.1091 RF Exposure Compliant ISED RSS-102 Note: Other testing results please refer to reports BMUX650 (FCC) and BMX650 (ISED) provided by Mobile Communications, Inc. Report Number: R1607216-222427 Rev A Page 10 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 4 FCC §2.1053, §22.917, §24.238, §27.53 & ISED RSS-131 §6.4 - Spurious Radiated Emissions 4.1 Applicable Standards According to FCC §22.917 the power of any emissions outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. According to FCC §24.238(a) the power of any emissions outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. According to FCC §27.53, (c) For operations in the 746-758 MHz band and the 776-788 MHz band, the power of any emission outside the licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, in accordance with the following: (1) On any frequency outside the 746-758 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 log (P) dB; (2) On any frequency outside the 776-788 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 log (P) dB; (3) On all frequencies between 763-775 MHz and 793-805 MHz, by a factor not less than 76 + 10 log (P) dB in a 6.25 kHz band segment, for base and fixed stations; (4) On all frequencies between 763-775 MHz and 793-805 MHz, by a factor not less than 65 +10 log (P) dB in a 6.25 kHz band segment, for mobile and portable stations; (5) Compliance with the provisions of paragraphs (c)(1) and (c)(2) of this section is based on the use of measurement instrumentation employing a resolution bandwidth of 100 kHz or greater. However, in the 100 kHz bands immediately outside and adjacent to the frequency block, a resolution bandwidth of at least 30 kHz may be employed; (6) Compliance with the provisions of paragraphs (c)(3) and (c)(4) of this section is based on the use of measurement instrumentation such that the reading taken with any resolution bandwidth setting should be adjusted to indicate spectral energy in a 6.25 kHz segment. (f) For operations in the 746-758 MHz, 775-788 MHz, and 805-806 MHz bands, emissions in the band 1559-1610 MHz shall be limited to −70 dBW/MHz equivalent isotropically radiated power (EIRP) for wideband signals, and −80 dBW EIRP for discrete emissions of less than 700 Hz bandwidth. For the purpose of equipment authorization, a transmitter shall be tested with an antenna that is representative of the type that will be used with the equipment in normal operation. (g) For operations in the 600 MHz band and the 698-746 MHz band, the power of any emission outside a licensee's frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, by at least 43 + 10 log (P) dB. Compliance with this provision is based on the use of measurement instrumentation employing a resolution bandwidth of 100 kilohertz or greater. However, in the 100 kilohertz bands mobile and portable stations; Report Number: R1607216-222427 Rev A Page 11 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 (h) AWS emission limits—(1) General protection levels. Except as otherwise specified below, for operations in the 1695-1710 MHz, 1710-1755 MHz, 1755-1780 MHz, 1915-1920 MHz, 1995-2000 MHz, 2000- 2020 MHz, 2110-2155 MHz, 2155-2180 MHz, and 2180-2200 bands, the power of any emission outside a licensee's frequency block shall be attenuated below the transmitter power (P) in watts by at least 43 + 10 log10 (P) dB.\ According to IC-RSS 131 §6.4, Spurious Emissions: Spurious emissions of zone enhancers and translators shall be suppressed as much as possible. Spurious emissions shall be attenuated below the rated power of the enhancer by at least: 43 + 10 Log10(Prated in watts), or 70 dB, whichever is less stringent. Note: If the minimum standard is not met, check to see if the input signal generators have a high harmonic content. 4.2 Test Procedure The transmitter was placed on the turntable, and it was transmitting into a non-radiating load which was also placed on the turntable. The measurement antenna was placed at a distance of 3 meters from the EUT. During the tests, the antenna height and polarization as well as EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. The test was performed by placing the EUT on 3-orthogonal axis. The frequency range up to tenth harmonic of the fundamental frequency was investigated. Remove the EUT and replace it with substitution antenna. A signal generator was connected to the substitution antenna by a non-radiating cable. The absolute levels of the spurious emissions were measured by the substitution. Spurious emissions in dB = 10 log (TX Power in Watts/0.001) – the absolute level Spurious attenuation limit in dB = 43 + 10 Log10 (power out in Watts) Report Number: R1607216-222427 Rev A Page 12 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 4.3 Test Equipment List and Details Calibration Calibration Manufacturer Description Model Serial Number Date Interval Agilent Spectrum Analyzer E4440A MY44303352 2015-11-12 1 year Sunol Science Corp System Controller SC99V 011003-1 N/R N/R Sunol Sciences Antenna, Biconi-Log JB1 A013105-3 2015-07-11 2 years A.R.A Antenna, Horn DRG-118/A 1132 2015-09-21 2 years HP Pre-Amplifier 8447D 2944A06639 2016-06-08 1 year 30 ft conductive Suirong LMR 400 - 2016-03-05 1 year emission cable - SMA cable - C0001 Each time1 N/A High Frequency KPS- IW Microwave DC-1531 2015-08-10 1 year Cable 1501A3960KPS HP Pre-Amplifier 8449B 3008A01978 2015-09-02 1 year 721033DB1, 2, 3, COM-POWER Antenna, Dipole AD-100 2014-11-03 2 years 4 Sunol Sciences Antenna, Horn DRH-118 A052704 2015-03-09 2 years HP Generator, Signal 83650B 3614A00276 2015-08-19 1 year Statement of Traceability: BACL Corp. attests that all calibrations have been performed per the A2LA requirements, traceable to the NIST. Report Number: R1607216-222427 Rev A Page 13 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 4.4 Test Setup Block Diagram Radiated Emissions Testing 4.5 Test Environmental Conditions Temperature: 20-21 C Relative Humidity: 47-49  ATM Pressure: 101.4-101.6 kPa The testing was performed by Frank Wang on 2016-7-29 in 5 Meter Chamber 2. Report Number: R1607216-222427 Rev A Page 14 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 4.6 Test Results Band 2 Indicated Test Antenna Substituted S.A. Azimuth Ant. Gain Cable Absolute Limit Margin Frequency Height Polarity Frequency Level Amp. (degree) Correction Loss Level (dBm) (dB) (MHz) (cm) (H/V) (MHz) (dBm) (dBm) (dB) (dB) (dBm) Uplink, 1880 MHz 87.87 -50.57 0 300 H 87.87 -57.71 0 0.071 -57.781 -13 -44.781 50 -54.94 0 300 V 50 -50.72 0 0.071 -50.791 -13 -37.791 3760 -54.32 341 300 H 3760 -50.81 10.338 0.87 -41.342 -13 -28.342 3760 -54.94 223 300 V 3760 -50.22 10.348 0.87 -40.742 -13 -27.742 Downlink, 1960 MHz 51.72 -51.63 320 300 H 51.72 -52.72 0 0.071 -52.791 -13 -39.791 50.12 -46.93 0 300 V 50.12 -42.71 0 0.071 -42.781 -13 -29.781 2404 -59.02 320 300 H 2404 -56.4 9.344 0.695 -47.751 -13 -34.751 2433 -60.43 320 300 V 2433 -58.42 9.361 0.695 -49.754 -13 -36.754 Band 25 Indicated Test Antenna Substituted S.A. Azimuth Ant. Gain Cable Absolute Limit Margin Frequency (degree) Height Polarity Frequency Level Amp. Correction Loss Level (dBm) (dB) (MHz) (cm) (H/V) (MHz) (dBm) (dBm) (dB) (dB) (dBm) Uplink, 1882.5 MHz 89.53 -50.29 0 300 H 89.53 -57.43 0 0.071 -57.501 -13 -44.501 51.57 -46.58 0 300 V 51.57 -42.36 0 0.071 -42.431 -13 -29.431 3765 -54.47 164 300 H 3765 -50.98 10.338 0.87 -41.512 -13 -28.512 3765 -54.49 264 300 V 3765 -49.79 10.348 0.87 -40.312 -13 -27.312 Downlink, 1962.5 MHz 51.72 -51.63 0 300 H 51.72 -52.72 0 0.071 -52.791 -13 -39.791 50.12 -46.93 0 300 V 50.12 -42.71 0 0.071 -42.781 -13 -29.781 1280 -60.27 0 300 H 1280 -60.78 7.031 0.335 -54.084 -13 -41.084 1040 -60.41 0 300 V 1040 -63.13 5.862 0.335 -57.603 -13 -44.603 Report Number: R1607216-222427 Rev A Page 15 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 Band 5 Indicated Test Antenna Substituted S.A. Azimuth Ant. Gain Cable Absolute Limit Margin Frequency (degree) Height Polarity Frequency Level Amp. Correction Loss Level (dBm) (dB) (MHz) (cm) (H/V) (MHz) (dBm) (dBm) (dB) (dB) (dBm) Uplink, 836.5 MHz 88.2 -50.22 0 300 H 88.2 -57.36 0 0.071 -57.431 -13 -44.431 51.02 -47.06 0 300 V 51.02 -42.84 0 0.071 -42.911 -13 -29.911 1673 -57.43 200 300 H 1673 -62.53 9.013 0.423 -53.94 -13 -40.94 1673 -57.52 360 300 V 1673 -62.41 8.948 0.423 -53.885 -13 -40.885 Downlink, 881.5 MHz 51.57 -52.38 0 300 H 51.57 -53.47 0 0.071 -53.541 -13 -40.541 49.98 -46.52 0 300 V 49.98 -42.3 0 0.071 -42.371 -13 -29.371 1000 -59.42 0 300 H 1000 -62.03 5.993 0.335 -56.372 -13 -43.372 1720 -60.79 0 300 V 1720 -62.26 8.948 0.423 -53.735 -13 -40.735 Band 12 Indicated Test Antenna Substituted S.A. Azimuth Ant. Gain Cable Absolute Limit Margin Frequency Height Polarity Frequency Level Amp. (degree) Correction Loss Level (dBm) (dB) (MHz) (cm) (H/V) (MHz) (dBm) (dBm) (dB) (dB) (dBm) Uplink, 707 MHz 89.95 -50.41 0 300 H 89.95 -57.55 0 0.071 -57.621 -13 -44.621 51.47 -47.11 0 300 V 51.47 -42.89 0 0.071 -42.961 -13 -29.961 1414 -53.72 303 300 H 1414 -60.87 7.638 0.423 -53.655 -13 -40.655 1414 -54.4 257 300 V 1414 -61.04 6.426 0.423 -55.037 -13 -42.037 Downlink, 737 MHz 51.72 -52.05 0 300 H 51.72 -53.14 0 0.071 -53.211 -13 -40.211 50.07 -46.8 0 300 V 50.07 -42.58 0 0.071 -42.651 -13 -29.651 1160 -59.07 0 300 H 1160 -59 6.667 0.335 -52.668 -13 -39.668 1080 -58.65 0 300 V 1080 -60.48 6.426 0.335 -54.389 -13 -41.389 Report Number: R1607216-222427 Rev A Page 16 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 Band 17 Indicated Test Antenna Substituted S.A. Azimuth Ant. Gain Cable Absolute Limit Margin Frequency (degree) Height Polarity Frequency Level Amp. Correction Loss Level (dBm) (dB) (MHz) (cm) (H/V) (MHz) (dBm) (dBm) (dB) (dB) (dBm) Uplink, 710 MHz 87.67 -50.32 0 300 H 87.67 -57.46 0 0.071 -57.531 -13 -44.531 51.18 -46.82 0 300 V 51.18 -42.6 0 0.071 -42.671 -13 -29.671 1420 -55.83 320 300 H 1420 -62.45 7.638 0.423 -55.235 -13 -42.235 2130 -56.5 320 300 H 2130 -59.63 8.066 0.591 -52.155 -13 -39.155 1424 -54.65 255 300 V 1424 -61.24 7.557 0.423 -54.106 -13 -41.106 Downlink, 740 MHz 51.63 -52.35 0 300 H 51.63 -54.44 0 0.071 -54.511 -13 -41.511 50.02 -46.9 0 300 V 50.02 -42.68 0 0.071 -42.751 -13 -29.751 1000 -59.19 0 300 H 1000 -61.8 5.993 0.335 -56.142 -13 -43.142 1000 -59.13 0 300 V 1000 -61.13 5.862 0.335 -55.603 -13 -42.603 Band 13 Indicated Test Antenna Substituted S.A. Azimuth Ant. Gain Cable Absolute Limit Margin Frequency (degree) Height Polarity Frequency Level Amp. Correction Loss Level (dBm) (dB) (MHz) (cm) (H/V) (MHz) (dBm) (dBm) (dB) (dB) (dBm) Uplink, 782 MHz 88.88 -50.65 0 300 H 88.88 -57.79 0 0.071 -57.861 -13 -44.861 51.12 -47.01 0 300 V 51.12 -42.79 0 0.071 -42.861 -13 -29.861 1561 -57.01 360 300 H 1561 -63.47 8.618 0.423 -55.275 -13 -42.275 1565 -56.41 275 300 V 1565 -63.37 8.63 0.423 -55.163 -13 -42.163 Downlink, 751 MHz 51.65 -52.4 0 300 H 51.65 -53.49 0 0.071 -53.561 -13 -40.561 51.48 -46.6 0 300 V 51.48 -42.38 0 0.071 -42.451 -13 -29.451 1080 -59.89 0 300 H 1080 -62.5 6.477 0.335 -56.358 -13 -43.358 1000 -60.37 0 300 V 1000 -62.37 5.862 0.335 -56.843 -13 -43.843 Report Number: R1607216-222427 Rev A Page 17 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 Band 4 Indicated Test Antenna Substituted S.A. Azimuth Ant. Gain Cable Absolute Limit Margin Frequency (degree) Height Polarity Frequency Level Amp. Correction Loss Level (dBm) (dB) (MHz) (cm) (H/V) (MHz) (dBm) (dBm) (dB) (dB) (dBm) Uplink, 1732.5 MHz 87.55 -50.67 0 300 H 87.55 -57.81 0 0.071 -57.881 -13 -44.881 51.25 -47.39 0 300 V 51.25 -43.17 0 0.071 -43.241 -13 -30.241 3465 -53.75 256 300 H 3465 -51.74 9.634 0.87 -42.376 -13 -29.976 3465 -51.06 200 300 V 3465 -47.61 9.583 0.87 -38.897 -13 -25.897 Downlink, 2132.5 MHz 51.65 -52.34 0 300 H 51.65 -53.43 0 0.071 -53.501 -13 -40.501 49.85 -46.69 0 300 V 49.85 -42.47 0 0.071 -42.541 -13 -29.541 1040 -60.78 0 300 H 1040 -63.39 5.993 0.335 -57.732 -13 -44.732 1160 -60.44 0 300 V 1160 -60.31 6.618 0.335 -54.027 -13 -41.027 Report Number: R1607216-222427 Rev A Page 18 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 5 FCC §2.1091 & ISED RSS-102 - RF Exposure 5.1 Applicable Standard According to FCC §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for General Population/Uncontrolled Exposure Frequency Electric Field Magnetic Field Power Density Averaging Time Range Strength Strength (mW/cm2) (minutes) (MHz) (V/m) (A/m) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 * (100) 30 2 1.34-30 824/f 2.19/f * (180/f ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density 5.2 MPE Prediction Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 S = PG/4R² Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna 5.3 MPE Results Band 5: Maximum peak output power at antenna input terminal (dBm): 25.6 Maximum peak output power at antenna input terminal (mW): 363.08 Prediction distance (cm): 20 Prediction frequency (MHz): 824.2 Maximum Antenna Gain, typical (dBi): 1 Maximum Antenna Gain (numeric): 1.259 Power density of prediction frequency at 20.0 cm (mW/cm2): 0.091 MPE limit for uncontrolled exposure at prediction frequency (mW/cm2): 0.5495 Report Number: R1607216-222427 Rev A Page 19 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 Band 12 & Band 17 Maximum peak output power at antenna input terminal (dBm): 26.3 Maximum peak output power at antenna input terminal (mW): 426.58 Prediction distance (cm): 20 Prediction frequency (MHz): 699.2 Maximum Antenna Gain, typical (dBi): 1 Maximum Antenna Gain (numeric): 1.259 Power density of prediction frequency at 20.0 cm (mW/cm2): 0.107 MPE limit for uncontrolled exposure at prediction frequency (mW/cm2): 0.466 Band 13: Maximum peak output power at antenna input terminal (dBm): 25.9 Maximum peak output power at antenna input terminal (mW): 389.045 Prediction distance (cm): 20 Prediction frequency (MHz): 746.2 Maximum Antenna Gain, typical (dBi): 1 Maximum Antenna Gain (numeric): 1.259 Power density of prediction frequency at 20.0 cm (mW/cm2): 0.097 MPE limit for uncontrolled exposure at prediction frequency (mW/cm2): 0.4975 Band 2 & Band 25 Maximum peak output power at antenna input terminal (dBm): 26.0 Maximum peak output power at antenna input terminal (mW): 398.107 Prediction distance (cm): 20 Prediction frequency (MHz): 1852.4 Maximum Antenna Gain, typical (dBi): 1 Maximum Antenna Gain (numeric): 1.259 Power density of prediction frequency at 20.0 cm (mW/cm2): 0.0997 MPE limit for uncontrolled exposure at prediction frequency (mW/cm2): 1.0 Band 4: Maximum peak output power at antenna input terminal (dBm): 27.4 Maximum peak output power at antenna input terminal (mW): 549.5409 Prediction distance (cm): 20 Prediction frequency (MHz): 1712.4 Maximum Antenna Gain, typical (dBi): 1 Maximum Antenna Gain (numeric): 1.259 Power density of prediction frequency at 20.0 cm (mW/cm2): 0.1377 MPE limit for uncontrolled exposure at prediction frequency (mW/cm2): 1.0 The device is compliant with the requirement MPE limit for uncontrolled exposure at the distance of 20 cm. Report Number: R1607216-222427 Rev A Page 20 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report

Mobile Communications Inc. FCC ID: S4RBMU650; IC: 3585A-BMC653 5.4 ISED Exemption of RF Exposure Evaluation According to ISED RSS-102, Issue 5 section 2.5.2 exemption limits for routine evaluation. RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows: • at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10-2ƒ0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz; In these cases, the information contained in the RF exposure technical brief may be limited to information that demonstrates how the e.i.r.p. was derived. The maximum e.i.r.p. of device is less than the exemption limits. Routine RF exposure evaluation is not required. Refer to 3585A-BMC653 IC Test Report V1.2 Section 3.6 Report Number: R1607216-222427 Rev A Page 21 of 35 FCC Part 22H/24E/27, ISED RSS-131 Test Report


Document Created: 2017-12-15 03:13:36
Document Modified: 2017-12-15 03:13:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC