TCB Q and A

FCC ID: S3CBTSLINK-208

Cover Letter(s)

Download: PDF
FCCID_964134

Page 1 of 1 Shyam Telecom Inc., FCC ID: S3CBTSLINK-208, Assessment NO.: AN08T7978, Notice#2 Inbox X from tim.dwyer@ccsemc.com to weili2@ac-lab.com cc tim.dwyer@ccsemc.com date Wed, Jun 18, 2008 at 11:50 AM subject Shyam Telecom Inc., FCC ID: S3CBTSLINK-208, Assessment NO.: AN08T7978, Notice#2 Hello Wei, I am re-sending this notice because I received an undeliverable error the first time. I tried to reach you by phone also to check the email address. Review of this application is complete. Please reply to the following items: Q1: This product fits the definition for a Fiber-Optic Distribution System as described in the FCC Amplifier, Booster, and Repeater Guidance. Since it appears that the Master and Remote units enclolsures, the FCC guidance requires that they have separate FCCIDS. Please submit a separate application or provide additional explanation. Q2: The Equipment Code entered in the application was AMP-Amplifier. It appears that the correct Equipment Code for this device should be PCB-PCS Licensed Transmitter. Please confirm Q3: Equipment Specification information (frequency range, power, freq. tol. emission designator) was not entered in the application. Please provide maximum power in watts for each frequen Q4: Page 5/40 of user manual specifies an MPE distance of 40 cm. The test report MPE distances are 50 cm indoor, 112 cm outdoor. Please revise the user manual. Best regards, Tim Dwyer Technical Reviewer The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-m forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be dire sender. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-m forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be dire sender. http://mail.google.com/mail/?ui=2&view=bsp&ver=ymdfwq781tpu 6/22/2008

Page 1 of 2 Hi Wei, Please give me a call at 860-558-1791 when you have a chance. I tried to call you but was forwarded to the general voicemail. Thanks, Tim - Show quoted text - Reply Forward from Tim Dwyer <Timothy_Dwyer@ieee.org> to W Li <weili@ac-lab.com> date Wed, Jun 18, 2008 at 8:16 PM subject Re: Fwd: Delivery Status Notification (Failure) mailed-by gmail.com Hi Wei, With reference to Q1, please provide more detail about the connection between MOU and BTS. If the connection is always with cable and never with antenna, then the MOU is a "Non-Transm Host Units" are subject only to FCC Verification, no FCCID. If this is the case, please provide a confirming statement that the MOU meets the relevant FCC Part 15 Verification requirements. In the FCCID will be placed only on the ROU. Please also provide an explanation of the purpose of the "Ant." port on the MOU. In future cases with "Non-Transmitting Hosts", please do not include test data or other information for the host (MOU) in the certification filing. Best regards, Tim Dwyer - Show quoted text - Reply Forward from W Li <weili@ac-lab.com> to Tim Dwyer <Timothy_Dwyer@ieee.org> date Wed, Jun 18, 2008 at 8:25 PM subject Re: Fwd: Delivery Status Notification (Failure) Hi, Tim. Yes. It should be the case you described. I'll send you the detailed info on MOU antenna port, which is not supposed to be used for repeater RF operation. Most likely, it's for monitoring modem Thanks again. - Show quoted text - Reply Forward from W Li <weili@ac-lab.com> to Tim Dwyer <Timothy_Dwyer@ieee.org> cc weili3@aol.com date Sun, Jun 22, 2008 at 9:01 PM subject Re: Fwd: Delivery Status Notification (Failure) Hi, Tim. Here is the answer for your Qs: 1. With reference to Q1, please provide more detail about the connection between MOU and BTS. If the connection is always with cable and never with a Transmitting Host unit" per FCC definition. "Non-Transmitting Host Units" are subject only to FCC Verification, no FCCID. YES , BTS is connected to MOU through 30db coupler permanently & is not connected to Antenna Hence MOU is a "Non-Transmitting Host Unit" Find system diagram with BTS ,MOU & ROU connectivity If this is the case, please provide a confirming statement that the MOU meets the relevant FCC Part 15 Verification requirements. In this case the certifica FCCID will be placed only on the ROU. Please also provide an explanation of the purpose of the "Ant." port on the MOU This Ant port is used for Modem (for remotely monitoring status of the system), which is not included in this application. 2. Min. MPE distance is 50cm for Indoor , 120cm for Outdoor will be used in the user manual. 3. Please see the info on page 5 in FCC report and page 20 in IC report for all the power rating and frequency band info: ***** DL frequecny Bands: 869-894MHz and 1930-1990MHz Modulation: GSM/EDGE/CDMA DL Power Rating: 1. Max. Composite/Single Channel Output Power: +33 dbm 2. Rated Multi-channel Output Power in each band: 1) 2CH +30 dbm 2) 4CH +27 dbm 3) 8CH +24 dbm And UL Power Rating: Rated Composite Power -25dBm ( this may not be useful info for this application anymore since only ROU Downlink ban under this approval now) http://mail.google.com/mail/?ui=2&view=bsp&ver=ymdfwq781tpu 6/22/2008

Page 2 of 2 Regards, Wei http://mail.google.com/mail/?ui=2&view=bsp&ver=ymdfwq781tpu 6/22/2008


Document Created: 2008-06-22 21:44:00
Document Modified: 2008-06-22 21:44:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC