Users Manual

FCC ID: S29TX5803

Users Manual

Download: PDF
FCCID_1921874

Guangzhou Walkera Technology Co. Ltd. \\\\\\ Taishi Industrial Park, Panyu Dist., WUOUIKer0O Guangzhou 511475, China Tel.: (86—20) 8491 5116 — Fax: (86—20) 8491 5117 Walkera :info@walkera.com;service@walkera.com _ Website:www.walkera.com TX5803 Transmitter instruction 1. Summary: TX5803 is 5.8G image transmit system, matched with DEVO—F4 or DEVO—F7, that can get real—time monitor of aircraft on the transmitter. 2. Main features: (1) 5.8G real—time wireless image monitor; (2) Voltage 7.A4V—15V; (3) Output power <200mw; (4) B section 4 channels; (5) Electricity <400mA; 3. Pictures illustration: Connect to DVO4 plug £€O8SXL:0I D04 |[ P Antenna Channel switch Power plug 4. TX5803 Transmitting channel selection There are 4 different channels can be selected. You can choose the best frequency channel according to the image quality like follows: ON ON ON ON [ 1 0 [ [] 1 0 U 1 _D ) ) 1 2 3 1 2 3 1 2 3 1 2 3 Channel 2 code Channel 4 code Channel 6 code Channel 8 code position position position position Remark: (1) TX5803 Transmitting channel is corresponding to the video receive channel. 5. DV04 Camera connect lllustration Transfer Wire JST power connector TX5803 Transmitter

FCC Information This device complies with part 15 of the FCC results. Operations is subject to the following two conditions: (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to part 15 of FCC Rules. These Limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, users can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try contact the interference by one or more of the following measures: 1.1 Reorient or relocate the receiving antenna. 1.2 Increase the separation between the equipment and receiver. 1.3 Connect the equipment into an outlet on a circuit different from that two which receiver is connected. 1.4 Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. RF exposure statement This module meets the requirements for a mobile device that may be used at separation distances of more than 20cm from the human body. It may be used in hand-held controllers that provide a separation distance of at least 5cm between the antenna and the body (excluding hands wrists). The instructions to the user for the host device must include information requiring the product be used in a manner to ensure the appropriate separation (20cm or 5cm) between antenna and body and requiring that the transmitter not be collocated with another transmitter device.


Document Created: 2013-03-14 15:37:01
Document Modified: 2013-03-14 15:37:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC