MPE Report BT

FCC ID: RYYEYSGCC

RF Exposure Info

Download: PDF
FCCID_3454253

RF Exposure / MPE Calculation No. : 4787971961-E2V2 Applicant : TAIYO YUDEN CO., LTD. Type of Equipment : Bluetooth Dual-mode Module Model No. : EYSGCC FCC ID : RYYEYSGCC TAIYO YUDEN CO., LTD. declares that Model: EYSGCC complies with FCC radiation exposure requirement specified in the FCC Rule 2.1091 (for mobile). RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided with the “EYSGCC“ as calculated from (B) Limits for General Population / Uncontrolled Exposure of TABLE 1- LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) of §1.1310 Radiofrequency radiation exposure limits. This calculation is based on the highest EIRP possible from the system, considering maximum power and antenna gain, and considering a 1mW/cm^2 uncontrolled exposure limit. The Friis formula used was: PG S  4  r2 Where P= 15.85 mW (Maximum average output power) Frame power was used for the above value in consideration of 6-minutes time-averaging Burst power was used for the above value in consideration of worst condition. G= 0.832 Numerical Antenna gain; equal to -0.8 dBi r= 20 cm (Separation distance) Power Density Result S = 0.00262 mW/cm2 Even taking into account the tolerance, this device can be satisfied with the limits. UL Korea, Ltd. Suwon Laboratory 218 Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16675, Korea TEL: (031) 337-9902 FAX: (031) 213-5433 UL Korea, Ltd. Confidential This report shall not be reproduced except in full, without the written approval of UL Korea, Ltd.


Document Created: 2017-07-05 14:35:18
Document Modified: 2017-07-05 14:35:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC