Users manual

FCC ID: RYD-IHCTB627CW

Users Manual

Download: PDF
FCCID_3264576

Wireless Home Music System User‘s Guide for Model IHCTBAO27CW v1831—01 IHCTBA27CW—IB —Lab.indd 1 1/18/2017 10:02:58 AM

Safety Instructions & Warnings CAUTION WARNING: To reduce the risk of electric shock, do not remove cover (or back). No RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION user-serviceable parts inside. Refer servicing RISQUE D' ÉLECTROCUTION NE PAS OUVRIR to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. This product utilizes a Class 1 laser to read Compact Discs. This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated. Invisible laser radiation is present when the CD Player’s lid is open and the system’s interlock has failed or been defeated. It is very important that you avoid direct exposure to the laser beam at all times. Please do not attempt to defeat or bypass the safety switches. 2 IHCTB627CW-IB -Lab.indd 2 1/18/2017 10:02:59 AM

Important Safety Instructions Battery Warnings • Read these Instructions. • WARNING: Do not ingest the battery, Chemical Burn • Keep these Instructions. Hazard. • Heed all Warnings. • The remote control supplied with this product contains a coin/button cell battery. • Follow all instructions. • If the coin/button cell battery is swallowed, it can cause • Do not use this apparatus near water. severe internal burns in just 2 hours and can lead to death. • Clean only with a dry cloth. • Keep new and used batteries away from children. Iff the • Do not block any ventilation openings. Install in accordance battery compartment does not close securely, stop using the with the manufacturer’s instructions. product and keep it away from children. • Do not install near any heat sources such as radiators, heat • If you think batteries might have been swallowed or registers, stoves, or other apparatus (including amplifiers) placed inside and part of the body, seek immediate medical that produce heat. attention. • Do not defeat the safety purpose of the polarized or • CAUTION: Danger of explosion if battery is incorrectly grounding - type plug. A polarized plug has two blades with replaced. Replace only with the same or equivalent type. one wider than the other. A grounding type plug has two • WARNING: There is a danger of explosion if you attempt blades and a third grounding prong. The wide blade or the to charge standard Alkaline batteries in the unit. Only use third prong are provided for your safety. When the provided rechargeable NiMH batteries. plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Battery shall not be exposed to excessive heat such as sunshine, fire or the like. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point • Do not mix old and new batteries. where they exit from the apparatus. • Completely replace all old batteries with new ones. • Only use attachments/accessories specified by the • Do not mix alkaline, standard (carbon-zinc), or rechargeable manufacturer. (ni-cad, ni-mh, etc) batteries. • Unplug this apparatus during lightning storms or when • Batteries should be recycled or disposed of as per state and unused for long periods of time. local guidelines. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any Additional Warnings and Precautions way, such as power-supply cord or plug is damaged, liquid • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH has been spilled or objects have fallen into the apparatus, WIDE BLADE OF PLUG TO WIDE SLOT, FULLY the apparatus has been exposed to rain or moisture, does not INSERT. operate normally, or has been dropped. • Mains plug is used as disconnect device and it should remain • Use only with a cart, stand, tripod, bracket, readily operable during intended use. In order to disconnect or table specified by the manufacturer, or the apparatus from the mains completely, the mains plug sold with the apparatus. When a cart is should be disconnected from the mains socket outlet used, use caution when moving the cart/ completely. apparatus combination to avoid injury from • CAUTION: Use of controls or adjustments or performance tip-over. of procedures other than those specified may result in hazardous radiation exposure. • WARNING: Changes or modifications not expressly FCC Warnings approved by the party responsible for compliance could void the user's authority to operate the equipment. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Notice: This device complies with Part 15 of the FCC Rules. NOTE: This equipment has been tested and found to comply Operation is subject to the following two conditions: (1) This with the limits for a Class B digital device, pursuant to Part device may not cause harmful interference. (2) This device 15 of the FCC Rules. These limits are designed to provide must accept any interference received, including interference reasonable protection against harmful interference in a that may cause undesired operation. residential installation. This equipment generates uses and can • WARNING: Use of this unit near fluorescent lighting may radiate radio frequency energy and, if not installed and used in cause interference regarding use of the remote. If the unit is accordance with the instructions, may cause harmful interference displaying erratic behavior move away from any fluorescent to radio communications. However, there is no guarantee that lighting, as it may be the cause. interference will not occur in a particular installation. If this • WARNING: Shock hazard - Do Not Open. equipment does cause harmful interference to radio or television • Caution and marking information is located at the rear or reception, which can be determined by turning the equipment off bottom of the apparatus. and on, the user is encouraged to try to correct the interference • WARNING: To reduce the risk of fire or electric shock, by one or more of the following measures: do not expose this apparatus to rain, moisture, dripping, or • Reorient or relocate the receiving antenna. splashing. • Increase the separation between the equipment and receiver. • Objects filled with liquids, such as vases, shall not be placed • Connect the equipment into an outlet on a circuit different on the apparatus. from that to which the receiver is connected. • WARNING: This product may contain chemicals known • Consult the dealer or an experienced radio/TV technician to the State of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after for help. handling. • This product meets and complies with all Federal regulations. 3 IHCTB627CW-IB -Lab.indd 3 1/18/2017 10:02:59 AM

Table of Contents Setup������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 5 Includes Power Speakers Orientation ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 6 Features & Controls Remote Control ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 8 Functions Batteries Connecting External Devices���������������������������������������������������������������������������������������������������������������������������������������������������� 9 Pairing Bluetooth and Playing Audio Wirelessly Using the Aux In (3.5mm Audio Input) RCA Audio Output Operation��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������10 Playing a Record Loading and Playing a CD Programming a CD Playing the AM/FM Radio Programming Radio Station Presets Playing a Cassette Tape Customer Support����������������������������������������������������������������������������������������������������������������������������������������������������������������������12 Contact Information Warranty International Support 4 IHCTB627CW-IB -Lab.indd 4 1/18/2017 10:02:59 AM

Setup Includes • Remote control with CR2025 battery • 45 rpm adapter • User's Guide SPEAKER OUTPUT AUDIO OUTPUT R L R L FM ANT. 120V~60Hz Power Plug the built in AC power cord into a standard wall outlet. AUDIO OUTPUT R L AUDIO OUTPUT R L Speakers Connect the speaker wires to the speaker inputs on the turntable. Be sure to match the positive (red) and negative (black) wires to their corresponding inputs. 5 IHCTB627CW-IB -Lab.indd 5 1/18/2017 10:03:01 AM

Orientation Features & Controls Dust Cover SPEAKER OUTPUT AUDIO OUTPUT R L R L FM ANT. Audio Output 120V~60Hz Connect to send audio signal to an external source. Cassette Player Speaker Output Connect included FM Antenna speakers here. Speakers Remote Display Volume Receiver VOLUME MIN MAX  CD PLAYER OPEN / CLOSE / – TUNE / SKIP + REPEAT 1 / ALL SOURCE POWER AUX IN Aux In (3.5mm Power Audio Input) CD Player Open/Close Stop Source Play/Pause/Pair Tune/Skip Track Bluetooth Repeat 1/All 6 IHCTB627CW-IB -Lab.indd 6 1/18/2017 10:03:02 AM

45 rpm Record Adapter Tone Arm Lift Switch Turntable Tone Arm Lock Tone Arm & Stylus Auto Stop Select ON or OFF. Record Speed Choose 33, 45, or 78, depending on the type of record to be played. 7 IHCTB627CW-IB -Lab.indd 7 1/18/2017 10:03:03 AM

Remote Control Functions Power Open Press to power the POWER OPEN Press to open the CD player. system ON or OFF. Stop Source SOURCE Press to stop audio track. Press to set the media source. Play/Pause/Pair Repeat 1/All Press to play or pause an Press to repeat 1 audio track or audio track. all audio tracks on a loaded CD. In Bluetooth mode, press REPEAT 1 and hold to pair. Stop / ALL Press to stop and audio track. Volume TUNE – TUNE + Press to adjust volume. Skip/Tune Press to skip and audio track. Mute In FM radio mode, press Press to mute volume. to adjust the tuning. Prog VOLUME Press to program tracks to play in a specific order. PROG MUTE Batteries Requires 1 CR2025 battery (included). 8 IHCTB627CW-IB -Lab.indd 8 1/18/2017 10:03:03 AM

Connecting External Devices Pairing Bluetooth and Playing Audio Wirelessly 1. Set the Source to BT and press and hold the Play/Pause/Pair button. The pairing indicator will begin quickly flashing blue. When pairing, remain within 3 feet of the unit. 2. Using the controls on your Bluetooth device, search for and select IHCTB627 in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0 . if need be, refer to the user‘s manual for your specific device for instructions on pairing and connecting Bluetooth devices. 3. When successfully paired and connected, an audible chime will sound and the pairing indicator will turn solid. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat these steps. 4. Use the controls on your connected Bluetooth Device to select and begin playing audio. Play, pause or skip a selected track using the controls on the connected Bluetooth Device or the controls on the turntable. Using the Aux In (3.5mm Audio Input) Requires 3.5 mm audio input cable (not included). 1. Plug a 3.5 mm audio input cable into the Aux In on the unit and the headphone jack on an MP3 Player or other audio source. 2. Set the Source to Aux and use the controls on your connected music player to select and play audio. 3. Audio played through the connected device should now be heard through the speakers. RCA Audio Output Requires RCA audio cables (red/white, not included). Use to connect the turntable to an external stereo system. 1. Connect RCA audio cables to the Audio Output on the back of the turntable, and to the audio input of an external stereo system. O OJ 2. Ifneed be, adjust the external stereo system to accept input from the turntable. 3. Audio played through the turntable should now be heard through the connected stereo system. \_______J Note : The Audio Output sends a fixed audio volume level to any connected audio device. To adjust the volume, you must change it from the connected device. IHCTBE27CW—IB —Lab.indd 9 1/18/2017 10:03:06 AM

Operation Playing a Record It is recommended that you use extreme care when manipulating the tone arm, stylus, and other components of this turntable. These parts are very sensitive and can easily break or become damaged if they are carelessly handled. 1. Set the Source to Phono. 2. Lift open the turntable cover and place the record on the turntable. If you are playing a 45 rpm record, use the included 45 rpm adapter and place it between the turntable and the record. 3. Remove the shroud that protects the stylus and release the lock that holds the Tone Arm in place. 4. Use the Tone Arm Lift Switch to raise the Tone Arm from its catch. Lock Unlock 5. Using your hand, gently swing the Tone Arm into the desired location over the record. The turntable will start spinning as the Tone Arm is moved into position. 6. Use the Tone Arm Lift Switch to safely lower the stylus onto the record. Using the Lift Switch instead of your hand will reduce the chance of accidentally damaging the record or the stylus. 7. Slide the Auto Stop Switch to ON to enable the Auto Stop feature. When the record is finished playing, it will automatically stop the turntable. Use the Lift Switch to raise the stylus off of the record, and gently return the Tone Arm to the catch by hand. Note: Some records place their Auto Stop area outside of the range of this unit. In these cases, the record will stop playing before the last track is reached. Set the Auto Stop Switch to OFF and use the Tone Arm Lift Switch to safely raise the stylus off the record when the end of the record has been reached. 8. When not in use, secure and lock the Tone Arm in its resting position and replace the protective shroud over the stylus. This will minimize the risk of accidental damage to these sensitive parts. 10 IHCTB627CW-IB -Lab.indd 10 1/18/2017 10:03:06 AM

Loading and Playing a CD 1. Press the Open/Close button to open the CD tray. 2. Place a CD in the tray, label side facing up, and close the CD tray. 3. Set the Source to CD mode. 4. Use the controls on the unit to begin play, pause, stop and skip audio on the loaded disc. Programming a CD 1. Press the Stop button to stop a loaded CD. 2. Press the Prog button on the remote. “01” will blink on the display. 3. Press the Skip Fwd/Rev buttons to select a track. 4. Press the Prog button to add the selected track to the program. Repeat this process to program up to 20 tracks to play in a specified order. 5. Press the Stop button to cancel a program. Playing the AM/FM Radio Adjust the position of the antenna to improve AM/FM radio reception. 1. Set the Source to Tune mode. 2. Use the Tuning buttons to tune to a desired frequency band. Programming Radio Station Presets 1. With the radio on, tune to a desired frequency and press & hold the Prog button on the remote or the unit. 2. Press the Tune+/- buttons on the remote to select a preset number. Up to 20 stations may be preset. 3. Once you have selected the preset number you wish to program, press the Prog button again to save the current station to that preset. Playing a Cassette Tape 1. Set the Source to Tape. 2. Insert a cassette tape in the Cassette Door on the side of the unit. 3. Use the control button on the side of the unit to play, fast forward and eject the cassette. Play Fast Forward Eject PLAY F.FWD F.FWD 11 IHCTB627CW-IB -Lab.indd 11 1/18/2017 10:03:07 AM

Customer Support Contact Information Website: www.iliveelectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iliveelectronics.com Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iliveelectronics.com Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur: www.iliveelectronics.com Made Green Protect for Today Sustain for Tomorrow Copyright © 2017 Digital Products International (DPI, Inc.). All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice. 12 IHCTB627CW-IB -Lab.indd 12 1/18/2017 10:03:07 AM


Document Created: 2017-01-18 10:03:07
Document Modified: 2017-01-18 10:03:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC