DTS-UNII_Declaration Letter

FCC ID: RX3-WBU034

Cover Letter(s)

Download: PDF
FCCID_3113107

 Date: August 23, 2016

                                     DTS-UNII Device Declaration Letter
To whom it may concern:
We have declared below featured for FCC equipment authorization,
Device FCC ID: RX3-WBU034


(1)       DFS Device --     Master ,     Client with Radar detection capability ,
                  Client without radar detection capability,   N/A

(2)       Active / Passive Scanning , adhoc mode access point capability
              Frequency Band              Active Scanning        passive scanning           Ad Hoc Mode or             Access point
                   (MHz)                  (the device can      (where the device is           WIFI Direct               capability
                                         transmit a probe     can listen only with no          capability
                                             (beacon))                probes)
              2412 - 2462MHz                  Yes ,    No             Yes ,    No               Yes ,    No              Yes ,   No
              5150 - 5250MHz                  Yes ,    No             Yes ,    No               Yes ,    No              Yes ,   No
              5250 - 5350MHz                  Yes ,    No             Yes ,    No               Yes ,    No              Yes ,   No
              5470 - 5725MHz                  Yes ,    No             Yes ,    No               Yes ,    No              Yes ,   No
              5725 - 5850MHz                  Yes ,    No             Yes ,    No               Yes ,    No              Yes ,   No
                                                                                                   `


(3)         Country code selection ability -  Yes ,     No
If yes, pls explain how it was implemented : (pls also help to provide detail of options for each country selection)

(4)        Meet 15.202 requirement -         Yes ,     No ,
pls check below :
    A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an
enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices
    A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the
master. A device in client mode is not able to initiate a network…

(5)       For client devices that have software configuration control to operate in different modes (active scanning in some and
passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS
frequencies) or modular devices which configure the modes of operations through software, the application must provide
software and operations description on how the software and / or hardware is implemented to ensure that proper operations
modes can not be modified by end user or an installer.
    Apply , “Yes , please see SW security Description”.    No Apply , (If apply , pls help to provide explanation on it was
implement , and how software was controlled)



Signature:

Name / Title: Cathy Kuo / Supervisor

Address: No.151, Sec. 1, Nankan Rd., Lujhu Township, Taoyuan County, 33859, Taiwan (R.O.C)



Document Created: 2016-08-23 10:10:15
Document Modified: 2016-08-23 10:10:15

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC