RF Exposure Info

FCC ID: RWO-RZ010282

RF Exposure Info

Download: PDF
FCCID_4107721

FCC RF EXPOSURE REPORT FCC ID: RWO-RZ010282 Project No. : 1811C002 Equipment : Wireless Mouse Test Model : RZ01-0282 Series Model : RZ01-0282XXXX-XXXX (X can be 0-9 or A-Z) Applicant : Razer Inc. Address : 201 3rd Street, Suite 900, San Francisco,CA 94103,USA According: : FCC Guidelines for Human Exposure IEEE C95.1 & KDB447498 D01 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FCCP-2-1811C002 Page 1 of 4 Report Version: R01

1. GENERAL SUMMARY Equipment : Wireless Mouse Brand Name : RAZER Test Model : RZ01-0282 Series Model : RZ01-0282XXXX-XXXX (X can be 0-9 or A-Z) Applicant : Razer Inc. Manufacturer : Razer (Asia-Pacific) Pte.,Ltd. Address : 514 Chai Chee Lane, #07-01-06,Singapore 469029 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Date of Test : Nov. 07, 2018 ~ Nov. 28, 2018 Test Sample : Engineering Sample No.: D181110103 Standards : KDB447498 D01 General RF Exposure Guidance v06 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-2-1811C002) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of A2LA according to the ISO/IEC 17025 quality assessment standard and technical standard(s). Table for Filed Antenna Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A SMD N/A 3 Report No.: BTL-FCCP-2-1811C002 Page 2 of 4 Report Version: R01

2. GENERAL CONCULUSION: According to FCC KDB447498 D01, Appendix A, SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison Appendix A - SAR Test Exclusion Thresholds for 100 MHz - 6 GHz and < 50 mm MHz 5 10 15 20 25 30 35 40 45 50 mm 150 39 77 116 155 194 232 271 310 349 387 300 27 55 82 110 137 164 192 219 246 274 450 22 45 67 89 112 134 157 179 201 224 835 16 33 49 66 82 98 115 131 148 164 900 16 32 47 63 79 95 111 126 142 158 SAR Test 1500 12 24 37 49 61 73 86 98 110 122 Exclusion 1900 11 22 33 44 54 65 76 87 98 109 Thresholds (mW) 2450 10 19 29 38 48 57 67 77 86 96 3600 8 16 24 32 40 47 55 63 71 79 5200 7 13 20 26 33 39 46 53 59 66 5400 6 13 19 26 32 39 45 52 58 65 5800 6 12 19 25 31 37 44 50 56 62 Report No.: BTL-FCCP-2-1811C002 Page 3 of 4 Report Version: R01

Maximum measured transmitter power: Max Output Power Max Output Power (mW) Limit (mW) (dBm) 6.12 4.1 10 The Output power including tune up tolerance. The maximum measured output peak power of this EUT is 4.1mW, less than 10mW at 5mm distance. Conclusion: No SAR evaluation required since transmitter power is below FCC threshold. End of Test Report Report No.: BTL-FCCP-2-1811C002 Page 4 of 4 Report Version: R01


Document Created: 2018-12-17 16:59:52
Document Modified: 2018-12-17 16:59:52
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC