MPE

FCC ID: RWO-RC30026701

RF Exposure Info

Download: PDF
FCCID_4014785

FCC RF EXPOSURE REPORT FCC ID: RWO-RC30026701 Project No. : 1807C143 Equipment : Gaming Headset Test Model : RC30-026701 Series Model : N/A Applicant : Razer Inc. Address : 201 3rd Street, Suite 900, San Francisco, CA 94103,USA According: : FCC Guidelines for Human Exposure IEEE C95.1 & KDB447498 D01 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FCCP-2-1807C143 Page 1 of 4

1. CERTIFICATION Equipment :Gaming Headset Brand Name : RAZER Test Model : RC30-026701 Series Model : N/A Applicant : Razer Inc. Manufacturer : Razer (Asia-Pacific) Pte.,Ltd. Address : 514 Chai Chee Lane #07-01~06 Singapore 469029 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Date of Test : Jul. 30, 2018 ~ Aug. 17, 2018 Engineering Sample No.: D180706296 for conducted, D180806855 for Test Sample : radiated. The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-2-1807C143) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). Table for Filed Antenna Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 N/A N/A PIFA N/A 3.92 2 N/A N/A PIFA N/A 3.92 Note: There are two antennas but only one antenna works at a time. Report No.: BTL-FCCP-2-1807C143 Page 2 of 4

2. GENERAL CONCULUSION: According to FCC KDB447498 D01, Appendix A, SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison Appendix A - SAR Test Exclusion Thresholds for 100 MHz - 6 GHz and < 50 mm MHz 5 10 15 20 25 30 35 40 45 50 mm 150 39 77 116 155 194 232 271 310 349 387 300 27 55 82 110 137 164 192 219 246 274 450 22 45 67 89 112 134 157 179 201 224 835 16 33 49 66 82 98 115 131 148 164 900 16 32 47 63 79 95 111 126 142 158 SAR Test 1500 12 24 37 49 61 73 86 98 110 122 Exclusion 1900 11 22 33 44 54 65 76 87 98 109 Thresholds (mW) 2450 10 19 29 38 48 57 67 77 86 96 3600 8 16 24 32 40 47 55 63 71 79 5200 7 13 20 26 33 39 46 53 59 66 5400 6 13 19 26 32 39 45 52 58 65 5800 6 12 19 25 31 37 44 50 56 62 Report No.: BTL-FCCP-2-1807C143 Page 3 of 4

Maximum measured transmitter power: Max OutputPower Max Output Power (mW) Limit (mW) (dBm) 4.63 2.904 10 The maximum measured output peak power of this EUT is 2.904 mW, less than 10mW at 5mm distance. Conclusion: No SAR evaluation required since transmitter power is below FCC threshold. Report No.: BTL-FCCP-2-1807C143 Page 4 of 4


Document Created: 2019-03-24 23:52:01
Document Modified: 2019-03-24 23:52:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC