MPE RF Exposure

FCC ID: RTP-MRLBB1003S

RF Exposure Info

Download: PDF
FCCID_1386983

the wireless lab 6 December 2010 Maximum Permissible Exposure FCC, Part 15 Subpart C §15.407(f) Industry Canada RSS-Gen §5.5 Calculations for Maximum Permissible Exposure Levels Power Density = Pd (mW/cm2) = EIRP/(4πd2) EIRP = P * G * 2 P = Peak output power (mW) G = Antenna numeric gain (numeric) d = Separation distance (cm) Numeric Gain = 10 ^ (G (dBi)/10) Power level reported in the following matrix is the maximum combined power level reported in Section 5.1.3. Maximum antenna gain was used to calculate the Maximum Permissible Exposure distance. Because the EUT belongs to the General Population/Uncontrolled Exposure the limit of power density is 1.0 mW/cm2 Peak Calculated Peak Minimum Numeric Output Safe Freq. Band Antenna Output Separation Gain Power Distance @ (MHz) Gain (dBi) Power Distance (numeric) x2 1mW/cm2 (dBm) (cm) (mW) Limit(cm) 5150 - 5250 7.02 5.04 +13.95 24.83 3.2 20.00 Note: for mobile or fixed location transmitters the minimum separation distance is 20cm, even if calculations indicate the MPE distance to be less. Specification Maximum Permissible Exposure Limits FCC §1.1310 Limit = 1mW / cm2 from 1.310 Table 1 RSS-Gen §5.5 Before equipment certification is granted, the application requirements of RSS-102 shall be met. MiCOM Labs, 440 Boulder Court, Suite 200, Pleasanton, CA 94566 Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com


Document Created: 2010-12-06 13:20:49
Document Modified: 2010-12-06 13:20:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC