USERS MANUAL 2

FCC ID: RTMSV06CAM

Users Manual

Download: PDF
FCCID_690307




SYSTEM OPERATION CONNECTING MORE CAMERAS TO YOUR SYSTEM (MAX. OF 4) When connecting additional cameras to this system, ensure the camera is set to a different channel. Use the Channel Selector button to navigate between channels. AUTO SCANNING — WHEN UTILIZING MORE THAN 1 CAMERA The video security system provides you with the option to automatically scan/switch between four camera locations. If you are utilizing less than four cameras, you can also set the system to scan only within two or three locations. Setting Auto Scan to 2 or 3 camera locations: 1. Press and hold the Auto/Manual button for more than 2 seconds. All four LED lights on the front of the receiver will turn ON. Releasing the Auto/Manual button to remain in the four channel switching option. 2. Continue to press and hold the Auto/Manual button. The Channel 4 LED button will turn off. The system is now set to scan between three camera locations (Channel 1—3). 3. Continue to press and hold the Auto/Manual button. The Channel 3 LED button will now be turned off. The system is now set to scan between two camera locations (Channel 1—2). 4. Continue to press and hold the Auto/Manual button to return to the four camera viewing option (all four LED lights will be illuminated).

SYSTEM OPERATION AUTO AND MANUAL VIEWING OPTIONS This system is preset to the Manual mode. In Auto mode, the LED light will turn ON. To manually view a specific camera location, set the system to Manual and press the Ch. Select key to view the desired camera location. Auto Mode is used when more than 1 camera is connected to the system. Set the Auto/Manual button to Auto Mode in order to have the system automatically rotate between camera locations. SELECTABLE DWELL SETTING Dwell Setting is the time duration between each camera view in the auto sequence mode This system provides you with three selectable dwell options (2, 5 and 10 seconds) when the system is set to Auto Mode. This system is preset to a 2 second selection. Changing Dwell Time 1. Press and hold the CH Select button. The LED button will turn on to indicate thatit is set to 2 seconds. 2. Continue to press and hold the CH Select button. The LED button will flash at a one second interval to indicate that it is now set to the 5 second setting. 3. Continue to press and hold the CH Select button. The LED button will flash three times to indicate it is set to the 10 second setting.

TROUBLESHOOTING If the system does not function properly, check the following points before contacting the service center. Causes & Remedies Problems Camera Receiver/Transmitter No power — AC adapter not plugged in — AC adapter not plugged in {no picture/sound) — Power not turned ON (press — Power switch not turned on and hold the Channel button — TV or Monitor not turned on for 3 seconds) — Improper A/V or coaxial cable connection Poor Reception — AC adapter not plugged in — Adjust antenna direction — Improper channel Picture flickering — Strong spot light in the — Adjust brightness control on field of view TV/monitor Picture too bright — Lighting source in the or too dark field of view Picture rolls and — Adjust antenna direction jumps or scrambled picture

TECHNICAL SPECIFICATIONS WIRELESS CAMERA Image sensor Color CMOS Lens 3.6mm Scanning system 2:1 interlace Scanning frequency 15.734 KHz(H) 59.94H2z (V) Sync. system Internal Negative synchronization Resolution 330 Lines Min. illuminations 3 Lux @ F2.0 (without IR LED) Video Output 1.0Vp—p/75 Ohm Gamma characteristics r=0.45 Auto Iris Electrical Auto Iris Shutter sensitivity :1/60—1/6,000 Microphone Electrronic Condenser Transmitting frequency 2.4 GHz—2.473 GHz (4Ch) Modulation FM Video Output level 1.0Vp—p/75 Ohm Antenna Internal Operating temperature —14° to + 122° F (—10°C to + 50 °C) Power source 9V DC Adapter Dimensions 29x LS5x3.5° Weight 136 grams or 4.8 oz WIRELESS RECEIVER Receiving frequency 2 411GHz — 2.473GHz (4CH) Antenna Dipole antenna Operating temperature —14° to + 122°F or (—10°C to + 50 °C) Power source 9V DC Adapter Dimensions 5.25"(Diameter) x 1.5" (Height) Weight 181 grams or 6.4 Oz

CARE AND MAINTENANCE: Please follow these instructions to ensure proper care and maintenance of this system 2o Keep your monitor and camera dry. If it gets wet, wipe it dry immediately. Use and store your unit in normal temperature environment. Extreme temperatures can shorten the life of the electronic devices. Handle the monitor carefully. Dropping it can cause serious damage to the unit. Occasionally clean the unit with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents to clean the unit. Keep the unit away from excessive dirt and dust. It can cause premature wear of parts. 12

FCC Information This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by Summer infant may void the users authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: lReorient or relocate the receiving antenna l Increase the separation between the equipment and the receiver l Consult the dealer or an experienced radio / TV technician for help.


Document Created: 2019-08-30 01:21:37
Document Modified: 2019-08-30 01:21:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC