USERS MANUAL

FCC ID: RTMSV-01A-CAM

Users Manual

Download: PDF
FCCID_469129

ACCESSORY 2.4 GHz 4 CHANNEL COLOR WIRELESS CAMERA SYSTEM QUICK SET UP GUIDE FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. 1. UNPACK SYSTEM CONTENTS FROM THE GIFTBOX • Wireless Color Camera • Power Adapter • Metal Mounting Bracket and Screws 2. CAMERA CONTROLS & FUNCTIONS BATTERY COMPARTMENT WIRELESS COLOR CAMERA 1. L ENS 5. ST A ND M OUNT ING SOCKET Reinforcement lock for camer a stand. 2. MICROPHONE 6. CHANNEL SEL ECT OR SWITCH Built- in condenser microphone pr ovides Slide sw itch for the channel 1-4 audio capability from c amera to monitor selection. television POWER ADAPTER 7. ON/OFF POWER SWITC H 3. 2.4 GHz ANT ENNA Contr ols pow er to the camera. Note: High gain dir ectional dipole antenna Please ensure you set the sw itch to the sends Audio and Video signals to the OFF position before plugging the monitor. A C adapter into the unit. SLIDE IN 8. DC IN JACK Plug the 9V(300mA) AC Adapter in here. WIRELESS CAMERA – BATTERY OPTION 3. WIRELESS CAMERA – INSTALLATION 1. Attach the stand base to the wall or ceiling where you want to install the camera. Locate a wall stud or ceiling joist and secure bracket using the three supplied screws. 2. Attach the camera to the stand and firmly tighten the swivel.. 3. Attach the camera with the stand to the stand base and firmly tighten the joint knob on the stand base. 4. Connect the supplied 9V 300mA DC adapter to the DC IN jack at the rear of the camera and plug it into the electrical outlet. Your wireless camera has both AC or battery option. When using the AC option with rechargeable batteries, your camera will automatically switch to back up battery feature during a power outage providing you with uninterrupted power to the camera. The battery option also provides you the flexibility to move the camera from room to room. WIRELESS CAMERA - AC OPTION ONLY 1. Ensure the power switch on the camera is turned OFF. 2. Connect one end of the power supply to the DC IN jack located at the back of the camera. Plug the other end into an electrical outlet WIRELESS CAMERA - USING RECHARGEABLE BATTERIES 1. Insert 8 rechargeable ‘AA’ batteries (not included) into the camera battery compartment. WARNING: TO PREVENT INJURY AND/OR DAMAGE TO THE UNIT, ENSURE THE BATTERIES ARE ALIGNED PROPERLY AND BATTERY TYPES ARE NOT MIXED. 2. Ensure the slide switch labeled Recharge/Alkaline is set to the ‘Rechargeable’ setting. 3. Carefully slide the batter compartment into the camera 4. Ensure the power switch on the camera is turned OFF. 5. Connect one end of the power supply to the DC IN Jack located at the back of the camera. Plug the other end into an electrical outlet.

ACCESSORY 2.4 GHz 4 CHANNEL COLOR WIRELESS CAMERA SYSTEM Manual 4. WIRELESS CAMERA - SPECIFICATIONS Image sensor Color CMOS Lens F2.0/f 3.7mm, 92°wide-angle lens Picture element 510 x 492 (Color) Scanning system 2:1 interlace Battery Life (assume 1300mAH) 3 Hours (Color) Current Consumption 300mA typ. (color) Scanning frequency 15.734 KHz(H) 59.9Hz(V) ,EIA Sync. system Internal Synchronization Resolution 380 Lines (Color) Min. illuminations 2 Lux (Color) Video Output 1.0Vp-p/75 Ohm Gamma characteristics r=0.45 Auto Iris Electrical Auto Iris Shutter sensitivity :1/60-1/100,000 Microphone Condenser Transmitting frequency 2.4 GHz-2.4835 GHz Modulation FM RF out level 90dBu/V, 3m Video Input level 1.0Vp-p/75 Ohm Audio input level 2.0Vp-p/600 Ohm Antenna Directional high dipole antenna Oper. temperature -14º to + 122º F or (-10ºC to + 50 ºC) Power source DC12V 500mA DC Adapter Dimensions 7.3 (W) x4.7 (H) x 11(D) cm or 2.8’ (W) x 1.85’ (H) x 4.3’ (D) Weight 118 grams or 3.79 Oz


Document Created: 2004-09-14 11:31:09
Document Modified: 2004-09-14 11:31:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC