User Manual

FCC ID: RSE-TG1700DACHP

Users Manual

Download: PDF
FCCID_3249930

MediaAccess TG1700(d)ac Smart Wireless .11ac Integrated GPON Gateway with Voice TELECOM DATA VOICE VIDEO On the Edge with Gigabit Speeds The Technicolor TG1700(d)ac is a high-speed Gigabit Passive Optical Features at a Glance Network (GPON) triple-play gateway taking advantage of the latest developments in Fiber To The Home (FTTH), while at the same time ■ Integrated 2.5/1.25 Gbps GPON port guaranteeing the highest quality of service. With this gateway, operators ■ 4 GE LAN ports can provide their customers a seamless experience of broadcast television, ■ Dual band concurrent Wi-Fi interfaces: interactive video and very high speed data and telephony services. IEEE 802.11n 2.4 GHz (2x2) with high power (optional) IEEE 802.11ac 5 GHz (3x3) Next-Gen Wireless Technology ■ CATV port for downstream RF video overlay video (optional) ■ 2 FXS ports for phone or fax for Next-Gen Speeds ■ 2 USB 2.0 master ports for hard disk, printer, 3G adapter, … The TG1700(d)ac is one of the irst dual band concurrent Wi-Fi ultra ■ Seamless media sharing (UPnP A/V™ and DLNA®) broadband gateways to feature the next-generation IEEE 802.11ac wireless ■ Future-proof full service platform supporting: standard for the 5 GHz band. With its optimized antenna coniguration, Qeo communication framework and apps this enhanced wireless solution enables even higher throughput and better OSGi execution environment coverage over the much less crowded 5 GHz radio, for real-time content ■ Extensive remote management delivery. Simultaneously, it guarantees uninterrupted transmission of data ■ Non-service-afecting platform software upgrades services over IEEE 802.11n using the 2.4 GHz band. (dual bank memory) ■ IPv4 & IPv6 enabled ■ Designed according to the latest ECO standards AV RoHS COMPLIANT

MediaAccess TG1700(d)ac Smart Wireless .11ac Integrated GPON Gateway with Voice OLT Agnostic GPON Gateway High Speed Network Connectivity Built upon our extensive experience in DSL gateway development and By integrating the ONT in the gateway and by using an integrated GPON deployment, the TG1700(d)ac interoperates seamlessly with diferent interface, the TG1700(d)ac can reach lightning fast speeds, allowing Optical Line Terminations (OLTs) in the ield. By keeping a lexible software operators to respond to the increasing end-user demand for higher track on the TG1700(d)ac, we can detect the OLT and reconigure the bandwidths. gateway dynamically to ensure full compatibility between both. As such, To beneit from these extreme WAN speeds the gateway implements there is no need for any irmware upgrades or restart in order to be able to a Gigabit Ethernet (GE) router, providing very high speed connectivity cover deployments with multiple OLTs, even if from diferent vendors. between LAN devices and the network. It also includes a dual band Moreover, the TG1700(d)ac supports standard G.984.4 OMCI features concurrent Wi-Fi base station with IEEE 802.11n and IEEE 802.11ac and implements some proprietary vendor speciic Management capabilities to stream data, including rich media content, anywhere in the Information Base (MIB), Managed Entities (MEs) and Alarms (MAs). home. Furthermore, the device can be maintained and upgraded using the The integration of the GPON ONT in a service gateway guarantees a lower TR-069 protocol. installation and operation cost. Thanks to its innovative mechanical solution, the installation becomes as easy as any other ixed line service gateway installation. On top of this high-speed down- and upload, the TG1700(d)ac has an optional downstream RF Video overlay connection. It enables Network Service Providers (NSPs) to use their existing iber infrastructure to get a TV signal to the home without the need for deploying additional coax. This results in substantial cost savings and a irst-class robust quality of service, ensuring linear television channel distribution to the home, without impacting video on demand and other interactive services. GPON RF overlay 1550 nm ONT Data 2.488 Gbps OLT WDM (1490 nm) Splitter Voice IP Video Downstream ONT Data Voice Upstream TG1700(d)ac (1550 nm) 1.244 Gbps IP Video (1310 nm) ONT CATV Analog Video (optional)

MediaAccess TG1700(d)ac Smart Wireless .11ac Integrated GPON Gateway with Voice Flexible & Future-Proof Software Stack Voice over IP The TG1700(d)ac is enriched with Technicolor Homeware, a reliable and The TG1700(d)ac ofers VoIP functions for residential and business users. managed middleware for gateways that speaks Qeo (www.i-speak-qeo. POTS phone connectors are provided to accommodate regular phones and com) to open up the connected home and deliver an unlimited spectrum of faxes. Once the gateway is registered with a VoIP service, regular phone value added services and applications. calls can be conducted over the Internet with all the beneits of IP telephony. Featuring a platform agnostic architecture, Technicolor Homeware is a On top of a wide range of advanced voice services like caller ID, CLIR, fully portable solution that ensures the fastest time to market. Moreover, call waiting, call forwarding, three-way conference and message waiting its modularity and enhanced life cycle management make it easy to add or notiication, the TG1700(d)ac is completely interoperable with the main IMS remove components to or from a software release, while enabling second & cores in the market. third party development. Leveraging open source, Technicolor Homeware embraces diferent Media Sharing execution environments and supports current and emerging trends, transforming the gateway into a full-blown app platform. The TG1700(d)ac acts as a fully compliant DLNA 1.5 Digital Media Server (DMS) and enables distribution of all content from any device to any device in the home. You can stream music, data, pictures and video from your “I speak Qeo” gateway to devices connected to your wired or wireless home network. The TG1700(d)ac has been developed to run Qeo, Technicolor’s open, In addition, the TG1700(d)ac supports hot plugging of USB hard disk drives, agile and distributed communication framework that addresses the issue allowing you to simply plug and play devices without the need to switch the of disparate ecosystems used for device interaction. With Qeo, you can gateway of irst. seamlessly bridge all your connected devices, applications and over-the-top cloud solutions, regardless of brand or ecosystem. As a universal software language, it lets you create totally new use cases for the connected life and ECO the “Internet of Things” (IoT). Technicolor is committed to ofer its customers sustainable products and Qeo also includes tools to monitor and manage all Qeo enabled devices, implements a set of ECO features to reach the best possible environmental helping you keep operational costs under control. performance. In addition to carefully selected plastics and packaging to minimize the ecological footprint, the TG1700(d)ac beneits from a To learn more about Qeo, visit: www.i-speak-qeo.com unique combination of hardware and software features that reduce power consumption substantially. IPv6 Enabled With the approaching IPv4 address pool depletion, our products need to Professional Services be ready for IPv6. Technicolor is a frontrunner in the introduction of IPv6 To reinforce our extensive portfolio of digital home solutions, Technicolor has on its devices, with the TG1700(d)ac being enabled for multiple IPv6 ield a dedicated Professional Services team to make sure that every deployment scenarios. Internet Protocol version 6 is the next generation of Internet is a success, from initial provisioning and integration to operations, upgrades, technologies aiming to efectively support the ever-expanding Internet ongoing support and beyond. usage and functionality, and also to address security concerns that exist in an IPv4 environment. Our wide array of services spans the entire customer project lifecycle, encompassing: Technicolor aims to introduce IPv6 as smoothly as possible in customer networks. By providing in-depth knowledge of the networking stack, we ■ Expert consulting guide our customers in their transition from IPv4 to IPv6. ■ Seamless system integration ■ Warranty on all our products ■ Qualiied technical support and maintenance ■ Eicient repair, refurbishment and recycling

MediaAccess TG1700(d)ac Smart Wireless .11ac Integrated GPON Gateway with Voice Technical Specifications Hardware Specifications Wireless Specifications ■ Interfaces WAN 1 GPON port (SC/APC) ■ Full dual band concurrent Wi-Fi access points, Wi-Fi certiied® ■ Interfaces LAN 4-port autosensing 10/100/1000 Base-T 2.4 GHz (2x2) IEEE 802.11n AP auto-MDI/MDI-X Ethernet LAN switch 5.0 GHz (3x3) IEEE 802.11ac AP 1 CAT-RF port (optional) with IEEE 802.11ac compliant transmit 2 FXS POTS ports beamforming 2 USB 2.0 master ports ■ Wi-Fi 2.4 GHz power Standard: Up to 20dBm (100mW EIRP) IEEE 802.11n 2.4 GHz on-board High Power (optional): Up to 24dBm (250mW EIRP) IEEE 802.11ac 5.0 GHz on-board ■ Wi-Fi Protected Setup (WPS™) ■ Interfaces other Power button ■ Wi-Fi security levels WPA2™-Enterprise / WPA™-Enterprise Info button WPA2™-Personal / WPA™-Personal WPS button WEP™ Wi-Fi on/of button ■ Wi-Fi Multimedia (WMM®) Reset button ■ Up to 4 BSSIDs (virtual AP) support per radio interface ■ Dimensions 228.5 x 182.5 x 39.5 mm (9.0 x 7.2 x 1.6 in) ■ RX/TX switched diversity ■ AC Voltage 100 - 240 VAC (switched mode power supply) ■ 2x2 MIMO 2.4 GHz Wi-Fi features ■ Temperature 0° - 40° C (32° - 104° F) SGi ■ Humidity 20 % to 80 % STBC 20/40 MHz coexistence GPON Interface Specifications ■ 3x3 MIMO 5.0 GHz Wi-Fi features SGi ■ Standards ITU-T G984.1 STBC ITU-T G984.2 20/40/80 MHz mode ITU-T G984.3 ■ Dynamic rates switching for optimal wireless rates ITU-T G984.4 ■ Manual/auto radio channel selection ITU-T G.988 ■ Fiber type ITU-T G.652 ■ Up to 8 T-CONTs and 32 GEM ports Management ■ Upstream and downstream FEC ■ Customizable user-friendly GUI via HTTP and HTTPS ■ Downstream AES encryption ■ Web services API for remote access ■ Downstream rate 2.488 Gb/s (portal, management, diagnostics, applications, ...) ■ Upstream rate 1.244 Gb/s ■ TR-069 CPE WAN Management Protocol (CWMP) ■ Upstream wavelength 1260 - 1360 nm TR-098 Internet Gateway Device Management ■ Downstream wavelength 1480 - 1500 nm TR-181i2 Device:2 data model ■ Connector type SC-APC TR-157a3 Life Cycle Management (LCM) ■ Attenuation range Class B+ (28 dB optical budget) TR-143 network throughput performance tests ■ Maximum diferential range and statistical monitoring 20 km TR-104 voice service provisioning and coniguration ■ GPON Dying Gasp TR-111 home network device management TR-140 storage service provisioning CATV-RF Interface Specifications (optional) ■ ONT Management and Control Interface (OMCI) management ■ Zero-touch autoprovisioning ■ Band 42 - 870 MHz ■ Downstream wavelength 1550 - 1560 nm ■ Average received optical power (OMI = 3.4% / carrier) -7 to 1 dBm ■ Output power of CATV-RF channel 14.5 to 22 dBmV (550 MHz) ■ CSO distortion -55 dBc (maximum) ■ CTB distortion -59 dBc (maximum) ■ Carrier / Noise Ratio (CNR) 52 dB (typical)

MediaAccess TG1700(d)ac Smart Wireless .11ac Integrated GPON Gateway with Voice Technical Specifications Services IPv6 Networking ■ Support of Qeo communication framework and apps, including access to real time ■ IPv4 / IPv6 dual IP stack diagnostics ■ Supported models: PPP(oE) – IPoE ■ Life Cycle Management (LCM) ■ Transitioning 6rd/6to4/6in4 for developing advanced services support DSLite ■ Open architecture for 3rd party application and UI development ■ Stateful connection tracking / stateful inspection irewall ■ 3G mobile fall-back WAN connection (through 3G USB adapter) ■ DHCPv6 Stateful/stateless DHCPv6 client ■ Parental control URL- and (optional) content-based website iltering Stateless DHCPv6 server Time-based access control Relay ■ Printer sharing Preix Delegation ■ Content sharing Samba ile server ■ DNS v4/v6 Proxy UPnP A/V™ media server and control point ■ ULA DLNA® DMS ■ ICMPv6 Metadata support ■ IPv6 Quality of Service Remote HDD ile access ■ MLDv1/v2 ■ HDD ile systems FAT32, NTFS, EXT2, EXT3, HFS+ Quality of Service Security ■ GPON QoS ■ Stateful Packet Inspection Firewall (SPIF) ■ IP QoS Flexible classiication (ALG aided) ■ Customizable irewall security levels IP rate limiting (two-rate remarking/dropping) ■ Intrusion detection and prevention (DoS, SYN Flood, Ping of Death, Fraggle, DSCP (re) marking LAND, Teardrop, etc.) TCP ACK optimization ■ DeMilitarized Zone (DMZ) Dynamic link fragmentation ■ Multilevel access policy Per service class connection/resource reservation ■ Security and service segregation per SSID ■ Ethernet QoS Priority or C-VLAN/S-VLAN tagging Switch port queuing and scheduling Networking ■ Wireless QoS WMM (BE, BK, VI, VO access categories) queuing and scheduling ■ Symmetrical NAT with application helpers (ALGs) ■ Game and application sharing NAT port maps ■ DHCP conditional serving & relay, DNS server & relay ■ IGMPv3 proxy (Fastleave) ■ IGMP snooping (full routed) ■ DHCP spooing ■ IEEE 802.1q VLAN bridging, multiple bridge instances ■ Multicast to unicast translation on Wi-Fi interfaces

MediaAccess TG1700(d)ac Smart Wireless .11ac Integrated GPON Gateway with Voice Technical Specifications Telephony Environmental Features ■ Voice technologies Voice over IP (VoIP) ■ Wi-Fi on/of function ■ Voice signalling SIP ■ LED on/of function ■ Voice codecs G.711, G.726, G.729 Wideband T.38 G.722.2 (optional) Content of the Box ■ Echo cancellation G.168 compliant ■ Smart Wireless .11ac Integrated GPON Gateway with Voice ■ Comfort Noise Generator (CNG) ■ Ethernet cable (RJ-45) ■ Voice Activity Detection (VAD) ■ Power supply unit ■ Flexible telephone number per FXS handset ■ Quick Setup lealet(s) (optional) including common numbers ■ Safety Instructions & Regulatory Information booklet (optional) ■ Supplementary and advanced services Caller ID Call waiting (on call basis) Call forwarding (no answer/busy/unconditional) Call transferring Call hold, call return Calling Line Identiication Presentation (CLIP) Calling Line Identiication Restriction (CLIR) Calling Name Identiication Presentation (CNIP) Calling Name Identiication Restriction (CNIR) Fax transparency / V.92 transparency 3-way conference Message Waiting Indicator (MWI) Warm line Call completion to busy subscriber Abbreviated number Anonymous Call Rejection (ACR) Distinctive ringing Support for secondary outbound proxy DNS NAPTR, DNS SRV ■ Interoperable with main market softswitches TG1700(d)ac back panel TECHNICOLOR WORLDWIDE HEADQUARTERS SALES CONTACT 1, rue Jeanne d’Arc For more information please get in touch with your usual 92443 Issy-les-Moulineaux France sales representative or use the following email: © Copyright 2014 Technicolor. All rights reserved. Photos and speciications are subject to change without Tel: +33 (0)1 41 86 50 00 - Fax: +33 (0)1 41 86 58 59 EMEASalescontact@technicolor.com notice. All trade names referenced are service marks, APACSalescontact@technicolor.com trademarks, or registered trademarks of their respective www.technicolor.com companies. NAMSalescontact@technicolor.com DMS-DAT-20131031-0000 v1.0 LATAMSalescontact@technicolor.com DS-262-v01-1402

SAFETY INSTRUCTIONS AND REGULATORY NOTICES BEFORE YOU START INSTALLATION OF • Disseminate performance information or OR USE THIS PRODUCT, CAREFULLY analysis (including, without limitation, READ THESE INSTRUCTIONS benchmarks) from any source relating to the When using this product, always follow equipment. the basic safety precautions to reduce the Such acts not expressly approved by Technicolor ! risk of fire, electric shock and injury to will result in the loss of product warranty and may persons, including the following: invalidate the user's authority to operate this • Always install the product as described equipment. Technicolor disclaims all responsibility in the documentation that is included in the event of use that does not comply with the with your product. present instructions. • Avoid using this product during an Open Source Software notification electrical storm. There may be a This product may contain certain open source remote risk of electric shock from software modules which are subject to Open lightning. Source Software license terms. A list of the Open • Do not use this product to report a gas Source Software used by or provided under this leak in the vicinity of the leak. product release and their corresponding Licenses and version number are available on Technicolor's Applicability website at the following address: These Safety Instructions and Regulatory Notices www.technicolor.com/en/hi/minisites/open- apply to: software or at another address as Technicolor may • Technicolor xDSL Modems & Gateways provide from time to time. Directive If and where applicable, depending on the terms of the applicable Open Source Software licenses, Unless express and prior approval by Technicolor the source codes of the Open Source Software in writing, you may not: are available for free on Technicolor's website at • Disassemble, de-compile, reverse engineer, the following address: www.technicolor.com/en/ trace or otherwise analyze the equipment, its hi/minisites/open-software. content, operation, or functionality, or otherwise For avoidance of doubt, Open Source Software is attempt to derive source code (or the only licensed by the original owner of the Open underlying ideas, algorithms, structure or Source Software under the terms set forth in the organization) from the equipment, or from any designated Open Source License. other information provided by Technicolor, except to the extent that this restriction is Safety instructions expressly prohibited by local law; • Read these instructions. • Copy, rent, loan, re-sell, sub-license, or ! • Keep these instructions. otherwise transfer or distribute the equipment • Heed all warnings. to others; • Follow all instructions. • Modify, adapt or create a derivative work of the equipment; • Remove from any copies of the equipment any product identification, copyright or other notices; *DSL3687400B* DSL3687400B TECHNICOLOR 1-5 rue Jeanne d’Arc Copyright 2016 Technicolor. All rights reserved. 92130 Issy-les-Moulineaux All tradenames referenced are service marks, trademarks, or registered trademarks of their France respective companies. Specifications subject to change without notice. www.technicolor.com DMS-SAF-20101221-0001 v3.0.

Climatic conditions • This power supply unit must be Class II and a This product: Limited Power Source in accordance with the • Is intended for in-house stationary use; the requirements of IEC60950-1/EN60950-1, maximum ambient temperature must not Clause 2.5 and rated as indicated on the label exceed 40 °C (104 °F); the relative humidity on your product. It must be tested and must be between 20% and 80%. approved to national, or local standards. • Must not be mounted in a location exposed to • For US and Canada: This product is intended to direct or excessive solar and/or heat radiation. be supplied by a UL listed Direct Plug-in Power • Must not be exposed to heat trap conditions Unit marked "Class 2" and rated as indicated on and must not be subjected to water or the label on your product. condensation. Only use the power supply unit that is supplied • Must be installed in a Pollution Degree 2 with this product. The use of other types of environment (environment where there is no supplies is prohibited. If you are not sure of the pollution or only dry, nonconductive pollution). type of power supply needed, consult the Ventilation and positioning product's user documentation or contact your • Do not block or cover any ventilation openings; local product dealer. never stand it on soft furnishings or carpets. Accessibility • Never push objects through the openings in The plug on the power supply cord or power this product. supply unit serves as disconnect device. Be sure • Leave 7 to 10 cm (3 to 4 inches) around the that the mains supply socket outlet you use is product to ensure that proper ventilation gets easily accessible and located as close to the to it. product as possible. • Do not install the product near any heat sources Overloading such as radiators, heat registers, stoves, or other Do not overload mains supply socket outlets and apparatus (including amplifiers) that produce extension power cords as this increases the risk of heat. fire or electric shock. • Do not put anything on it which might spill or Telephone cable drip into it (for example, lighted candles or CAUTION containers of liquids). Do not expose it to To reduce the risk of fire, use only No 26 dripping or splashing, rain or moisture. If a liquid ! AWG wire size or larger enters inside the product, or if the product has telecommunication line cord. been exposed to rain or moisture, unplug it immediately and contact the Customer Connect the telecommunication line cord only in Service. the PSTN, FXO, DSL or Line port of the product. Never plug the telecommunication line cord in Cleaning another receptacle of the product. Unplug this product from the wall socket and Follow the installation instructions in the computer before cleaning. Do not use liquid sequence as outlined in the installation guide. cleaners or aerosol cleaners. Use a damp cloth for Servicing cleaning. To reduce the risk of electric shock, do not Water and moisture disassemble this product. None of its internal Do not use this product near water, for example parts are user-replaceable; therefore, there is no near a bathtub, washbowl, kitchen sink, laundry reason to access the interior. Opening or tub, in a wet basement or near a swimming pool. removing covers may expose you to dangerous Transition of the product from a cold environment voltages. Incorrect reassembly could cause to a hot one may cause condensation on some of electric shock if the appliance is subsequently its internal parts. Allow it to dry by itself before re- used. starting the product. If service or repair work is required, take it to a Electrical powering qualified service dealer. The powering of the product must adhere to the Damage requiring service power specifications indicated on the marking Unplug this product from the mains supply socket labels. outlet and refer servicing to qualified service In case this product is powered by a power supply personnel under the following conditions: unit: • When the power supply, power cord or its plug are damaged.

• When the attached cords are damaged or device specific constraints or rules that may apply frayed. in the country where you want to use this product. • If liquid has been spilled into the product. In some situations or environments, the use of • If the product has been exposed to rain or wireless devices may be restricted by the water. proprietor of the building or responsible • If the product does not operate normally. representatives of the organization. • If the product has been dropped or damaged in If you are uncertain of the policy that applies on any way. the use of wireless equipment in a specific • There are noticeable signs of overheating. organization or environment (e.g. airports), you • If the product exhibits a distinct change in are encouraged to ask for authorization to use this performance. device prior to turning on the equipment. Immediately disconnect the product if you notice Technicolor is not responsible for any radio or it giving off a smell of burning or smoke. Under no television interference caused by unauthorized circumstances must you open the equipment modification of the device, or the substitution or yourself; you run the risk of electrocution. attachment of connecting cables and equipment Protect the product when moving it other than specified by Technicolor. The Always disconnect the power source when correction of interference caused by such moving the product or connecting or unauthorized modification, substitution or disconnecting cables. attachment will be the responsibility of the user. Interface classifications (upon applicability) Technicolor and its authorized resellers or distributors are not liable for any damage or The external interfaces of the product are violation of government regulations that may classified as follows: arise from failing to comply with these guidelines. • DSL, Line: TNV circuit, subjected to overvoltages (TNV-3) North-America - Canada • Phone, FXS: TNV circuit, not subjected to Notification of Canadian Radio Frequency overvoltages (TNV-2) Interference Statement • PSTN, FXO: TNV circuit, subjected to This Class B digital apparatus complies with overvoltages (TNV-3) Canadian ICES-003. • All other interface ports (e.g. Ethernet, USB, This product meets the applicable Innovation, etc.), including the low voltage power input Science and Economic Development Canada from the AC mains power supply: SELV technical specifications. circuits. NOTICE: The Ringer Equivalence Number WARNING (REN) for this terminal equipment is 0.1. The REN is an indication of the maximum number of ! • The Phone, FXS port will be classified as a TNV-3 circuit when connected devices allowed to be connected to a telephone internally to the PSTN, FXO port, for interface. The termination on an interface may example, when the device is powered consist of any combination of devices subject off. only to the requirement that the sum of the RENs • If the product is equipped with a USB of all the devices does not exceed 5. interface (slave and/or master) or any Canada - Industry Canada (IC) type of connector with metallic In case this product is equipped with a wireless shielding, then it is not allowed to transceiver, this device complies with Industry connect the Phone, FXS port with the Canada’s licence-exempt RSSs. Operation is PSTN, FXO or the DSL, Line port by subject to the following two conditions: (1) This any means, for example with an device may not cause interference; and (2) This external telephone cable. device must accept any interference, including interference that may cause undesired operation Regulatory information of the device. You must install and use this device in strict Canada - Radiation exposure statement accordance with the manufacturer's instructions This equipment complies with IC radiation as described in the user documentation that is exposure limits set forth for an uncontrolled included with your product. environment. This equipment should be installed Before you start installation or use of this product, and operated with minimum distance 20 cm carefully read the contents of this document for (8 inches) between the radiator and your body.

Restricted frequency bands This equipment complies with Part 68 of the FCC In case this product is equipped with a wireless Rules. transceiver operating in the 2.4 GHz band, it may The customer information required for Telephone only use channels 1 to 11 (2412 to 2462 MHz) on Terminal Equipment ("TTE") approved for Canada territory. connection to the Public Switched Telephone In case this product is equipped with a wireless Network ("PSTN"), pursuant to 47 CFR transceiver operating in the 5 GHz band, it is for §68.218(b)(1) can be found at indoor use only. www.technicolor.com. The availability of some specific channels and/or RF exposure statement operational frequency bands are country This equipment complies with FCC radiation dependent and are firmware programmed at the exposure limits set forth for an uncontrolled factory to match the intended destination. The environment. End users must follow the specific firmware setting is not accessible by the end user. operating instructions for satisfying RF exposure North-America - United States of America compliance. To maintain compliance with FCC Federal Communications Commission (FCC) RF exposure compliance requirements, please radio frequency interference statement follow operation instruction as documented in the This equipment has been tested and found to product documentation. comply with the limits for a Class B digital device, When the product is equipped with a wireless pursuant to Part 15 of the FCC Rules. These interface, then it becomes a mobile or fixed limits are designed to provide reasonable mounted modular transmitter and must have a protection against harmful interference in a separation distance of at least 20 cm (8 inches) residential installation. This equipment generates, between the antenna and the body of the user or uses and can radiate radio frequency energy and, nearby persons. In practice, this means that the if not installed and used in accordance with the user or nearby persons must have a distance of at instructions, may cause harmful interference to least 20 cm (8 inches) from the product and must radio communications. However, there is no not lean on the product in case it is wall-mounted. guarantee that interference will not occur in a With a separation distance of 20 cm (8 inches) or particular installation. If this equipment does more, the M(aximum) P(ermissible) E(xposure) cause harmful interference to radio or television limits are well above the potential this wireless reception, which can be determined by turning interface is capable to produce. the equipment off and on, the user is encouraged This transmitter must not be co-located or to try to correct the interference by one or more operating in conjunction with any other antenna of the following measures: or transmitter. • Reorient or relocate the receiving antenna. Restricted frequency bands • Increase the separation between the equipment In case this product is equipped with a wireless and receiver. transceiver operating in the 2.4 GHz band, it may • Connect the equipment into an outlet on a only use channels 1 to 11 (2412 to 2462 MHz) on circuit different from that to which the receiver U.S.A. territory. is connected. In case this product is equipped with a wireless • Consult the dealer or an experienced radio/TV transceiver operating in the 5 GHz band, it meets technician for help. all the other requirements specified in Part 15E, This device complies with Part 15 of the Section 15.407 of the FCC Rules. FCC Rules. Operation is subject to the The availability of some specific channels and/or following two conditions: (1) this device operational frequency bands are country may not cause harmful interference, and dependent and are firmware programmed at the (2) this device must accept any factory to match the intended destination. The interference received, including firmware setting is not accessible by the end user. interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Responsible Party: Technicolor, 101W. 103rd St., Indianapolis, IN 46290 USA, 317-587-5466.

CONSIGNES DE SÉCURITÉ ET INFORMATIONS RÉGLEMENTAIRES AVANT D’INSTALLER OU D’UTILISER LE Ces actes, réalisés sans l'accord explicite de PRODUIT, LISEZ ATTENTIVEMENT CES Technicolor, entraînent la perte de la garantie du INSTRUCTIONS produit et enlèvent à l'utilisateur le droit Afin d’éviter tout risque d’incendie, de d'employer l'équipement. Technicolor rejette choc électrique et de blessure corporelle, toute responsabilité en cas d'utilisation de ! il convient d’utiliser le produit l'équipement non conforme aux présentes conformément aux mesures de sécurité instructions. de base, parmi lesquelles les suivantes : Notice relative aux Logiciels Libres • Respectez toujours les instructions Ce produit logiciel peut contenir des éléments d’installation détaillées dans la (modules ou bibliothèques logiciels) publiés sous documentation accompagnant le licence « Logiciels libres » (« open source »). Ces produit. composants logiciels peuvent être modifiés dans • Évitez de connecter ou d'utiliser ce les prochaines versions logicielles. produit en cas d'orage.La foudre peut Vous trouverez la liste des logiciels libres provoquer un faible risque de choc embarqués dans ce produit logiciel, ainsi que leur électrique. licence et version sur le site Technicolor à l’adresse • N’utilisez pas le produit pour signaler suivante : http://www.technicolor.com/en/hi/ une fuite de gaz à proximité de cette minisites/open-software, ou à toute autre adresse fuite. URL que Technicolor pourrait fournir dans le futur. Applicabilité En fonction des termes et conditions d’utilisation Ces Consignes de sécurité et informations applicables à ces éléments logiciels (les licences réglementaires sont applicables à : de logiciel libre en cause), le code source de ces • Technicolor xDSL Modems & Gateways modules ou bibliothèques logiciels seront mis à Consignes à respecter disposition sur le site de Technicolor, à l’adresse suivante : http://www.technicolor.com/en/hi/ Sauf accord écrit explicite et préalable de minisites/open-software, ou à toute autre adresse Technicolor, vous ne pouvez pas : URL que Technicolor pourrait fournir dans le • démonter, décompiler, décomposer, examiner futur. ou analyser de quelque manière que ce soit En tout état de cause, les logiciels libres sont l'appareil, son contenu, son fonctionnement ou licenciés directement par l’auteur original de ces ses fonctionnalités, ni tenter de copier le code composants logiciels, dans les termes de la source (ou les concepts sous-jacents, les licence de logiciel libre correspondante. algorithmes, la structure ou l'organisation) de l'appareil, ou de toute autre information fournie Consignes de sécurité par Technicolor, sauf si cette restriction est • Lisez ces instructions. expressément interdite par la législation locale; ! • Conservez ces instructions. • copier, louer, prêter, revendre, mettre sous • Respectez tous les avertissements. licence, ni transférer ou distribuer l'appareil à • Suivez toutes les instructions. des tiers; Conditions climatiques • modifier, adapter ou créer un dérivé de Ce produit : l'appareil; • Est conçu pour une utilisation fixe dans un • retirer de l'appareil l'identification du produit, bureau à une température ambiante maximale les droits d'auteur ou toute autre notification; de 40 °C (104 °F); l'humidité relative doit être • diffuser des informations ou analyses relatives comprise entre 20% et 80%. aux performances de l'appareil (y compris et sans restriction, les tests de performance) quelle que soit la source d'information. TECHNICOLOR 1-5 rue Jeanne d’Arc Copyright 2016 Technicolor. Tous droits réservés. 92130 Issy-les-Moulineaux Tous les noms de marque désignent des marques de service, des marques commerciales ou France des marques déposées des sociétés auxquelles elles appartiennent. Les spécifications www.technicolor.com peuvent être modifiées sans préavis. DMS-SAF-20101221-0001 v3.0.

• Ne doit pas être installé dans un endroit exposé • L'alimentation doit être de classe II, être une au rayonnement direct et excessif du soleil et/ source à puissance limitée conformément aux ou à des radiations de chaleur. exigences de la norme CEI60950-1/ EN60950- • Ne doit pas être mis dans des conditions 1, clause 2.5, aux caractéristiques nominales d'accumulation de chaleur et ne doit pas être comme indiquées sur l’étiquette fixée sur le soumis à l'humidité ou la condensation. produit. Elle doit être testée et répondre aux • Doit être installé dans un environnement normes nationales ou locales. présentant un degré de pollution 2 • Pour États-Unis et Canada : Ce produit est (environnement exempt de pollution ou avec destiné à être alimenté par une source une pollution sèche, non conductrice). d'alimentation directe certifiée UL de «Classe Ventilation et positionnement 2» et considéré comme indiqué sur l'étiquette • Ne pas obstruer les ouvertures de ventilation; de votre produit. ne jamais se tenir sur des tissus d'ameublement Utilisez uniquement le bloc d'alimentation livré et les tapis. avec votre produit. L'utilisation d'autres types de • Ne jamais pousser des objets dans les sources d'énergie est interdite. Si vous n'êtes pas ouvertures de ce produit. certain du type d'alimentation nécessaire, veuillez • Laisser 7 à 10 cm (3 à 4 pouces) autour du consulter la documentation fournie avec le produit afin d'assurer une bonne ventilation. produit ou contacter votre revendeur local. • Ne pas installer le produit à proximité de Accessibilité sources de chaleur telles que des radiateurs, L'alimentation électrique est un moyen de poêles ou autres appareils (y compris les déconnecter ce produit. Assurez-vous donc que amplificateurs) qui produisent de la chaleur. le socle de la prise dans laquelle vous branchez le • Ne mettez rien sur lui qui pourrait renverser ou cordon d'alimentation est facilement accessible, goutte à goutte dans le (par exemple, des et est située le plus près possible de l'équipement. bougies ou des contenants de liquides Surcharge allumée). Ne pas l'exposer à des gouttes ou des Ne surchargez pas les socles des prises du réseau éclaboussures, de la pluie ou de l'humidité. Si d'alimentation ni les rallonges car ceci augmente un liquide pénètre à l'intérieur du produit, ou si les risques d'incendie et de choc électrique. le produit a été exposé à la pluie ou à l'humidité, Câble téléphonique débranchez-le immédiatement et contactez le ATTENTION service après-vente. Pour réduire les risques d'incendie, Nettoyage ! utilisez uniquement des conducteurs de Débranchez l'appareil de la prise murale et de télécommunications 26 AWG ou de l'ordinateur avant de le nettoyer. N'utilisez pas de section supérieure. détergents liquides ou d'aérosols. Nettoyez-le Connectez uniquement le câble téléphonique avec un chiffon humide. dans la prise PSTN, FXO ou DSL, Line du Eau et humidité produit. Ne le branchez jamais dans une autre N'utilisez pas ce produit à proximité d'une arrivée prise du produit. d'eau, par exemple près d'une baignoire, d'un Suivez la procédure pour connecter les câbles au lavabo, produit en suivant la séquence décrite dans le d'un évier, d'une machine à laver, dans un sous-sol guide d'installation. humide ou près d'une piscine. Le transfert de ce Entretien produit d'un environnement froid vers un Pour réduire les risques de choc électrique, ne environnement chaud peut entraîner l'apparition démontez pas ce produit. Aucune de ses pièces de condensation sur certaines parties internes. internes Laissez l'appareil sécher avant de le remettre en ne peut être remplacée par un non-professionnel; marche. il n'y a dès lors pas de raison de l'ouvrir. Alimentation électrique L'ouverture ou le retrait des couvercles peut vous L'alimentation du produit doit respecter les exposer à des tensions dangereuses. Un spécifications en matière d'alimentation figurant remontage incorrect peut entraîner un choc sur les étiquettes. électrique lors de l’utilisation suivante. Dans le cas où ce produit est alimenté par un bloc Si votre appareil doit être réparé ou révisé, d'alimentation : confiez-le à un distributeur agréé.

Détérioration nécessitant une intervention Avant d’installer ou d’utiliser le produit, lisez Débranchez ce produit de la prise murale et faites attentivement ce document afin de prendre effectuer la réparation par un service après-vente connaissance des restrictions spécifiques à qualifié dans les cas suivants : l’appareil ou des règles en vigueur dans le pays où • Si l'alimentation ou sa fiche sont vous comptez l’utiliser. endommagées. Dans certains environnements ou circonstances, • Si un des câbles fournis est endommagé ou l’emploi de dispositifs sans fil peut être prohibé effiloché. par le propriétaire du bâtiment ou les • Si vous avez renversé du liquide dans le produit. représentants responsables de l’organisation • Si le produit a été exposé à la pluie ou à de concernée. l'eau. En cas de doute quant à la politique s’appliquant à • Si le produit ne fonctionne pas normalement. l’utilisation d’équipements sans fil dans une • Si le produit est tombé ou a été endommagé organisation ou un environnement spécifique (par d'une façon quelconque. exemple dans les aéroports), il est recommandé • S’il y a un signe perceptible de surchauffe. de demander la permission d’utiliser l’appareil • Si le produit présente des variations avant de l’allumer. importantes au niveau des performances. Technicolor n’est pas responsable des Débranchez immédiatement le produit si vous interférences avec les postes de radio ou de remarquez qu'il s'en dégage une odeur de brûlé télévision susceptibles de survenir à la suite d’une ou de la fumée. Vous ne devez en aucun cas modification non autorisée de l’appareil ou du ouvrir l'appareil vous-même car vous risquez remplacement ou de la connexion de câbles et d'être électrocuté. d’équipements non agréés par Technicolor. C’est Classification des interfaces (sur l'applicabilité) par conséquent à l’utilisateur qu’il incombe de Les interfaces externes du produit sont spécifiées remédier aux interférences causées par de telles comme suit : manipulations. • DSL, Line : circuit TRT, sujet à des surtensions Technicolor et ses revendeurs et distributeurs (TRT-3) agréés déclinent toute responsabilité quant aux • Phone, FXS : circuit TRT, non sujet à des dommages ou violation des réglementations surtensions (TRT-2) nationales découlant du non-respect de ces • PSTN, FXO : circuit TRT, sujet à des instructions. surtensions (TRT-3) Amérique du Nord – Canada • Tous les autres ports d'interface (par example, Déclaration Canadienne d’interférence de Ethernet, USB, etc.)y compris l'entrée Fréquence Radio d'alimentation basse tension depuis Cet appareil numérique de Classe B est l'alimentation du réseau : circuits TBTS conforme à la norme canadienne NMB-003. AVERTISSEMENT Le présent produit est conforme aux ! • Le port Phone, FXS sera classifié spécifications techniques applicables comme un circuit TRT-3 lorsqu’il est d'Innovation, Sciences et Développement raccordé en interne au port PSTN, Économique Canada. FXO, par exemple, lorsque le NOTE : L’Indice d’Équivalence de la Sonnerie périphérique est mis hors tension. (IES) de ce produit est 0.1. Le IES sert à indiquer • Si le produit est équipé d’une interface le nombre maximal de terminaux qui peuvent être USB (esclave et/ou maître) ou d’un raccordés à une interface téléphonique. La autre type de connecteur avec un terminaison d'une interface peut consister en une blindage métallique, il est interdit de combinaison quelconque de dispositifs, à la seule relier le port Phone, FXS au port condition que la somme d'indices d'équivalence PSTN, FXO ou au port DSL, Line par de la sonnerie de tous les dispositifs n'excède pas un moyen quelconque, par exemple, à cinq. l’aide d’un câble téléphonique externe. Canada - Industrie Canada (IC) Si le produit est équipé d'un émetteur-récepteur Avis réglementaire sans fil, il est conforme aux CNR d’Industrie L’appareil doit être installé et utilisé en stricte Canada applicables aux appareils radio exempts conformité avec les instructions du fabricant, de licence. L’exploitation est autorisée aux deux énoncées dans la documentation accompagnant conditions suivantes : (1) l’appareil ne doit pas le produit. produire de brouillage; (2) l’appareil doit accepter

tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Canada - Avis radiation énoncées Cet équipement se conforme avec les limites d’exposition aux radiations énoncées pour un environnement incontrôlé. Il doit être installé et opéré avec une distance minimale de 20 cm (8 pouces) entre la source de radiation et votre corps. Bandes de fréquences restreintes Si le produit est équipé d'un émetteur-récepteur sans fil fonctionnant dans la bande des 2.4 GHz, il utilise uniquement les canaux 1 à 11 (2 412 à 2 462 MHz) sur le territoire canadien. Si le produit est équipé d'un émetteur-récepteur sans fil fonctionnant dans la bande des 5 GHz, il peut uniquement être utilisé dans un environnement intérieur. La disponibilité de certains canaux spécifiques et / ou bandes de fréquences de fonctionnement sont en fonction du pays et sont firmware programmé en usine pour correspondre à la destination prévue. Le réglage du firmware n’est pas accessible par l’utilisateur.


Document Created: 2017-12-20 11:05:14
Document Modified: 2017-12-20 11:05:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC