User manual

FCC ID: RSB-SP770

Users Manual

Download: PDF
FCCID_4348950

Bluetooth Speaker with Drum MODEL NO.: SP770 INSTRUCTION MANUAL FCC ID: RSB-SP770 * The picture is only provided for reference. Please refer to the actual unit! SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under license.

Instructions for use Please read all instructions carefully Getting started Remove the unit from the box Remove any packaging from the product Place the packaging inside the box and store for safekeeping In the box Bluetooth Speaker with Drum Kit AC/DC Adaptor Instruction Manual Drum sticks Features ·7 drum pads ·DJ sound effects ·Bluetooth wireless connection functionality ·Speaker lights ·With USB and SD card support ·5 bands equalizer control ·Built in FM radio ·3.5MM aux in jack ·Microphone input ·Guitar input

Product Diagram TOP: VOL- VOL+ REC PLA Y REC STAN DBY G T. IN DRU AU X STYL M STOP CARD E DJ US B/ M IC MODE O .IN DE M M O DE MUSIC.VOL MIC ECHO 62Hz 250 Hz 1KHz 4KHz 16KHz MIC/ GT.VOL

1 MIC.IN Microphone input 2 GT.IN Guitar input 3 STANDBY Switch device into/out of standby mode 4 VOL- Reduce volume of drum effects 5 Drum pad Drum pad (Closed Hi-hat) 6 Drum pad Drum pad (Ride) 7 Drum pad Drum pad (TOM2) 8 Drum pad Drum pad (TOM1) 9 Drum pad Drum pad (Crash cymbal) 10 Drum pad Drum pad (Snare drum) 11 Drum pad Drum pad (Bass drum) 12 VOL+ Increase volume of drum effects 13 SD card port SD card port 14 USB port USB port 15 Aux input Aux input (3.5mm) 16 Start/stop playback 17 MODE Select mode playback made (AUX/Bluetooth/USB/SD/FM) 18 Play next track/channel 19 Vol +- Master volume controller 20 Play previous track//channel 21 Echo +- Microphone echo effect controller 22 MIC/GT +- Microphone/Guitar volume controller 23 STOP Stop demo songs playback 24 Demo Play pre-installed demo songs 25 REC Drum effects record (Up to 800 notes） 26 DJ effects DJ sound effect knob 27 LED display LED display 28 Record light REC light up red during recording 29 Play Play record drum effects 30 DJ MODE DJ sound effects mode select (11 modes) 31 DRUM STYLE Modify drum effect pitch 32 EQUALIZER GRAPHIC Make equalizer settings

1 2 3 1 FM antenna FM antenna 2 Power switch Switch device of/off 3 DC in socket power supply (DC 15V)

INSTRUCTION FOR USE Connecting the power Plug the DC jack of AC/DC adaptor into the DC socket of the unit. Turning on/off the speaker Switch the POWER switch on the rear of the speaker to the ON position to switch the device on. Press the standby button the top panel to turn on/off the unit. Drum effects There are seven drum effect pressure pads on the top of the speaker that you can use to generate various drum effects. ·Press one or more of the seven drum effect pressure pads to generate various Drum effects. ·Press the DRUM STYLE button to select various sound effects for the drum effect pressure pads. ·Press the VOL+ button to increase the volume of the drum effects and the VOL- button to decrease the volume of the drum effects. Record drum effects You can record the drum effects that you create or a drum effect sequence to play it back later from the speaker. Press the REC button to start recording. The REC LED lights up red. Generate the desired drum effects that you want to record. The recording is stored in the party speaker’s internal memory (up to 800 notes). Press the PLAY button to play your recording. The REC LED goes out. Demo songs play/stop You can play the pre-installed demo songs. Press the DEMO button to play demo songs, press again to switch songs. Press the STOP button to stop demo songs. DJ sound effect You can play DJ sound effects. Turn the DJ sound effects knob to have DJ sound effects. Press the DJ MODE button to change DJ sound effects style. Connect Bluetooth audio output device To connect a Bluetooth audio output device (e.g. smart phone or tablet PC), proceed as follows: Switch the speaker on.

·Press the MODE button once or repeatedly until the screen shows ‘bt’ to switch to the Bluetooth mode. The speaker is now in pairing mode. During this time, ‘bt’ flashes on the display. The party speaker attempts to automatically connect itself to the last audio output device connected via Bluetooth. If this is not possible, the speaker sends its device identification via Bluetooth and bt flashes on the screen. ·Switch on the Bluetooth function on your audio output device and enable search mode. On your audio output device select your speaker SYLVANIA SP770 from the list of available devices and link the devices. You may find more information about the Bluetooth function of your playback device in its operating instructions. ·If you are prompted to enter a password, enter 0000. After successful Bluetooth paired, a beep sounds will come up and the ‘bt’ on the screen will be solid. You can control how tracks are played and the volume on your external device and on the party speaker. The functions available when using an audio playback device on the party speaker depend on your external device and the software used. Connecting an external playback device VIA AUX IN You can use the AUX IN connection to connect an external playback device (for example a CD player or MP3 player). ·Switch the party speaker ON. ·Switch on your external device. Plug the end of a 3.5 mm cinch cord (not supplied with the device) into the AUX IN plug on the top of the speaker. ·Connect the other end of the cord to your external device. Switch on your external device. ·Press the MODE button several times until you see AUX in the display. The audio signal from your external device will now be played back. The track playback is controlled via the external device. The volume can be controlled both on your external device and the speaker. Inserting USB memory sticks ·Insert the USB drive into the USB slot on the top of the party speaker. ·It will enter to USB mode, the display will appear on the display. And it will play the songs from the USB immediately. ·Due to the numerous different file systems and file formats, compatibility with the connected memory media cannot be guaranteed. ·Depending on the size of the data medium, it may take some time for the system to be detected. ·The supported file format is MP3/WMA. ·USB sticks up to 32 GB are supported. ·External hard disks are not supported.

Inserting SD memory card Insert the SD memory card into the slot on the top of the party speaker. The card’s contacts show towards the front of the device. Sd will appear in the display. Please note the following when connecting an SD memory card: ·Due to the numerous different memory cards on the market, compatibility with the connected memory media cannot be guaranteed. ·Depending on the size of the data medium, it may take some time for the system to be detected. ·The MP3/WMA file format is supported. ·SD memory cards up to 32 GB are supported. FM function ·Press the MODE button once or several times to select the operating mode you require. The frequency will appear on the display. ·Press and hold the button to search channels automatically. It will store all stations after stop searching. ·Press the or button to next or previous channel. Connect guitar The guitar can be used in any operating mode. To connect the guitar, proceed as follows: ·Insert the connection cord (6.3 mm cinch) for the guitar into the guitar plug GT in. ·Connect the guitar with the connection cord. Use the MIC/GT volume knob to select the desired guitar volume Connecting a microphone ·Insert the cord of the microphone supplied into the MIC plug on the top of the speaker. ·Use the MIC/GT volume knob to select the desired microphone volume. ·Use the MIC ECHO knob to set any desired echo sound effect for the microphone.

DO’S and Don’ts Read the following recommendations before using the speaker. Following these you will be able to enjoy the product for many years. ·Don’t use abrasive cleaning solvents to clean the speaker. ·Do not expose the speaker to extremely high or low temperature as this will short- en the life of electronic devices, distort certain plastic parts. ·Don’t attempt to disassemble the speaker as it may get damaged if you are not professional. ·Do not expose the speaker to heat or fire. Avoid storage in direct sunlight. ·Do not subject the speaker to mechanical shock. ·Do not add any fluids or solids to your speaker. ·Do not use the speaker if it has been damaged in any way, Specifications Bluetooth specification Bluetooth 4.2 Operating distance 10 meter Speaker output 50W Size 402*350*221mm Weight 5.7KG Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate uses and can radiate radio frequency energy and, if, not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ·Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult dealer or an experienced radio/TV technician for help changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including the interference that may cause undesired operation. For service assistance and product information, please call: 1-800-968-9853. Curtis international Ltd. 7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3



Document Created: 2019-06-11 16:33:57
Document Modified: 2019-06-11 16:33:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC