Users Guide

FCC ID: RS2SA10113A

Users Manual

Download: PDF
FCCID_855521

Satellite Radio Receiver · User Guide Model SA10113 Delphi Corporation 1441 West Long Lake Road Troy, Michigan 48098-5090 U.S.A. Customer Service: [1] 877.GO DELPHI www.delphi.com Warning: This manual contains important safety and operating information. MyFi is a registered trademark of Delphi Corporation. Please read, understand, and follow the instructions in this manual. Failure to do Printed on Recycled Paper The XM name, XM2Go, and related logos are registered so could result in personal injury, death, and/or damage to your MyFi receiver, ©2007 Delphi Corporation. All rights reserved. trademarks of XM Satellite Radio Inc. accessories, and/or to your vehicle or other property. DPSS-06-E-062

FCC Statement Table of Contents Please note that the power cable that has been supplied with your device is supplied with permanently attached fer- A Brief History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 rite beads. It is the responsibility of the user to use the About Delphi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 power cable with the ferrite beads. About XM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Let’s Get Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 The user is cautioned that changes or modifications not Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 expressly approved by XM Satellite Radio Inc. can void the Main controls . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 user’s authority to operate this device. Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 8 This device complies with Part 15 of the FCC Rules. Operation is Display screen . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 subject to the following two conditions: (1) This device may not On the flip side . . . . . . . . . . . . . . . . . . . . . . . . . . 9 cause harmful interference, and (2) this device must accept any What’s in the box? . . . . . . . . . . . . . . . . . . . . . . . . 10 interference received, including interference that may cause Setting Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 undesired operation. Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Connecting to a stereo . . . . . . . . . . . . . . . . . . . . . 13 This equipment has been tested and found to comply with the Receiving the XM signal . . . . . . . . . . . . . . . . . . . . 13 limits for a Class B digital device, pursuant to Part 15 of the FCC Activating Your MyFi . . . . . . . . . . . . . . . . . . . . . . . . . 14 Rules. These limits are designed to provide reasonable protection Go Ahead! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 against harmful interference in a residential installation. Listening To XM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Changing channels . . . . . . . . . . . . . . . . . . . . . . . . 15 This equipment generates, uses, and can radiate radio frequency Saving favorite channels into presets. . . . . . . . . . . 16 energy and, if not installed and used in accordance with the Storing song information in memory. . . . . . . . . . . 17 instructions, may cause harmful interference to radio communi- TuneSelect: Always find your favorite songs or cations. However, there is no guarantee that interference will artists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 not occur in a particular installation. If this equipment does MY XM Time-shifting Memory Mode . . . . . . . . . . . . 18 cause harmful interference to radio or television reception, 2go: Store and play back . . . . . . . . . . . . . . . . . . . 18 which can be determined by turning the equipment off and Scheduling a session . . . . . . . . . . . . . . . . . . . . . . . 19 on, the user is encouraged to try to correct the interference by Personalizing Your MyFi. . . . . . . . . . . . . . . . . . . . . . . 20 one or more of the following measures: Adjusting audio. . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - Reorient or relocate the receiving antenna. Changing display information . . . . . . . . . . . . . . . . 21 - Increase the separation between the equipment and the Make your vehicle’s FM radio an XM radio . . . . . . 23 receiver. Stock Ticker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - Connect the equipment into an outlet on a circuit Info Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 different from that to which the receiver is connected. Direct Tune: Select channels faster . . . . . . . . . . . . 25 - Consult the dealer or an experienced radio/TV technician Setting time features. . . . . . . . . . . . . . . . . . . . . . . 25 for help. Skipping channels . . . . . . . . . . . . . . . . . . . . . . . . . 26 Returning to factory defaults. . . . . . . . . . . . . . . . . 26 Important: The FCC and FAA have not certified the Delphi XM Using MyFi At Home . . . . . . . . . . . . . . . . . . . . . . . . . 27 MyFi Satellite Radio Receiver for use in any aircraft (neither Aiming the home antenna . . . . . . . . . . . . . . . . . . 28 portable nor permanent installation). Therefore, Delphi cannot Using MyFi In Your Vehicle . . . . . . . . . . . . . . . . . . . . 29 support this type of application or installation. Audio quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Placing the antenna . . . . . . . . . . . . . . . . . . . . . . . 31 Mounting your MyFi on the dash . . . . . . . . . . . . . 32 This is the safety alert symbol. It is used to alert you to potential Using MyFi On The Go . . . . . . . . . . . . . . . . . . . . . . . 33 personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Signal reception guidelines . . . . . . . . . . . . . . . . . . 34 Other Things You Should Know. . . . . . . . . . . . . . . . . 35 Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Important battery information—please read . . . . . 35 Accessories (sold separately) . . . . . . . . . . . . . . . . . 36 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Contacting Technical Support and Customer Service . 40 Technical information . . . . . . . . . . . . . . . . . . . . . . 40 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Delphi limited consumer warranty . . . . . . . . . . . . . 41 How you (the Customer) can get service . . . . . . . . 42 How state law relates to the warranty. . . . . . . . . . 42

A Brief History About Delphi Ever since XM Satellite Radio signed up its first subscriber Delphi is a worldwide leader in mobile electronics, vehicle in 2001, Delphi and XM have been working constantly components, and audio technology. Delphi created the to create the best satellite radio receiver. We imagined first in-dash car radio in 1936 and continues its strong a radio that works not only in a vehicle, a home, or an tradition of innovation in the audio industry. Now Delphi office, but something you can take with you virtually technology has helped make satellite radio a reality, and anywhere you go. Now we have it: introducing MyFi, Delphi continues to expand its in-vehicle and consumer the world’s first truly portable satellite radio receiver. electronics technologies. With its exciting line of satellite radio products, Delphi offers a broad portfolio of products to answer a wide variety of information and entertainment needs—in the vehicle, home, office, or virtually anywhere. About XM XM is America's number one satellite radio service with more than 7 million subscribers. Broadcasting live daily from studios in Washington, DC, New York City, the With your MyFi, Country Music Hall of Fame in Nashville, Toronto and you can: Montreal, XM's 2007 lineup includes more than 170 digital channels of choice from coast to coast: the most commercial-free music channels, sports, talk, comedy, children's and entertainment programming; and the most advanced traffic and weather information. • listen to live XM programming at XM, the leader in satellite-delivered entertainment and home, in your car, data services for the automobile market through part- and now virtually nerships with General Motors, anywhere outdoors (page 15) Honda, Toyota, Hyundai, Nissan, Subaru, Suzuki and Porsche, is available in more than 140 different vehicle • use the exclusive satellite models for 2007. XM's industry-leading products are radio memory mode available at consumer electronics retailers nationwide. feature “MY XM” For more information about XM hardware, programming to easily save up to and partnerships, please visit http://www.xmradio.com five hours of the most current XM programming for listening at another time or where live signal reception may be limited (page 18) • program your MyFi to store fresh XM programming at a specific time every day (page 19), and per- sonalize it to suit your lifestyle (page 20) *To receive the XM service, you must subscribe to XM. Available in the continental United States and Canada only. Satellite radio reception depends on the ability of the antenna to receive a signal. The signal may not be available in buildings or if obstructed (e.g., by mountains, trees, bridges, etc). 4 5

Let’s Get Started First, some important reminders We know you’re eager to turn on your brand new MyFi Warning: If you use your MyFi in a moving vehicle and listen to XM. Please take a moment to remember or watercraft, keep your eyes on the road or water, and the following: hands on the wheel or controls. Not doing so could result in personal injury, death, and/or damage to your Warning: This manual contains important safety MyFi receiver, accessories, and/or to your vehicle or other and operating information. Please read, understand, property. and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage Caution: Your MyFi is not waterproof. Avoid splashing it to your MyFi receiver, accessories, and/or to your vehicle with liquids and never submerge it. or other property. We’re always concerned for your safety and want you to Caution: Use your MyFi only with the enclosed have the best MyFi experience possible! components or approved accessories. Do not modify wires or other connections in any way; you could cause a malfunction, which could damage your MyFi and will void your warranty. Controls Before you begin, take a moment to familiarize yourself with your MyFi’s controls. Most basic functions can be accessed using the front panel buttons and the dial. More advanced features are accessed using the “menu” button and the dial. MAIN CONTROLS display – backlit high- IR lens – aim resolution LCD display your remote control here power button – press and hold to turn your MyFi on and off 2go button – store up to five hours of XM programming using the “MY XM” Time- dial – rotate to highlight a channel or menu option; push in to shifting Memory Mode make selection, or press and hold for TuneSelect mode button – switch menu button – access advanced features and configuration options between “LIVE” XM and “MY XM” Time-shifting Memory Mode memory button – save and recall song information such as artist and song title arrow buttons – cycle through channel categories volume buttons – raise or lower volume only when headphones (“LIVE”); skip to previous are plugged in or next song (“MY XM”) display button – change the appearance of the display, including access to different modes that display stocks or sports scores preset/direct mute/pause/lock button – press once to mute audio (“LIVE”) or button – select between pause playback (“MY XM”); press and hold to lock or unlock your direct channel entry or MyFi controls up to 30 presets number keys – enter a channel directly or select your favorite presets 6 7

REMOTE CONTROL power button – press to turn your MyFi on and off search button – search by scanning presets mode button – switch between “LIVE” XM and “MY XM” or by scanning all channels Time-shifting Memory Mode 2go button – store up to five channel buttons – preview channels (“LIVE”); preview songs hours of XM programming (“MY XM”) using the “MY XM” Time- shifting Memory Mode menu button – customize options and access advanced features jump button – switch to XM button – select channel or menu option; push and hold to previous channel add artist/song to your TuneSelect list arrow buttons – view pause button – pause “MY XM” playback channel categories (“LIVE”); skip to previous or next volume buttons – raise or lower volume only when headphones song (“MY XM”) are plugged in mute button – mute live XM preset/direct button – switch between display button – change the appearance of the display, including direct channel entry or up access to different modes that display stock quotes and Info Extras to 30 presets such as sports scores number keys – enter a channel directly or select memory button – save and recall song information such as artist your favorite presets and song title DISPLAY SCREEN ON THE FLIP SIDE listening mode – show lock indicator current listening mode (“LIVE” or “MY XM”) alarm indicator battery door belt clip lock latch – push inward to battery level and slide battery door open channel selection charging status mode – direct entry or preset clock reset button headphone banks A, B, jack – your or C ear buds or headphones signal plug in here strength – 0 channel RESE to 3 bars number battery channel name compartment antenna artist jack – for name use with an additional song or program title external info – volume/playback bars, antenna Stock Ticker, and Info Extras XM Radio ID – use this to activate your radio universal connector 8 9

What’s in the box? Your MyFi includes these components: MyFi receiver rechargeable lithium ion belt clip/stand battery headphones vehicle antenna home stand cassette adapter remote control vehicle cradle vehicle power adapter swivel mount (with extra adhesive pad) protective case flush mount cleaning kit home power home antenna adapter audio cable XM SureConnect vent mount 10 11

Setting Up Connecting to a stereo Assembly Plug the AC adapter into an outlet. Connect the home antenna and connect the line out to either your home Insert the battery and assemble your MyFi and its home stereo or powered (PC type) speakers. stand as shown; plug the AC adapter into an outlet. Let the battery charge for at least three hours. 5V DC ANT LINE OUT Connect to stereo Receiving the XM signal Turn your MyFi on by pressing the power button. You should be able to hear channel 1, the XM Preview Channel. If you do not, and the screen displays “NO SIGNAL,” try moving your MyFi’s antenna to another location. Make sure the antenna points south, either Insert battery outdoors or through a window. If the “NO SIGNAL” message persists, refer to “Aiming the home antenna” (page 28). Please read the TIP below the illustration for optional setup and activation procedure information. Important: You will need to fully charge your MyFi battery for at least three hours to have sufficient battery power for portable use. Aim antenna TIP: Establishing a good signal environment in the home Assemble home stand setup is highly desirable, but this is not the only way you can receive the XM signal. As an option, you can refer to “Using MyFi In Your Vehicle” (page 29) and continue this setup and activation process with your MyFi installed in a vehicle. 12 13

Activating Your MyFi Listening To XM Turn the dial to highlight channel 0, and press the dial in Changing channels to select it. You should see an 8-character XM Radio ID 1. Rotate the dial to preview a list of channels. in the display. (The XM Radio ID should also be on your MyFi’s package and under the battery.) Write the ID here: 2. When your desired channel is highlighted, press the dial in to select that channel. -OR- 1. Press the “pre/dir” button until the word “DIRECT” flashes in the display. The XM Radio ID does not use the letters I, O, S, and F. 2. Press the number keys corresponding to a channel number. For channel 8, press “8.” For channel 130, press “1,” then “3,” then “0.” Activate your XM Satellite Radio service by contacting -OR- XM at http://activate.xmradio.com or by calling 1.800.XM.RADIO (1.800.967.2346). You will need the 1. Press the “ ” or “ ” buttons while in “LIVE” mode. XM Radio ID and a major credit card. You will see the channels organized by category. 2. Rotate the dial to highlight a channel. Press the dial in XM will send a signal from the satellites to activate the to select that channel. full channel lineup. Activation normally takes 10 to 15 minutes, but during peak busy periods, you may need to keep your MyFi on for up to an hour to complete the activation process. When you can access the full channel lineup on your MyFi, you’re done! Go Ahead! Rotate the dial to preview a list of channels. When you find one you’re interested in, press the dial in to tune to that channel. 14 15

Saving favorite channels into presets Storing song information in memory Your MyFi can store up to 30 of your favorite channels Ever hear a song and later forget the artist’s name or as presets. The presets are organized into three banks song title? Let your MyFi remember for you. (A, B, or C) that each contain 10 presets. TO STORE A SONG’S INFORMATION IN MEMORY: Press TO SAVE A CHANNEL INTO A PRESET: and release the “mem” button while the song or program is playing. Your MyFi will beep to confirm. 1. Tune to the channel using the dial or by TO RECALL A SONG’S INFORMATION FROM MEMORY: entering the channel Press and hold the “mem” button until your MyFi beeps number. and you see “Memory Recall” in the display. If you have 2. Press the “pre/dir” stored more than one song’s information, you can rotate button until “PRESET the dial to view each entry. A,” “PRESET B,” or “PRESET C” appears in Your MyFi can hold up to 20 entries, after which any the display. new entry replaces the oldest entry in memory. 3. Press and hold a number key to save that channel into that preset. For TuneSelect: Always find your favorite songs example, by pressing and holding the “3” key, you or artists can save channel 45 into the “A-3” preset. Use the “0” key for the tenth preset. If you can’t get enough of a certain artist or song, your MyFi can tell you when it’s being played on any TO RECALL A PRESET: XM channel. 1. Press the “pre/dir” button until “PRESET A,” 1. Press the “menu” button and choose the “PRESET B,” or “PRESET C” appears in the display. “TuneSelect” option. 2. Press the number key corresponding to your desired 2. Choose either “Select by Song” or “Select by Artist.” preset. In the example, press the “3” key and your “Select by Song” finds a song or program by its title; MyFi should tune to channel 45. “Select by Artist” searches using the artist’s name. You can use the preset banks to organize your channels 3. When you hear one of your favorite songs or artists, in different ways. You might want to store your favorite press in and hold the dial. Your MyFi will beep and channels in bank A, and someone else’s favorite channels flash “Song Selected” or “Artist Selected” on the in bank B. Or store music channels in one bank, news display. This signals that your chosen song title or and talk channels in another. artist name is saved in the TuneSelect list. The list holds up to 20 entries (either artist names or song titles); when the list is full, any new entry replaces the oldest song title or artist in the list. 4. When any song or artist on the list is currently playing on any other XM channel, your MyFi will beep and flash “Artist/Song Found” on the screen. Switch to that channel by pressing in the dial. 5. You may erase individual song titles or artists from the list, or all the songs and artists. Using the “menu” button and dial, choose the “TuneSelect” option and then select either “Erase All” or “Erase Some.” Follow the instructions on your MyFi’s display. 16 17

MY XM Time-shifting Memory Mode Scheduling a session 2go: Store and play back You can set your MyFi to store XM programming at a specific time using the “MY XM” Time-shifting Memory Your MyFi lets you store up to five hours of programming Mode. and play it back at a later time or where live signal reception is limited. Listen to XM wherever you are, 1. Press the “menu” button and use the dial to select whenever you prefer. “MY XM.” 2. Select “Schedule MY XM.” TO STORE BY PRESSING 3. You can schedule up to two sessions. Choose ONE BUTTON: “Session 1” or “Session 2.” 1. Turn on your MyFi and select 4. Rotate the dial to change and press the dial in to fill a channel. in the “How Often?,” starting time, ending time, and 2. Press the “2go” button. To channel fields. The “How Often?” option allows you prevent you from accidentally to activate the session “Once,” “Every Day,” or “Off” recording over a previously (postponing until another time). stored program, your MyFi will ask you to confirm. Press TIP: You can use the number buttons to enter the the “2go” button again. The channel number. You can also use the up, down, center of the top line of your and XM buttons on the remote to enter time and MyFi’s screen switches from make selections. “LIVE” to “REC.” 5. Set up the second TIP: Press and hold the “2go” button and you can session, if you desire. automatically bypass the second confirmation “2go” The combined time button press. for both sessions should not exceed five 3. To stop storing and continue with live programming, hours in one day and press the “2go” button again. The display reverts to the sessions may not “LIVE” mode. overlap each other. Your MyFi will advise TO PLAY BACK: you if either condition occurs, and will give you another chance to schedule the sessions. 1. Press the ”mode” button. Your MyFi switches from “LIVE” to 6. Press the “menu” button. “MY XM” and will begin to play 7. Turn off your MyFi. When the session starts, the back from the beginning or display will show “Session 1 (or 2) Recording.” If your where you last stopped or MyFi is already on when the session is supposed to paused. start, MyFi skips the session and does not interrupt 2. “MY XM” holds up to five your listening. When the session starts, it writes over hours of programming. Press the oldest stored programs first, ensuring that you’re either the “ ” or “ ” button always listening to the freshest programming. to skip to the previous or to the next song. Important: You can only store a session if your MyFi is turned off and plugged into the home stand, with the 3. You can also rotate the dial to AC adapter connected and receiving power. You must view a list of the stored artists connect the home antenna to receive the XM signal. and songs. Simply highlight an artist with the dial, then press the dial in to listen to it. TIP: If you set the alarm to turn on your MyFi before a 4. To return to LIVE listening, press the “mode” button session is scheduled to start, that session could be can- again. celled if the MyFi is on and not off to begin the session. 8. To erase the stored content, choose the “Clear MY XM” option under the “MY XM” menu. All previously recorded content can no longer be accessed. 18 19

Personalizing Your MyFi TO CHANGE THE AUDIO LEVEL of the cassette adapter, FM transmitter, or line-level audio output: You can easily adapt your MyFi to the way you listen and use the satellite radio. You can change how the display 1. Press the “menu” button and use the dial to select appears, track stocks and other information, adjust your “Set Audio.” MyFi’s audio output, and change how you use the display. 2. Select “Line Out Level.” Your MyFi can detect when you’re using the FM transmitter or cassette adapter and Simply press the “menu” button, rotate the dial to high- will make the appropriate changes to the settings. light an option, and press the dial in to select. Your MyFi 3. Rotate the dial to change the audio level. Push the guides you with instructions right on the screen. dial in to confirm. If you ever get lost or decide not to change anything, 4. When you’re done, press the “menu” button until press the “menu” button to return to normal operation. you return to normal operation. Or wait for about 15 seconds and your MyFi reverts by itself. Changing display information Adjusting audio TO DISPLAY DIFFERENT INFORMATION ON THE SCREEN, You can ADJUST THE BASS OR TREBLE, which affects press the “display” button to cycle through these both the headphones and audio outputs of the home options: stand and vehicle cradle. 1. Press the “menu” button and use the dial to select “Set Audio.” 2. Select “Set Tone.” 3. Rotate the dial to high- light either “Bass” or “Treble.” Press the dial Primary display format Stock Ticker format in to select. 4. Rotate the dial to change the bass or treble level. Press the dial in to confirm. 5. When you’re done, press the “menu” button until you return to normal operation. Caution: Before putting on the headset, always adjust Info Extras format Scrolling text format the volume setting at the lowest level to avoid possible hearing damage. 20 21

TO CHANGE THE APPEARANCE OF THE SCREEN, press the Make your vehicle’s FM radio an XM radio “menu” button and select “Change Display.” You can Your MyFi contains a built-in FM transmitter that sends change the brightness and contrast, set how long the the XM audio signal to your vehicle’s FM radio. You can backlight remains on, flip the screen between positive use the FM modulator in your vehicle cradle only. (black characters on white background) or negative (white characters on black background) modes, and set the way You will first need to determine if your installation will the Stock Ticker and Info Extras appear on the screen. require the use of the FM modulator or the use of the cassette adapter. If your vehicle’s radio does not have a cassette player, you will need to use either the Professional installed FM Direct Adapter (sold separately) or the self install XM SureConnect method of installa- tion. Please read the XM SureConnect installation guide before installing. 1. Turn on your vehicle’s FM radio and turn off your MyFi. Unplug any headphone or audio cable from your MyFi’s headphone jack and any audio cables connected to the vehicle cradle. 2. You need to find an FM frequency that is not being used by any commercial FM station. Tune your FM radio to the following frequencies: 88.1, 88.3, 88.5, 88.7, 88.9, 106.7, 106.9, 107.1, 107.3, 107.5, 107.7, and 107.9. Note which frequency has no FM station or the least amount of interference. 3. Turn on your MyFi. 4. Using the “menu” button and the dial, select “Set FM Frequency.” 5. Rotate the dial to highlight the FM frequency you found in step 2. Press the dial in to select that frequency. 6. You should now hear XM programming on your FM radio. If the sound isn’t clear or you hear noise or static, try another FM frequency. If you’re traveling, you may need to retune periodically; this is due to the differences in signal strength of local FM stations and is not a problem associated with your MyFi. TIP: When you plug a cassette adapter into your head- phone jack, your MyFi automatically turns off the FM transmitter. TIP: In the rare situation that you cannot find an open FM frequency, consult a professional car audio installer. You can improve the audio performance in your vehicle by using the Delphi FM Direct Adapter (model SA10112, sold separately). 22 23

Stock Ticker Direct Tune: Select channels faster With your MyFi, you can track up to 20 stock symbols Normally as you rotate the dial, you can preview what’s and see their prices and movements right on the playing on other XM channels before you push the dial screen.* in to select a channel. To automatically tune to the TO ADD A STOCK SYMBOL: channel without pressing the dial, you can set the following option: 1. Using the “menu” button and dial, select “Stock Ticker.” 1. Use the “menu” button and dial to select “Channel Access.” 2. Rotate the dial to highlight “Add Stocks” and press the dial in to select. 2. Select “Direct Tune.” 3. Rotate the dial to add each letter of the desired stock 3. Select “Direct Tune On.” (To return to the factory- symbol. Press the dial in after choosing each letter. default method, select “Direct Tune Off.”) (Your MyFi has a list of more than 9,000 stock symbols, and will not only help you complete each entry but Setting time features prevents you from entering incorrect symbols.) XM automatically sets the minutes of your MyFi’s built-in 4. When you’ve entered all your desired stock symbols, clock. You can adjust the hours by time zone, choose press the “menu” button several times (or simply 12- or 24-hour formats, and choose whether daylight- wait a few seconds) until your MyFi returns to normal saving time is used in your area. operation. 5. Press the “display” button until you see “Stocks” Your MyFi also has a sleep timer and an alarm. You can and a scrolling ticker across the bottom of the screen. set the sleep timer to shut off your MyFi automatically This display mode only works when you’re listening to after 15 minutes or up to an hour. The alarm turns on “LIVE” programming. your MyFi at a certain time; you can choose to be alerted TO ERASE some or all of the stock symbols, use the by a beep or by XM programming. “menu” button and dial to select “Stock Ticker,” then to select “Erase Stocks.” Follow the directions on your MyFi’s screen. Info Extras XM Satellite Radio will broadcast information such as sports scores and other features from time to time. To see what’s available, press the “menu” button and select “Info Extras.” Simply follow the instructions on the display to select which Info Extras you’re interested in. To view your chosen Info Extras, press the “display” Important: If you use your MyFi in your vehicle, you can button until you see the Info Extras items at the bottom choose whether your ignition key automatically powers of the screen. You can also affect how you view Info on your MyFi. Choose the “Vehicle Mode” menu, and Extras by selecting the “Change Display” option in the then the “Auto On/Off.” Set to “On” to turn MyFi on or menu. off with the ignition key. Set this option to “Off” if your MyFi is connected to power that is always live; you must then use MyFi’s power button to turn it on or off. For vehicles with power outlets that are always powered, we recommend that you use the “Delayed Power OFF” feature. This avoids draining your vehicle battery if your MyFi is left on. *Quotes are provided by ComStock, Inc. and cover most stocks listed on the NYSE, AMEX, or NASDAQ. Market information is delayed by approximately 25 minutes. 24 25

Skipping channels Using MyFi At Home You can simplify the list of channels that you see when Turn off your MyFi and your audio system. Connect you rotate the dial. To skip over a channel: your MyFi to your audio system in either way illustrated 1. Use the “menu” button and dial to select below. “Channel Access.” 2. Choose the “Channel Skip/Add” option. 3. You will see a list of channels. There is a “+” or a “-“ in front of each channel. To skip a channel, high- light that channel and press the dial in to change the “+” to “-.” To add a channel, change the “-“ to a “+.” 4. When you’re done, press the “menu” button twice (or do nothing for 15 seconds) until your MyFi returns to normal operation. TIP: You can still tune to any channel by entering the If you use the home stand and connect it to a stereo, channel number or by pressing a preset. Skipping a you must plug in the AC adapter and home antenna. channel does not remove it from use. Your MyFi’s audio output will not work if these are not connected. TIP: This should not be used for “parental control.” To If you attach your MyFi to powered speakers, adjust the completely block access to any XM channel, contact XM audio level using the speakers’ volume control. Listener Care at 1.800.XM.RADIO (1.800.967.2346). Returning to factory defaults You can return your MyFi to its factory-installed format. Be careful: This feature erases all settings, including Stock Ticker, display options, audio options, channel skip/add, Info Extras, and anything stored in “MY XM.” 1. Use the “menu” button and dial to select “Set Factory Defaults.” 2. Select “Yes” to restore your MyFi to the factory settings. TIP: If you hear nothing, try adjusting the volume controls located on your MyFi. If there does not appear to be power, check all connections and make sure all plugs are inserted completely. 26 27

Aiming the home antenna Using MyFi In Your Vehicle Your MyFi can help you aim the home antenna to pull in Because every vehicle is different, we can only provide the strongest signal available. some general guidelines. If you need help, consult a 1. Using the “menu” button and dial, choose professional installer. “Antenna Aiming.” 1. Decide which method (cassette adapter, professional 2. Slowly turn and tilt the antenna. The signal bars on wired FM, or self install via the XM SureConnect) is the display will change. Find the position that gives at best for your vehicle and location. least two bars on either “satellite” or “terrestrial.” 2. Always do a trial run before installing anything 3. The antenna aiming screen remains as long as it’s permanently. Temporarily connect all power, audio, needed to help you position the antenna. When and antenna lines. Make sure that you receive the you’ve found the best position, press the “menu” XM signal and that you hear XM programming button to return to normal operation. through your vehicle’s audio system. You must have your vehicle antenna plugged in to the cradle or the XM SureConnect to receive the signal. TIP: Your MyFi battery will charge in the vehicle cradle only while the MyFi power is turned ON. Please refer to “Other Things You Should Know” (page 35) for addi- tional information regarding charging the MyFi battery. TIP: If you experience difficulty obtaining a strong antenna signal based on your particular home setup conditions, a home antenna extension cable (model XMAC1000, sold separately) was designed specifically to help you and is available at www.xmradio.com along with many other cool XM Satellite Radio accessories. Audio quality Use the CASSETTE ADAPTER if your vehicle’s audio system has a built-in cassette player. 28 29

Placing the antenna Your XM antenna should be mounted on the vehicle’s metallic roof, at least 6" from any window or sunroof. op tio n 1 Keep excess cable behind or under the TO XM RADIO dashboard. XM op ANT t io n 2 Made in Malaysia TO FM RADIO TO FM ANT Avoid crimping, twisting, or chafing the XM antenna cable. Try to use existing holes, body grommets, and other wiring channels. If the vehicle is a For a neat, fully integrated installation, use the DELPHI hard- or soft-top FM DIRECT ADAPTER (model SA10112, sold separately). convertible, you may mount the antenna on the metal We recommend that you consult a professional installer. trunk lid. It should be at least 4" from the rear window. Ensure that the antenna and cable don’t interfere with the opening or closing of the convertible top and the trunk lid. TIP: If you route the antenna cable through the trunk seal, use the lowest part of the weather seal. This should minimize any water leaks. TIP: Don’t install the XM antenna inside your vehicle or on a nonmetallic surface. Doing so will likely degrade the signal and you will probably experience more signal interruptions. Self Install (XM SureConnect), See the XM SureConnct Installation Guide for more information. 30 31

Mounting your MyFi on the dash Using MyFi On The Go We’ve included three types of mounts to help you install Your MyFi contains a built-in antenna that works best your MyFi in your vehicle’s interior. when your MyFi receiver is upright. Use the belt clip to FLUSH MOUNT: Attach the included hold your MyFi in the proper position; laying your MyFi adhesive pad to the back of your down flat may weaken reception. MyFi’s vehicle cradle. Stick the vehicle TIP: If you carry your MyFi in a bag or use it while cradle onto a flat surface in your exercising, you can lock the buttons and dial and vehicle, preparing the surface as prevent something from accidentally pressing the described below. Do not install the buttons. Press and hold the “mute/pause/lock” button mount on a leather surface. Doing until you see the lock indicator in the display. To unlock so could permanently damage the controls, press and hold the “mute/pause/lock” the surface. button until the lock indicator disappears. VENT MOUNT: Assemble the vent mount as shown. Find a horizontal air vent that is strong enough to hold the weight of your MyFi and its cradle. Clip the vent mount into the vent. SWIVEL MOUNT: Find a suitable location; the mount uses a strong adhesive and you’ll have difficulty repositioning it after installation. Do not install this mount on a leather surface. Doing so could permanently damage the surface. Make sure the air temperature is at least 60°F (15°C). 1. Clean the mounting surface with the enclosed surface TIP: The belt clip doubles as a table stand; just pull out preparation kit. Allow to air-dry. the back leg. 2. Clean the same surface with the alcohol prep pad. TIP: You can plug the AC or cigarette lighter adapter Allow to air-dry. directly into the bottom of your MyFi. 3. You may warm the adhesive pad using a hair dryer or the vehicle’s defroster. Place the swivel mount accurately since it will bond on the first try. 4. For best results, do not touch or apply any pressure to the vehicle mount for 72 hours. To remove the swivel mount, first try lifting the adhesive pad with your fingers or a spoon. You may warm it with a hair dryer for 2-3 minutes to help soften the adhesive. Remove any leftover adhesive from the dash surface by rubbing with your finger, or you can use a mild cleaner as recommended by your vehicle’s manufacturer. Warning: MyFi should be placed in your vehicle where it will not interfere with the function of safety features, e.g., deployment of airbags. Failure to correctly place MyFi may result in injury to you or others if the unit becomes detached during an accident and/or obstructs the deployment of an airbag. 32 33

Signal reception guidelines Other Things You Should Know Your MyFi’s antenna should have an unobstructed view Care of the XM satellites in the southern sky. In large cities, XM also has a network of ground repeaters to help You should be able to take your MyFi along with you increase the signal coverage. during most of your daily activities. Still, you should remember: • Your MyFi is not waterproof. Avoid splashing it with liquids and never submerge it. • Take your MyFi with you when you leave your vehicle, especially on a hot day. Not only can you continue to enjoy XM programming, but you’ll also prolong the life of your MyFi’s case, display, and battery. • If your MyFi gets dirty, wipe the case with a soft cloth lightly moistened with water, then wipe dry with another cloth. Avoid chemicals such as paint thinner, alcohol, or abrasive cleansers. Important battery information—please read Your MyFi’s battery should be charged before you use the radio. The amount of charge is indicated by the battery level meter in your MyFi’s display. When you’re charging the battery, you will see . When the battery is exhausted, you will see . When you use your MyFi for the first time, charge the battery until the meter indicates it’s fully charged . Then use your MyFi until the battery is exhausted. This charge/discharge cycle calibrates the battery level meter so that it accurately reports the state of the battery. Your battery performs best when used and charged in an ambient temperature of between 50°F to 90°F (10°C to 32°C). Do not leave your MyFi inside a hot vehicle or in direct sunlight. Batteries gradually wear down and require longer charging times. When a battery no longer holds its charge, you should purchase a new battery. Always use authorized batteries and power adapters. Replacement batteries and power adapters can be ordered online at www.xmradio.com. To prevent injuring yourself or damaging your MyFi, do not disassemble, crush, or puncture the battery. Never allow metal to touch the battery terminals. Your MyFi’s rechargeable battery should be disposed of properly and may need to be recycled. Contact your local recycler for details. Never dispose of batteries in a fire or in water as they may explode. To remove the battery, follow the steps as shown. Use the clear tab to help you pull the battery out. 34 35

TIP: Both the home and vehicle power adapters can be Troubleshooting used independently from the home stand and vehicle Your MyFi should provide you with trouble-free cradle, plugging directly into the MyFi power connector. performance without needing any servicing. If it This feature provides a convenient alternative for battery does not appear to be working properly, first try to charging and powered operation when traveling or for remedy the problem by following these steps: using your MyFi away from home. 1. Attach all connections firmly and securely. 2. Make sure the battery is fully charged. 3. Reset your MyFi by removing the battery cover and inserting a paper clip into the hole marked “RESET” at the upper left-hand corner of the case. If you see this on the display: You should: NO SIGNAL Move your MyFi away from Cause: The XM signal is being obstructed area, e.g., an blocked. underground garage. ANTENNA Connect the external antenna. Cause: Possible problem with Make sure the cable and the built-in or external XM connector are not damaged antenna. or kinked. Cause: When using home Make sure the home or vehicle stand or vehicle cradle, home antenna is plugged into the or vehicle antenna is not home stand or vehicle cradle. plugged in. Accessories (sold separately) OFF AIR Tune to another channel. We’re always developing useful and clever accessories Cause: The channel is not for your MyFi. Check out www.xmradio.com or visit your currently broadcasting. favorite electronics retailers frequently. LOADING This message should Cause: Your MyFi is acquiring disappear in a few seconds audio or program information in good signal conditions. from the XM signal. UPDATING Simply wait a few seconds Cause: Your MyFi is being until the update is done. updated with the latest encryption code. Cause: You may have tried To receive that channel, to tune to a channel that contact XM Satellite Radio you have blocked or that at 1.800.967.2346. you cannot receive with your subscription package. 36 37

If this happens: You should: If this happens: You should: There is no power, or your Insert your MyFi into its home Your MyFi’s controls do not Check whether the lock indicator MyFi shuts off quickly. stand and plug the AC adapter respond. is being displayed. If so, unlock the into the wall to charge the battery. controls by pressing and holding Your MyFi’s battery is low the “mute/pause/lock” button (see page 12). until the lock indicator disappears (see page 33). You do not receive all XM Contact XM Satellite Radio. If you have unlocked the controls channels you have sub- Your MyFi may not be activated and they still do not respond, reset scribed to. (see page 14). your MyFi by carefully inserting the tip of a paper clip into the “RESET” Audio sounds distorted Reduce audio output level hole under the battery cover. when using the built-in FM (see page 21). You can also reset your MyFi by transmitter. removing and reinserting the battery. Audio is too soft when Increase audio output level using the built-in FM (see page 21). The display does not Reset your MyFi by following the transmitter. change or the backlight procedure above. does not turn on or No audio when using the Check to see if you have plugged turn off. home stand that is con- the AC adapter into the home nected to a stereo system. stand. The audio line output only Battery level meter doesn’t Fully charge the battery, then works when the AC adapter is match the charging or use your MyFi until the battery plugged in. expected playback time. is fully exhausted. This calibrates the battery level meter. You cannot tune to a Check that you have not chosen to channel. skip that channel (see page 26). If the problem persists, contact XM Satellite Radio at 1.800.967.2346. Verify that you are authorized to receive that channel as part of your XM subscription, and that you have not asked XM Satellite Radio to block that channel. No song title or artist Nothing is wrong with your MyFi. name displayed. That information may be in the process of being updated. On some sports and news channels, there is no title or artist information. No audio when listening Make sure that the FM radio and through your vehicle’s FM your MyFi are set to the same radio. frequency (see page 23). Audio has static while Change to another FM frequency listening through your (see page 23). If the problem persists, vehicle’s FM radio. you probably live in an area with few vacant FM frequencies. You may want to change to a hard-wired FM transmitter (see page 29). Audio on XM Instant Nothing is wrong with your MyFi. Traffic and Weather These channels use a different channels sounds different audio technology than the other from other XM channels. XM channels. 38 39

Contacting Technical Support and Customer Service Warranty For additional information in solving problems Delphi limited consumer warranty with your MyFi, contact Delphi Technical Support at Delphi Product and Service Solutions (“Delphi”) warrants all XM Satellite 1.877.GODELPHI (1.877.463.3574) 8:00 a.m. to 8:00 p.m. Radio Products sold by Delphi (each “Product”) to be free of defects in Eastern Time, Monday—Friday. material and workmanship, subject to the following conditions: Technical Support is also available at www.delphi.com. Subject to express limitations with respect to the battery and ear bud com- ponents of any Product, the duration of Delphi’s warranty with respect to each Product is limited to one (1) year from the date of sale to the original Technical information consumer purchaser. The duration of Delphi’s warranty with respect to the battery and ear bud components of any Product is limited to thirty (30) DIMENSIONS days from the date of sale to the original consumer purchaser. MyFi receiver: 4.5 in. H x 2.8 in. W x 1.2 in. D No other express warranties are made with respect to any Product. (114 mm H x 71 mm W x 30 mm D) All implied warranties, including warranties of merchantability and MyFi remote: 4.8 in. H x 1.9 in. W x 1.2 in. D fitness for a particular purpose are limited to the warranty period (122 mm H x 48 mm W x 30 mm D) set forth above. This warranty is not transferable and applies only to the original consumer purchaser of the Product. Delphi will, as its sole obligation under this warranty, replace or repair, at its WEIGHT option, any Product that does not conform to this warranty. Products may be repaired or replaced with new or with refurbished items. This limited MyFi receiver: 7.2 oz. (196 g) with battery warranty does not cover defects in appearance, cosmetic or decorative MyFi remote: 2.9 oz. (82 g) items, including any non-operative parts. Under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties. These remedies are the customer’s BATTERY exclusive remedies for breach of warranty. This limited warranty only extends to customers who purchase the Products in the United States. MyFi receiver: 3.6 V lithium-ion Delphi will not be responsible for damage resulting from any (i) deviation MyFi remote: 2 AAA cells of Delphi’s operating instructions as printed in Delphi’s catalog or on any packaging, labels or other literature provided with a Product, (ii) installation of a Product in a manner which is inconsistent with Delphi’s written instruc- INPUTS AND OUTPUTS tions, (iii) alteration or modification of a Product, (iv) misuse, (v) neglect, Antenna (home stand and vehicle cradle): (vi) abuse, (vii) accident, (viii) normal wear and tear, (ix) commercial use, (x) improper storage, (xi) environmental conditions, including excessive 1 RF SMB connector temperature or humidity, (xii) service by anyone other than a Delphi Antenna (MyFi receiver): 1 RF SSMB connector authorized repair facility, (xiii) other improper application, installation or operation of this Product, or (xiv) defects or malfunctions of which Power: 5 V, 2000 mA maximum current, positive polarity Delphi is not advised within ten (10) days of the expiration of the limited warranty period. Audio output: 3.5 mm diameter mini-stereo jack 40 41

How you (the Customer) can get service To obtain warranty service during the first thirty (30) days after the date of purchase, you must return the defective Product with the original receipt to the original place of purchase. To obtain warranty service during the first thirty (30) days for Products purchased from www.delphi.com and for all Products for the remainder of the limited warranty period, you must contact Delphi by phone at 1.877.GO DELPHI (1.877.463.3574) or by fax at 1.866.790.3675. When contacting Delphi by fax, please include a letter detailing your complaint and a daytime telephone number where you can be reached. If further clarification or additional information is required from Delphi, you may call Delphi at 1.877.GO DELPHI (1.877.463.3574). If warranty service is needed at any time during the warranty period, the purchaser will be required to furnish a sales receipt/proof of purchase indicating the date of purchase, amount paid and place of purchase. Customers who fail to provide such proof of purchase will be charged for the repair/replacement of any Product. How state law relates to the warranty Some states do not allow limitations on the duration of implied warranties, or the exclusion or the limitation of incidental or consequential damages. So the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You may also have other rights that may vary from state to state. NO PERSON IS AUTHORIZED BY DELPHI TO MODIFY OR ADD TO THIS LIMITED WARRANTY. 42 43


Document Created: 2007-05-21 11:43:47
Document Modified: 2007-05-21 11:43:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC