Description of Change

FCC ID: RRK2005090049-1

Cover Letter(s)

Download: PDF

FCCID_783805

FCC ID: RRK2005090049-1

Description of Permissive Change

This report is prepared for FCC class II permissive change. The difference compared with the
Report No.: RF950518H03 design is as the following
u Cancel Original model of WMP-D18 (with Turbo feature).
u Cancel Original frequency: 5250MHz-5350MHz.
u Add one antenna for 5GHz. (Only apply 5150MHz-5250MHz & 5725MHz-5850MHz band)
Original Report (Report No.:RF950518H03)
For 2.4GHz
No. Model No. Gain (dBi) Antenna Type Connector
1 WSS001 2 Dipole RP-SMA(M)
2 WPB002-3 4.5 PCB MHF
Note: Antenna 1 is connected with Main port of EUT
Antenna 2 is connected with AUX port of EUT
For 5GHz
Cable Loss Net Gain
No. Model No. Gain (dBi) Antenna Type Connector
(dB) (dB)
1 SAA04-220080 5 1.8 3.2 Dipole RP-N plug
Note: Antenna 1 is connected with Main port of EUT
Add one new antenna
< Only apply 5150MHz-5250MHz & 5725MHz-5850MHz band >
Cable Loss Net Gain Antenna
Model No. Gain (dBi) Connector RF cable
(dB) (dB) Type
3 0.785 2.215 100 mm
3 0.785 2.215 100 mm
MAF94192 PIFA I-PEX MHF
3 1.1 1.9 120 mm
3 1.5 1.5 160 mm
Note: 1. There will have four conditions for this antenna.
2. The bold type was chose for test.

Report No. RF950518H03A
|Reference No.: 960316H01

Document Created: 2007-04-23 16:09:41
Document Modified: 2007-04-23 16:09:41

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC