Modular Approval Request

FCC ID: RRK2005090049-1

Cover Letter(s)

Download: PDF

FCCID_683352

FCC ID: RRK2005090049-1

Modular Approval Request Letter

Advance Data Technology
July 17, 2006

Dear Application Examiner,

Alpha Networks Inc.’s IEEE 802.11a/b/g MiniPCI Card, FCC ID: RRK2005090049-1,
would like to have your authorization as a modular approval. The requirements of
Public Notice DA00-1407 have been met and shown on the following statements.

1. “The modular transmitter must have its own RF shielding.” The radio portion of
this module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT
has buffered data inputs, it is integrated in chip AR5414A.

3. “The modular transmitter must have its own power supply regulation.” The chips
RF converter which will influence the frequency radiation, have to be 1.8VDC
powered. The MiniPCI interface provides 3.3VDC, so there are regulators in
front of these chips, the part number of this regulator is AR5414A.

4. “The modular transmitter must comply with the antenna requirements of section
15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The
spurious emission, unique antenna connector and photo of antennas are shown in
the test report.

5. “The modular transmitter must be tested in a stand-alone configuration” The EUT
was placed on an extended card which connected to Notebook Computer as a
stand-alone configuration. The EUT was tested via the outside a Notebook
Computer. Please see section Photographs of Test Configuration in the test
report.

6. “The modular transmitter must be labeled with its own FCC ID number.” Please
see exhibition Label Sample for the FCC ID of this module. And also in the
exhibition Users Manual, there are instructions give to the OEM on how to label
the end product.

Report No. RF950518H03

Document Created: 2006-07-17 21:29:41
Document Modified: 2006-07-17 21:29:41

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC