Human Exposure

FCC ID: RRK-2012070022

RF Exposure Info

Download: PDF
FCCID_1945114

Report No.: FR310926-01 Appendix B. Maximum Permissible Exposure FCC ID: RRK-2012070022 Page No. : B1 of B3

Report No.: FR310926-01 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Averaging Time Frequency Range Electric Field Magnetic Field Power Density (S) |E|²,|H|² or S (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Averaging Time Frequency Range Electric Field Magnetic Field Power Density (S) |E|²,|H|² or S (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) ＝ 30  P  G Power Density: Pd (W/m²) ＝ E2 d 377 E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 30  P  G 377  d 2 From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. FCC ID: RRK-2012070022 Page No. : B2 of B3

Report No.: FR310926-01 1.3. Calculated Result and Limit EUT (FCC ID: RRK-2012070022) For 5GHz UNII Band 1: Antenna Type : PCB Antenna Max Conducted Power for IEEE 802.11n MCS0 40MHz : 16.87 dBm Average Average Power Density Limit of Power Antenna Gain Antenna Gain Output Power Output Power (S) Density (S) Test Result (dBi) (numeric) (dBm) (mW) (mW/cm²) (mW/cm²) 3.82 2.4099 16.8532 48.4534 0.023242 1 Complies For 5GHz UNII Band 2~3: Antenna Type : PCB Antenna Max Conducted Power for IEEE 802.11ac MCS0 40MHz : 23.86 dBm Average Average Power Density Limit of Power Antenna Gain Antenna Gain Output Power Output Power (S) Density (S) Test Result (dBi) (numeric) (dBm) (mW) (mW/cm²) (mW/cm²) 3.82 2.4099 23.8629 243.3823 0.116745 1 Complies For 5GHz ISM Band: Antenna Type : PCB Antenna Max Conducted Power for IEEE 802.11ac MCS0 20MHz: 25.59 dBm Average Average Power Density Limit of Power Antenna Gain Antenna Gain Output Power Output Power (S) Density (S) Test Result (dBi) (numeric) (dBm) (mW) (mW/cm²) (mW/cm²) 3.82 2.4099 25.5854 361.8574 0.173575 1 Complies Wireless AC1200 Dual Band Gigabit Cloud Router USB 3.0 (FCC ID: KA2IR860LA1) Max Conducted Power for IEEE 802.11n: 22.27 dBm Average Average Power Density Limit of Power Antenna Gain Antenna Gain Output Power Output Power (S) Density (S) Test Result (dBi) (numeric) (dBm) (mW) (mW/cm²) (mW/cm²) 4.26 2.6669 22.2717 168.7196 0.089560 1 Complies CONCULSION: Both of the EUT (FCC ID: RRK-2012070022) and Wireless AC1200 Dual Band Gigabit Cloud Router USB 3.0 (FCC ID: KA2IR860LA1) can transmit simultaneously, the formula of calculatedthe MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.173575 / 1 + 0.089560 / 1 = 0.263135, which isless than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit. FCC ID: RRK-2012070022 Page No. : B3 of B3


Document Created: 2019-11-15 08:45:31
Document Modified: 2019-11-15 08:45:31
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC