Test report_FCC15B

FCC ID: RKXMYKONOS3

Test Report

Download: PDF
FCCID_2517649

Final Report on Parrot BEBOP DRONE Report Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 Date: January 19, 2015 Test Laboratory: 7 layers AG Borsigstrasse 11 40880 Ratingen Germany Note : The following test results relate only to the de vice s specified in this document. This re port sha ll not be reproduced in parts without the written approval of the test la boratory . 7 layers AG Aufsichtsratsvorsitzender Registerger icht registe red in: Borsigstra sse 11 Chairma n of the Superv isory Board: Düsseld orf, HRB 44096 40880 Ratinge n, Ger ma ny P eter Mertel USt-IdNr VAT No.: Phone : +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax : +49 (0) 2102 749 350 Dr. H. Ansorge TAX No. 147/5869/0385 www.7Lay ers.com A Bureau Veritas Group Company



Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 2.4 Auxiliary Equipment AE No. Type Designation Serial No. HW Status SW Status Description AE 03 Cable adapter usb / RJ45 AE 09 Eithernet Cable AE 01 USB Cable AE 04 Fujitsu LIFEBOOK E DSCK013817 Laptop RE Series E781 AE 06 LG L17NB-3 504WAHS3J881 EMC TFT 1 AE 07 Logitech M-BT58 HC60915A2XC Mouse AE 08 Logitech Ultrax Media ST635J01624 Keyboard Keyboard AE 02 PI020572 Lithium-ion polymer rechargeable AE 05 SED100P2-19.0 07Y17323A 120v/60Hz AC AC Adapter 2.5 Setups used for Testing For each setup a relation is given to determine if and which samples and auxiliary equipment is used. The left side list all OUT samples and the right side lists all auxiliary equipment for the given setup. Setup No. List of OUT samples List of auxiliary equipment Sample No. Sample Description AE No. AE Description Setup_AC03 (Computer Peripheral setup) Sample: ac03 New radiated sample AE 03 Cable adapter usb / RJ45 AE 09 Eithernet Cable AE 01 USB Cable AE 04 Laptop RE AE 06 EMC TFT 1 AE 07 Mouse AE 08 Keyboard AE 02 Lithium-ion polymer rechargeable AE 05 AC Adapter Page 4 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 3 Results 3.1 General Documentation of tested Available at the test laboratory. devices: Interpretation of the The results of the inspection are described on the following test results: pages, where 'Conformity' or 'Passed' means that the certification criteria were verified and that the tested device is conform to the applied standard. In cases where 'Declaration' is printed, the required documents are available in the manufacturers product documentation. In cases where 'not applicable' is printed, the test case requirements are not relevant to the specific equipment implementation. Note: 1. All tests are performed under environmental conditions within the requirements of the specifications. Environmental conditions are available at the laboratory. 2. This report contains the abbreviated information content pertaining to services rendered. Supporting documentation not included herein is maintained and available at the laboratory. 3.2 List of the Applicable Body (Body for Scope: FCC_v2) Designation Description FCC47CFRChIPART15bRADIO Part 15, Subpart B - Unintentional Radiators FREQUENCY DEVICES 3.3 List of Test Specification Test Specification: FCC part 2 and 15 Version 10-1-13 Edition Title: PART 2 - GENERAL RULES AND REGULATIONS PART 15 - RADIO FREQUENCY DEVICES Page 5 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 3.4 Summary Test Case Identifier / Name Lab Test (condition) Result Date of Test Ref. Setup 15b.1 Conducted Emissions (AC Power Line) §15.107 15b.1; Mode = Generating a high power Passed 2014/12/18 Lab 1 Setup_AC03 consumption 15b.2 Spurious Radiated Emissions §15.109 15b.2; Mode = Generating a high power Passed 2014/12/18 Lab 2 Setup_AC03 consumption Page 6 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 3.5 Detailed Results 3.5.1 15b.1 Conducted Emissions (AC Power Line) §15.107 Test: 15b.1; Mode = Generating a high power consumption Result: Passed Setup No.: Setup_AC03 Date of Test: 2014/12/18 22:25 Body: FCC47CFRChIPART15bRADIO FREQUENCY DEVICES Test Specification: FCC part 2 and 15 Page 7 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 Detailed Results: AC MAINS CONDUCTED EUT: DE1018005ac03 Manufacturer: Parrot Operating Condition: Tx on 2437 MHz, Ch.6 b-mode computer peripher, 120 V / 60 Hz Test Site: 7 layers Ratingen Operator: moh Test Specification: ANSI C63.4; FCC 15.107 / 15.207 Comment: FCC part 15 B, Class B Start of Test: 18.12.2014 / 19:33:35 SCAN TABLE: "FCC Voltage" Short Description: FCC Voltage Start Stop Step Detector Meas. IF Transducer Frequency Frequency Width Time Bandw. 150.0 kHz 30.0 MHz 5.0 kHz MaxPeak 20.0 ms 9 kHz ESH3-Z5 Average Level [dBµV] 80 70 60 50 x x 40 x + 30 20 10 0 150k 300k 500k 1M 2M 3M 5M 7M 10M 30M Frequency [Hz] x MES PAR_1430_123_fin QP + MES PAR_1430_123_fin AV MES PAR_1430_123_pre PK MES PAR_1430_123_pre AV LIM FCC 15b QP volt Voltage QP Limit LIM FCC 15b AV volt Voltage QP Limit Page 8 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 MEASUREMENT RESULT: "PAR_1430_123_fin QP" 18.12.2014 19:41 Frequency Level Transd Limit Margin Line PE MHz dBµV dB dBµV dB 0.510000 49.60 10.1 56 6.4 L1 FLO 1.085000 46.40 10.1 56 9.6 N FLO 1.765000 41.20 10.1 56 14.8 N FLO MEASUREMENT RESULT: "PAR_1430_123_fin AV" 18.12.2014 19:41 Frequency Level Transd Limit Margin Line PE MHz dBµV dB dBµV dB 0.520000 36.20 10.1 46 9.8 L1 GND Page 9 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 3.5.2 15b.2 Spurious Radiated Emissions §15.109 Test: 15b.2; Mode = Generating a high power consumption Result: Passed Setup No.: Setup_AC03 Date of Test: 2014/12/18 22:22 Body: FCC47CFRChIPART15bRADIO FREQUENCY DEVICES Test Specification: FCC part 2 and 15 Page 10 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 Detailed Results: EMI RADIATED TEST EUT: (DE1018005ac03 ) Manufacturer: Parrot Operating Condition: WLAN TX on 2437 MHz,Ch.6,b-mode, computer peripheral; 120V/60Hz, data transfer Test Site: 7 layers, Ratingen Operator: Uro Test Specification: FCC Part 15 B Class B Comment: Horizontal EUT position Start of Test: 18.12.2014 / 08:50:26 SCAN TABLE: "FCC part 15 b" Short Description: FCC part 15 b Start Stop Step Detector Meas. IF Transducer Frequency Frequency Width Time Bandw. 30.0 MHz 1.0 GHz 60.0 kHz MaxPeak 1.0 ms 120 kHz HL562 Level [dBµV/m] 80 70 60 50 40 x xx x x 30 x x x x 20 x 10 0 30M 50M 70M 100M 200M 300M 500M 700M 1G Frequency [Hz] x MES PAR_1430_122_fin QP MES PAR_1430_122_pre PK LIM FCC ClassB F QP/AV FCC ClassB, field strength Page 11 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 MEASUREMENT RESULT: "PAR_1430_122_fin QP" 18.12.2014 09:30 Frequency Level Transd Limit Margin Height Azimuth Polarisation MHz dBµV/m dB dBµV/m dB cm deg 36.000000 28.60 18.0 40.0 11.4 100.0 157.00 VERTICAL 87.480000 30.20 10.9 40.0 9.8 100.0 338.00 VERTICAL 94.380000 34.40 11.1 43.5 9.1 128.0 337.00 VERTICAL 95.880000 35.80 11.2 43.5 7.7 106.0 338.00 VERTICAL 98.460000 35.70 11.3 43.5 7.8 100.0 308.00 VERTICAL 101.880000 39.30 11.4 43.5 4.2 109.0 301.00 VERTICAL 108.540000 34.50 11.7 43.5 9.0 100.0 329.00 VERTICAL 194.760000 28.50 9.7 43.5 15.0 100.0 161.00 VERTICAL 399.600000 25.80 15.3 46.0 20.2 100.0 338.00 HORIZONTAL 488.460000 20.50 17.2 46.0 25.5 139.0 224.00 VERTICAL Page 12 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 4 Test Equipment Details 4.1 List of Used Test Equipment The calibration, hardware and software states are shown for the testing period. Test Equipment Anechoic Chamber Lab ID: Lab 2 Manufacturer: Frankonia Description: Anechoic Chamber for radiated testing Type: 10.58x6.38x6.00 m³ Calibration Details Last Execution Next Exec. NSA (FCC) 2014/01/09 2017/01/09 Single Devices for Anechoic Chamber Single Device Name Type Serial Number Manufacturer Air compressor none - Atlas Copco Anechoic Chamber 10.58 x 6.38 x 6.00 m³ none Frankonia Calibration Details Last Execution Next Exec. FCC listing 96716 3m Part15/18 2014/01/09 2017/01/08 Controller Maturo MCU 961208 Maturo GmbH EMC camera CE-CAM/1 - CE-SYS EMC camera Nr.2 CCD-400E 0005033 Mitsubishi Filter ISDN B84312-C110-E1 Siemens&Matsushita Filter Universal 1A BB4312-C30-H3 - Siemens&Matsushita Page 13 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 Test Equipment Auxiliary Equipment for Conducted emissions Lab ID: Lab 1 Manufacturer: Rohde & Schwarz GmbH & Co.KG Description: EMI Conducted Auxiliary Equipment Single Devices for Auxiliary Equipment for Conducted emissions Single Device Name Type Serial Number Manufacturer Cable "LISN to ESI" RG214 W18.03+W48.03 Huber&Suhner Impedance ISN T800 36159 Teseq GmbH Stabilization Network Calibration Details Last Execution Next Exec. Standard Calibration 2014/02/06 2016/02/28 Impedance ISN/CDN ENY41 100002 Rohde & Schwarz GmbH & Stabilization Network, Co. KG Coupling Decoupling Network Calibration Details Last Execution Next Exec. Standard calibration 2013/03/01 2015/03/31 Impedance ISN/CDN ST08 36292 Teseq GmbH Stabilization Network, Coupling Decoupling Network Calibration Details Last Execution Next Exec. Standard calibration 2014/01/10 2016/01/31 Impedance ISN/CDN T8-Cat6 32187 Teseq GmbH Stabilization Network, Coupling Decoupling Network Calibration Details Last Execution Next Exec. Standard Calibration 2014/01/08 2016/01/31 One-Line V-Network ESH 3-Z6 100489 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Exec. standard calibration 2014/06/18 2017/11/30 One-Line V-Network ESH 3-Z6 100570 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Exec. Standard Calibration 2013/11/25 2016/11/24 Two-Line V-Network ESH 3-Z5 828304/029 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Exec. Standart Calibration 2013/03/01 2015/02/28 Two-Line V-Network ESH 3-Z5 829996/002 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Exec. Standard Calibration 2013/03/01 2015/02/28 Page 14 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 Test Equipment Auxiliary Equipment for Radiated emissions Lab ID: Lab 2 Description: Equipment for emission measurements Serial Number: see single devices Single Devices for Auxiliary Equipment for Radiated emissions Single Device Name Type Serial Number Manufacturer Antenna mast AM 4.0 AM4.0/180/11920 Maturo GmbH 513 Biconical Broadband SBA 9119 9119-005 Schwarzbeck Antenna Biconical dipole VUBA 9117 9117-108 Schwarzbeck Calibration Details Last Execution Next Exec. Standard Calibration 2012/01/18 2015/01/17 Broadband Amplifier JS4-18002600-32-5P 849785 Miteq 18MHz-26GHz Broadband Amplifier AFS4-01000400-1Q-10P-4 - Miteq 1GHz-4GHz Broadband Amplifier JS4-00101800-35-5P 896037 Miteq 30MHz-18GHz Cable "ESI to EMI EcoFlex10 W18.01- Kabel Kusch Antenna" 2+W38.01-2 Cable "ESI to Horn UFB311A+UFB293C W18.02- Rosenberger Micro-Coax Antenna" 2+W38.02-2 Double-ridged horn HF 906 357357/001 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Exec. Standard Calibration 2012/05/18 2015/05/17 Double-ridged horn HF 906 357357/002 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Exec. Standard Calibration 2012/06/26 2015/06/25 High Pass Filter 4HC1600/12750-1.5-KK 9942011 Trilithic High Pass Filter 5HC2700/12750-1.5-KK 9942012 Trilithic High Pass Filter 5HC3500/12750-1.2-KK 200035008 Trilithic High Pass Filter WHKX 7.0/18G-8SS 09 Wainwright Horn Antenna BBHA 9170 Schwarzbeck 15-26 GHz BBHA 9170 Log.-per. Antenna HL 562 Ultralog 100609 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Exec. Standard Calibration 2012/12/18 2015/12/17 Log.-per. Antenna HL 562 Ultralog 830547/003 Rohde & Schwarz GmbH & Co. KG Loop Antenna HFH2-Z2 829324/006 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Exec. DKD Calibration 2014/11/27 2017/11/27 Pyramidal Horn 3160-09 00083069 EMCO Elektronik GmbH Antenna 26,5 GHz Page 15 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 Single Devices for Auxiliary Equipment for Radiated emissions (continued) Single Device Name Type Serial Number Manufacturer Pyramidal Horn 3160-10 00086675 EMCO Elektronik GmbH Antenna 40 GHz Tilt device Maturo Antrieb TD1.5-10kg TD1.5- Maturo GmbH (Rohacell) 10kg/024/379070 9 Test Equipment Auxiliary Test Equipment Lab ID: Lab 2 Manufacturer: see single devices Description: Single Devices for various Test Equipment Type: various Serial Number: none Single Devices for Auxiliary Test Equipment Single Device Name Type Serial Number Manufacturer Broadband Power 1506A / 93459 LM390 Weinschel Associates Divider N (Aux) Broadband Power WA1515 A855 Weinschel Associates Divider SMA Digital Multimeter 03 Fluke 177 86670383 Fluke Europe B.V. (Multimeter) Calibration Details Last Execution Next Exec. Customized calibration 2013/12/04 2015/12/03 Fibre optic link FO RS232 Link 181-018 Pontis Satellite (Aux) Fibre optic link FO RS232 Link 182-018 Pontis Transceiver (Aux) Isolating Transformer LTS 604 1888 Thalheimer Transformatorenwerke GmbH Notch Filter Ultra WRCA800/960-6EEK 24 Wainwright Stable (Aux) Signal Analyzer FSV30 103005 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Exec. Standard 2014/02/10 2016/02/09 Spectrum Analyser FSP3 836722/011 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Exec. Standard 2012/06/13 2015/06/12 DKD calobration 2014/11/24 2017/11/23 Spectrum Analyser FSU26 200418 Rohde & Schwarz GmbH & Co.KG Calibration Details Last Execution Next Exec. Standard calibration 2014/07/29 2015/07/28 Vector Signal SMIQ 03B 832492/061 Rohde & Schwarz GmbH & Generator Co.KG Page 16 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 Test Equipment Digital Signalling Devices Lab ID: Lab 1, Lab 2 Description: Signalling equipment for various wireless technologies. Single Devices for Digital Signalling Devices Single Device Name Type Serial Number Manufacturer Bluetooth Signalling CBT 100589 Rohde & Schwarz GmbH & Unit CBT Co. KG CMW500 CMW500 107500 Rohde & Schwarz GmbH & Co.KG Calibration Details Last Execution Next Exec. Standard calibration 2014/01/27 2016/01/26 Digital Radio CMD 55 831050/020 Rohde & Schwarz GmbH & Communication Tester Co. KG Calibration Details Last Execution Next Exec. DKD calibration 2014/12/02 2017/12/01 Universal Radio CMU 200 102366 Rohde & Schwarz GmbH & Communication Tester Co. KG HW/SW Status Date of Start Date of End Hardware: 2007/07/16 B11, B21V14, B21-2, B41, B52V14, B52-2, B53-2, B56V14, B68 3v04, PCMCIA, U65V04 Software: K21 4v21, K22 4v21, K23 4v21, K24 4v21, K42 4v21, K43 4v21, K53 4v21, K56 4v22, K57 4v22, K58 4v22, K59 4v22, K61 4v22, K62 4v22, K63 4v22, K64 4v22, K65 4v22, K66 4v22, K67 4v22, K68 4v22, K69 4v22 Firmware: µP1 8v50 02.05.06 --- Universal Radio CMU 200 837983/052 Rohde & Schwarz GmbH & Communication Tester Co. KG Calibration Details Last Execution Next Exec. DKD calibration 2014/12/03 2017/12/02 HW/SW Status Date of Start Date of End HW options: 2007/01/02 B11, B21V14, B21-2, B41, B52V14, B52-2, B53-2, B54V14, B56V14, B68 3v04, B95, PCMCIA, U65V02 SW options: K21 4v11, K22 4v11, K23 4v11, K24 4v11, K27 4v10, K28 4v10, K42 4v11, K43 4v11, K53 4v10, K65 4v10, K66 4v10, K68 4v10, Firmware: µP1 8v40 01.12.05 --- SW: 2008/11/03 K62, K69 Vector Signal SMU200A 100912 Rohde & Schwarz GmbH & Generator Co. KG Page 17 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 Test Equipment Emission measurement devices Lab ID: Lab 1, Lab 2 Description: Equipment for emission measurements Serial Number: see single devices Single Devices for Emission measurement devices Single Device Name Type Serial Number Manufacturer Personal Computer Dell 30304832059 Dell Power Meter NRVD 828110/016 Rohde & Schwarz GmbH & Co.KG Calibration Details Last Execution Next Exec. Standard calibration 2014/05/13 2015/05/12 Sensor Head A NRV-Z1 827753/005 Rohde & Schwarz GmbH & Co.KG Calibration Details Last Execution Next Exec. Standard calibration 2014/05/13 2015/05/12 Signal Generator SMR 20 846834/008 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Exec. Standard Calibration 2014/06/24 2017/06/23 Spectrum Analyzer ESIB 26 830482/004 Rohde & Schwarz GmbH & Co. KG Calibration Details Last Execution Next Exec. Standard Calibration 2014/01/07 2016/01/31 HW/SW Status Date of Start Date of End Firmware-Update 4.34.4 from 3.45 during calibration 2009/12/03 Test Equipment Shielded Room 02 Lab ID: Lab 1 Manufacturer: Frankonia Description: Shielded Room for conducted testing Type: 12 qm Serial Number: none Test Equipment T/A Logger 13 Lab ID: Lab 1, Lab 2 Description: Lufft Opus10 TPR Type: Opus10 TPR Serial Number: 13936 Single Devices for T/A Logger 13 Single Device Name Type Serial Number Manufacturer ThermoAirpressure Opus10 TPR (8253.00) 13936 Lufft Mess- und Datalogger 13 Regeltechnik GmbH (Environ) Calibration Details Last Execution Next Exec. Customized calibration 2013/02/07 2015/02/06 Page 18 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 Test Equipment T/H Logger 02 Lab ID: Lab 1 Description: Lufft Opus10 Serial Number: 7489 Single Devices for T/H Logger 02 Single Device Name Type Serial Number Manufacturer ThermoHygro Opus10 THI (8152.00) 7489 Lufft Mess- und Datalogger 02 Regeltechnik GmbH (Environ) Calibration Details Last Execution Next Exec. Customized calibration 2013/02/07 2015/02/06 Test Equipment T/H Logger 12 Lab ID: Lab 2 Description: Lufft Opus10 Serial Number: 12482 Single Devices for T/H Logger 12 Single Device Name Type Serial Number Manufacturer ThermoHygro Opus10 THI (8152.00) 12482 Lufft Mess- und Datalogger 12 Regeltechnik GmbH (Environ) Calibration Details Last Execution Next Exec. Customized calibration 2013/01/07 2015/01/06 Page 19 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 5 Annex 5.1 Additional Information for Report Page 20 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 Test Description _____________ _______________________________ Conducted emissions (AC power line) _______________________________ Standard FCC Part 15 Subpart B The test was performed according to: ANSI C 63.4, 2009 Test Description The test set-up was made in accordance to the general provisions of ANSI C 63.4-2009. The Equipment Under Test (EUT) was setup in a shielded room to perform the conducted emissions measurements in a typical installation configuration. The EUT was connected to a 50 µH || 50 Ohm Line Impedance Stabilization Network (LISN), which meets the requirements of ANSI C63.4–2009, Annex B, in the frequency range of the measurements. The LISN’s unused connections were terminated with 50 Ohm loads. AC Power supply voltage for EUT: 120 V 60 Hz (if not stated within the measurement plot and/or test result). The measurement procedure consists of two steps. It is implemented into the EMI test software ES-K1 from R&S. Step 1: Preliminary scan Intention of this step is, to determine the conducted EMI-profile of the EUT. EMI receiver settings: - Detector: Peak - Maxhold - Frequency range: 150 kHz – 30 MHz - Frequency steps: 5 kHz - IF–Bandwidth: 9 kHz - Measuring time / Frequency step: 20 ms - Measurement on phase + neutral lines of the power cords On basis of this preliminary scan the highest amplitudes and the corresponding frequencies relative to the limit are identified. Emissions above the limit and emissions which are in the 10 dB range below the limit are considered. Step 2: Final measurement Intention of this step is, to determine the highest emissions with the settings defined in the test specification for the frequencies identified in step 1. EMI receiver settings: - Detector: Quasi-Peak - IF - Bandwidth: 9 kHz - Measuring time: 1 s / frequency At each frequency determined in step 1, four measurements are performed in the following combinations: 1) Neutral lead - reference ground (PE grounded) 2) Phase lead - reference ground (PE grounded) 3) Neutral lead - reference ground (PE floating) 4) Phase lead - reference ground (PE floating) The highest value is reported. Test Requirements / Limits If not stated within the measurement plot and/or test result, class B limits are applied. FCC Part 15, Subpart B, §15.107, Class B Limit Frequency Range (MHz) QP Limit (dBµV) AV Limit (dBµV) 0.15 – 0.5 66 to 56 56 to 46 0.5 – 5 56 46 5 – 30 60 50 Page 21 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 FCC Part 15, Subpart B, §15.107, Class A Limit Frequency Range (MHz) QP Limit (dBµV) AV Limit (dBµV) 0.15 - 0.5 79 66 0.5 – 30 73 60 Used conversion factor: Limit (dBµV) = 20 log (Limit (µV)/1µV). NOTES: A missing result table in the corresponding test report section means, that no final measurement was performed because no relevant frequencies (peaks) were found in the preliminary scan. The chosen operating mode is selected as representative mode to generate “worst-case” conditions, i.e. high power consumption. _______________________ Spurious radiated emissions _______________________ Standard FCC Part 15, Subpart B The test was performed according to: ANSI C 63.4, 2009 Test Description Measurement below 1 GHz: The test set-up was made in accordance to the general provisions of ANSI C 63.4-2009. The Equipment Under Test (EUT) was set up on a non-conductive table 1.0 x 2.0 m in the semi-anechoic chamber. The influence of the EUT support table that is used between 30–1000 MHz was evaluated. The test was performed at the distance of 3 m between the EUT and the receiving antenna. The measurement procedure is implemented into the EMI test software ES-K1 from R&S. The radiated emissions measurements were made in a typical installation configuration. Exploratory tests are performed at 3 orthogonal axes to determine the worst-case orientation of a body-worn or handheld EUT. The final test on all kind of EUTs is performed at 2 axes. A pre-check is also performed while the EUT is powered from both AC and DC (battery) power in order to find the worst-case operating condition. AC Power supply voltage for EUT: 120 V 60 Hz (if not stated within the measurement plot and/or test result). Step 1: Preliminary scan (test to identify the highest amplitudes relative to the limit) Intention of this step is, to determine the radiated EMI-profile of the EUT. Settings for step 1: - Detector: Peak-Maxhold - Frequency range: 30 – 1000 MHz - Frequency steps: 60 kHz - IF–Bandwidth: 120 kHz - Measuring time / Frequency step: 100 µs - Turntable angle range: –180° to +180° - Turntable step size: 90° - Height variation range: 1 – 3 m - Height variation step size: 2 m - Polarization: Horizontal + Vertical On basis of this preliminary scan the highest amplitudes and the corresponding frequencies relative to the limit are identified. Emissions above the limit and emissions which are in the 10 dB range below the limit are considered. Step 2: A further measurement will be performed on the frequencies determined in step 1. Intention of this step is, to find out the approximate turntable angle and antenna height for each frequency. Settings for step 2: - Detector: Peak – Maxhold - Measured frequencies: in step 1 determined frequencies - IF – Bandwidth: 120 kHz - Measuring time: 100 ms - Turntable angle range: –180° to +180° - Turntable step size: 45° - Height variation range: 1 – 4 m - Height variation step size: 0.5 m - Polarizations: horizontal + vertical After this step the EMI test system has determined the following values for each frequency (of step 1): Page 22 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 - Frequency - Azimuth value (of turntable) - Antenna height The last two values have now the following accuracy: - Azimuth value (of turntable): 45° - Antenna height: 0.5 m Step 3: final measurement In this step the accuracy of the turntable azimuth and antenna height will be improved. This is necessary to find out the maximum value of every frequency. For each frequency, which was determined the turntable azimuth and antenna height will be adjusted. The turntable azimuth will be slowly varied by +/- 22.5° around this value. During this action the value of emission is continuously measured. The turntable azimuth at the highest emission will be recorded and adjusted. In this position the antenna height is also slowly varied by +/- 25 cm around the antenna height determined. During this action the value of emission is also continuously measured. The antenna height of the highest emission will also be recorded and adjusted. - Detector: Peak – Maxhold - Measured frequencies: in step 1 determined frequencies - IF – Bandwidth: 120 kHz - Measuring time: 100ms - Turntable angle range: –22.5° to +22.5° around the determined value - Height variation range: -0.25 m to +0.25 m around the determined value Step 4: Final measurement (with QP detector) With the settings determined in step 3, the final measurement will be performed: EMI receiver settings for step 4: - Detector: Quasi-Peak(< 1GHz) - Measured frequencies: in step 3 determined frequencies - IF – Bandwidth: 120 kHz - Measuring time: 1 s Measurement above 1 GHz: The following modifications apply to the measurement procedure for the frequency range above 1 GHz: The measurement distance was reduced to 1 m. The results were extrapolated by the extrapolation factor of 20 dB/decade (inverse linear-distance for field strength measurements, inverse-linear-distance-squared for the power density measurements). Due to the fact that in this frequency range a double ridged wave guided horn antenna (up to 18 GHz) and a horn antenna (18–25 GHz) are used, the steps 2-4 as described before, are omitted. Step 1 was performed at one height of the receiving antenna only. Detector: Peak, Average (simultaneously) RBW = VBW = 1 MHz; above 7 GHz 100 kHz Test Requirements / Limits If not stated within the measurement plot and/or test result, class B limits are applied. FCC Part 15, Subpart B, §15.109, Radiated Emission Limits Frequency Range (MHz) Class B Limit (dBµV/m) 30 – 88 40.0 88 – 216 43.5 216 – 960 46.0 above 960 54.0 Frequency Range (MHz) Class A Limit (dBµV/m) / @ 3 m! 30 - 88 49.5 88 - 216 54.0 216 - 960 56.9 above 960 60.0 §15.35(b) ..., there is also a limit on the radio frequency emissions, as measured using instrumentation with a peak detector function, corresponding to 20 dB above the maximum permitted average limit.... Used conversion factor: Limit (dBµV/m) = 20 log (Limit (µV/m)/1µV/m) NOTE: A missing result table in the corresponding test report section means, that no final measurement was performed because no relevant frequencies (peaks) were found in the preliminary scan. Page 23 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 _____________ Setup Drawings _____________ Setup in the Anechoic chamber. For measurements below 1 GHz the ground was replaced by a conducting ground plane. LISN Analyzer Signaling EUT UNIT Setup in the shielded room for conducted measurements at AC mains port Page 24 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 ___________________________________________________________ Correlation of measurement requirements from FCC and IC ___________________________________________________________ Measurement FCC reference IC reference Conducted Emissions §15.107 ICES-001 Issue 4 or (AC Power Line) ICES-003 Issue 5 or RSS- Gen Issue 3 Radiated Spurious Emissions §15.109 ICES-001 Issue 4 or ICES-003 Issue 5 or RSS- Gen Issue 3 Remarks: 1. FCC Part 15 subpart B, ICES 003 and CISPR 22 contain different definitions of Class A and Class B limits, i.e. which class is applicable to which kind of EUT. ICES 003 and CISPR 22 distinguish between the location where the EUT is intended to operate whilst FCC refers to the method of commercial distribution (distributive trades). 2. The correct assignment of the appropriate class to the concrete EUT is not scope of this test report! 3. A radio apparatus that is specifically subject to an Industry Canada Radio Standard Specification (RSS) and which contains an ITE is not subject to ICES-003 provided the ITE is used only to enable operation of the radio apparatus and the ITE does not control additional functions or capabilities. 4. ISM (Industrial, Scientific or Medical) radio frequency generators, though they may contain ITE, are excluded from the definition of ITE and are not subject to ICES-003. They are instead subject to the Interference-Causing Equipment Standard ICES-001, which specifically addresses ISM radio frequency generators. 5. The kind of EUT (ITE, ISM, Radio) determines which IC Standard is applicable. Page 25 of 26

Reference: MDE_PARRO_1430_FCCf According to FCC 47 CFR Ch.1 Part 15 Subpart B, Class B FCC ID: RKXMYKONOS3 IC: 5119A-MYKONOS3 6 Index 1 Administrative Data 2 1.1 Project Data 2 1.2 Applicant Data 2 1.3 Test Laboratory Data 2 1.4 Signature of the Testing Responsible 2 1.5 Signature of the Accreditation Responsible 3 2 Test Object Data 3 2.1 General OUT Description 3 2.2 Detailed Description of OUT Samples 3 2.3 OUT Features 3 2.4 Auxiliary Equipment 4 2.5 Setups used for Testing 4 3 Results 5 3.1 General 5 3.2 List of the Applicable Body 5 3.3 List of Test Specification 5 3.4 Summary 6 3.5 Detailed Results 7 3.5.1 15b.1 Conducted Emissions (AC Power Line) §15.107 7 3.5.2 15b.2 Spurious Radiated Emissions §15.109 10 4 Test Equipment Details 13 4.1 List of Used Test Equipment 13 5 Annex 20 5.1 Additional Information for Report 20 6 Index 26 Page 26 of 26


Document Created: 2015-01-20 17:58:43
Document Modified: 2015-01-20 17:58:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC