Test Report

FCC ID: RKRMX8600

Test Report

Download: PDF
FCCID_2732890

TEST REPORT FCC ID: RKRMX8600 Product: Wireless keyboard and mouse combo Model No.: MX8600 Additional Model: KB5875W, KB5975W, KB5165W, BX9900, BX9930, BX9310, BX7800, BX7900, BX8200, BX9000, BX7000, MX207, MX6600, MX6800, MX6900, MX8800, MX12, MX21, MX22, MX23, MX24, MX25, MX26, MX27, MX28, MX29, MX30, MX31, MX32, MX33, MX34, MX35, MX36, MX3500, MX3600, MX800, MX202, MX262, MX7700 Trade Mark: N/A Report No.: TCT150805E001 Issued Date: Aug. 25, 2015 Issued for: ATEK(CHINA) ELECTRONICS COMPANY LIMITED A2 building, Lianhe Industrial Park, Fengtang Road,Fuyong Town, Baoan district, Shenzhen city, Guangdong province，China Issued By: Shenzhen Tongce Testing Lab. 1F, Leinuo Watch Building, Fuyong Town, Baoan Dist, Shenzhen, China TEL: +86-755-27673339 FAX: +86-755-27673332 Note: This report shall not be reproduced except in full, without the written approval of Shenzhen Tongce Testing Lab. This document may be altered or revised by Shenzhen Tongce Testing Lab. personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 TABLE OF CONTENTS 1. Test Certification....................................................................................... 3 2. Test Result Summary ............................................................................... 4 3. EUT Description ........................................................................................ 5 4. Genera Information................................................................................... 6 4.1. Test Environment and Mode................................................................................. 6 4.2. Description of Support Units................................................................................ 6 5. Facilities and Accreditations ................................................................... 7 5.1. Facilities ................................................................................................................. 7 5.2. Location ................................................................................................................. 7 5.3. Measurement Uncertainty..................................................................................... 7 6. Test Results and Measurement Data ...................................................... 8 6.1. Antenna Requirement ........................................................................................... 8 6.2. Conducted Emission............................................................................................. 9 6.3. Radiated Emission Measurement ...................................................................... 10 6.4. 20dB Occupied Bandwidth ................................................................................. 18 Appendix A: Photographs of Test Setup Appendix B: Photographs of EUT Page 2 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 1. Test Certification Product: Wireless keyboard and mouse combo Model No.: MX8600 Additional KB5875W, KB5975W, KB5165W, BX9900, BX9930, BX9310, Model: BX7800, BX7900, BX8200, BX9000, BX7000, MX207, MX6600, MX6800, MX6900, MX8800, MX12, MX21, MX22, MX23, MX24, MX25, MX26, MX27, MX28, MX29, MX30, MX31, MX32, MX33, MX34, MX35, MX36, MX3500, MX3600, MX800, MX202, MX262, MX7700 Applicant: ATEK(CHINA) ELECTRONICS COMPANY LIMITED Address: A2 building, Lianhe Industrial Park, Fengtang Road,Fuyong Town, Baoan district, Shenzhen city, Guangdong province，China. Manufacturer: ATEK(CHINA) ELECTRONICS COMPANY LIMITED Address: A2 building, Lianhe Industrial Park, Fengtang Road,Fuyong Town, Baoan district, Shenzhen city, Guangdong province，China. Date of Test: Aug. 01- Aug 11, 2015 Applicable FCC CFR Title 47 Part 15 Subpart C Section 15.249 Standards: The above equipment has been tested by Shenzhen Tongce Testing Lab. and found compliance with the requirements set forth in the technical standards mentioned above. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Tested By: Date: Aug. 10, 2015 SKY Reviewed By: Date: Aug. 25, 2015 Joe Zhou Approved By: Date: Aug. 25, 2015 Tomsin Page 3 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 2. Test Result Summary Requirement CFR 47 Section Result Antenna Requirement §15.203 PASS AC Power Line Conducted §15.207 N/A Emission Field Strength of §15.249 (a) PASS Fundamental Spurious Emissions §15.249 (a) (d)/ §15.209 PASS Band Edge §15.249 (d)/ §15.205 PASS 20dB Occupied Bandwidth §15.215 (c) PASS Note: 1. Pass: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. Page 4 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 3. EUT Description Product Name: Wireless keyboard and mouse combo Model : MX8600 KB5875W, KB5975W, KB5165W, BX9900, BX9930, BX9310, BX7800, BX7900, BX8200, BX9000, BX7000, MX207, MX6600, MX6800, MX6900, MX8800, MX12, Additional Model: MX21, MX22, MX23, MX24, MX25, MX26, MX27, MX28, MX29, MX30, MX31, MX32, MX33, MX34, MX35, MX36, MX3500, MX3600, MX800, MX202, MX262, MX7700 Trade Mark: N/A Operation Frequency: 2402-2480MHz Number of Channel: 16 Modulation Technology: GFSK Antenna Type: PCB Antenna Antenna Gain: -2.0dBi Power Supply: DC 3.0V(AAA Battery * 2) All models above are identical in interior structure, electrical Remark: circuits and components, and just model names are different for the marketing requirement. Operation Frequency Each of Channel Channel Frequency Channel Frequency Channel Frequency Channel Frequency 1 2402 MHz 5 2422 MHz 9 2441 MHz 13 2463 MHz 2 2407 MHz 6 2426 MHz 10 2445 MHz 14 2466 MHz 3 2414 MHz 7 2436 MHz 11 2453 MHz 15 2473 MHz 4 2419 MHz 8 2439 MHz 12 2459 MHz 16 2480 MHz Note: In section 15.31(m), regards to the operating frequency range over 10 MHz, the Lowest frequency, the middle frequency, and the highest frequency of channel were selected to perform the test, and the selected channel see below: Channel Frequency The lowest channel 2402MHz The middle channel 2441MHz The Highest channel 2480MHz Page 5 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 4. Genera Information 4.1. Test Environment and Mode Operating Environment: Temperature: 25.0 °C Humidity: 54 % RH Atmospheric Pressure: 1010 mbar Test Mode: Keep the EUT in continuous transmitting by select Engineering mode: channel The sample was placed 1.5m above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. 4.2. Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Equipment Model No. Serial No. FCC ID Trade Name / / / / / Note: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. Page 6 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 5. Facilities and Accreditations 5.1. Facilities The test facility is recognized, certified, or accredited by the following organizations: ● FCC - Registration No.: 572331 Shenzhen Tongce Testing Lab The 3m Semi-anechoic chamber has been registered and fully described in a report with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. ● IC - Registration No.: 10668A-1 The 3m Semi-anechoic chamber of Shenzhen TCT Testing Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing ● CNAS - Registration No.: CNAS L6165 Shenzhen TCT Testing Technology Co., Ltd. is accredited to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration laboratories for the competence of testing. The Registration No. is CNAS L6165. 5.2. Location Shenzhen Tongce Testing Lab Address: 1F, Leinuo Watch Building, Fuyong Town, Baoan Dist, Shenzhen, China Tel: 86-755-36638142 5.3. Measurement Uncertainty The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item MU 1 Conducted Emission ±2.56dB 2 RF power, conducted ±0.12dB 3 Spurious emissions, conducted ±0.11dB 4 All emissions, radiated(<1GHz) ±3.92dB 5 All emissions, radiated(>1GHz) ±4.28dB 6 Temperature ±0.1°C 7 Humidity ±1.0% Page 7 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 6. Test Results and Measurement Data 6.1. Antenna Requirement Standard requirement: FCC Part15 C Section 15.203 /247(c) 15.203 requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 15.247(c) (1)(i) requirement: (i) Systems operating in the 2400-2483.5 MHz band that is used exclusively for fixed. Point-to-point operations may employ transmitting antennas with directional gain greater than 6dBi provided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6dBi. E.U.T Antenna: The EUT antenna is an internal PCB antenna which permanently attached, and the best case gain of the antenna is -2.0dBi. Antenna Page 8 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 6.2. Conducted Emission 6.2.1. Test Specification Test Requirement: FCC Part15 C Section 15.207 Test Method: ANSI C63.4:2014 Frequency Range: 150 kHz to 30 MHz Receiver setup: RBW=9 kHz, VBW=30 kHz, Sweep time=auto Frequency range Limit (dBuV) (MHz) Quasi-peak Average Limits: 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 Test Setup: Test Mode: Transmitting mode with modulation 1. The E.U.T and simulators are connected to the main power through a line impedance stabilization network (L.I.S.N.). This provides a 50ohm/50uH coupling impedance for the measuring equipment. 2. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please Test Procedure: refer to the block diagram of the test setup and photographs). 3. Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.4: 2009 on conducted measurement. The EUT is supplied by 3.0V from AAA battery, so Test Result: Conducted Emission is not applicable. Page 9 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 6.3. Radiated Emission Measurement 6.3.1. Test Specification Test Requirement: FCC Part15 C Section 15.209 Test Method: ANSI C63.4: 2014 and ANSI C63.10:2013 Frequency Range: 9 kHz to 25 GHz Measurement Distance: 3m Antenna Polarization: Horizontal & Vertical Frequency Detector RBW VBW Remark 9kHz- 150kHz Quasi-peak 200Hz 1kHz Quasi-peak Value 150kHz- Quasi-peak 9kHz 30kHz Quasi-peak Value Receiver Setup: 30MHz 30MHz-1GHz Quasi-peak 120kHz 300kHz Quasi-peak Value Peak 1MHz 3MHz Peak Value Above 1GHz Peak 1MHz 10Hz Average Value Frequency Limit (dBuV/m @3m) Remark Limit(Field strength of the 94.00 Average Value fundamental signal): 2400MHz-2483.5MHz 114.00 Peak Value Frequency Limit (dBuV/m @3m) Remark 0.009-0.490 2400/F(KHz) Quasi-peak Value 0.490-1.705 24000/F(KHz) Quasi-peak Value 1.705-30 30 Quasi-peak Value 30MHz-88MHz 40.0 Quasi-peak Value Limit(Spurious Emissions): 88MHz-216MHz 43.5 Quasi-peak Value 216MHz-960MHz 46.0 Quasi-peak Value 960MHz-1GHz 54.0 Quasi-peak Value 54.0 Average Value Above 1GHz 74.0 Peak Value Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at Limit (band edge) : least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. 1. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter camber in below 1GHz, 1.5m above the ground in above 1GHz. The table was rotated 360 degrees to determine the position of the highest radiation. 2. The EUT was set 3 meters away from the Test Procedure: interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. Page 10 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 4. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. For radiated emissions below 30MHz 30MHz to 1GHz Test setup: Above 1GHz Page 11 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 Test results: PASS 6.3.2. Test Instruments ROHDE&SCHW ESPI Test Receiver ESVD 100008 Sept.16 , 2015 ARZ ROHDE&SCHW Spectrum Analyzer FSEM 848597/001 Sept.16 , 2015 ARZ Spectrum Analyzer Agilent N9020A MY49100060 Oct. 21, 2015 EM Electronics Pre-amplifier Corporation EM30265 07032613 Sept.16 , 2015 CO.,LTD Pre-amplifier HP 8447D 2727A05017 Sept.16 , 2015 Loop antenna ZHINAN ZN30900A 12024 Dec.14 , 2015 Broadband Antenna Schwarzbeck VULB9163 340 Sept.16 , 2015 Horn Antenna Schwarzbeck BBHA 9120D 631 Sept.16 , 2015 Horn Antenna Schwarzbeck BBHA 9170 373 Sept.16 , 2015 Coax cable TCT RE-low-01 N/A Sept.15 , 2015 Coax cable TCT RE-high-02 N/A Sept.15 , 2015 Coax cable TCT RE-low-03 N/A Sept.15 , 2015 Coax cable TCT RE-high-04 N/A Sept.15 , 2015 Antenna Mast CCS CC-A-4M N/A N/A Shurple EMI Test Software EZ-EMC N/A N/A Technology Note: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Page 12 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 6.3.3. Test Data Field Strength of Fundamental Frequency Emission PK/AV Horizontal Limits PK/AV Margin (MHz) (dBuV/m) /Vertical (dBuV/m) (dB) 2402 75.93(PK) H 114/94 -18.07 2441 76.32(PK) V 114/94 -17.68 2480 76.51(PK) V 114/94 -17.49 Spurious Emissions Frequency Range (9 kHz-30MHz) Frequency (MHz) Level@3m (dBμV/m) Limit@3m (dBμV/m) -- -- -- -- -- -- -- -- -- -- -- -- Note: 1. Emission Level=Reading+ Cable loss-Antenna factor-Amp factor 2. The emission levels are 20 dB below the limit value, which are not reported. It is deemed to comply with the requirement Page 13 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 Frequency Range (30MHz-1GHz) Horizontal: Page 14 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 Vertical: Note: Measurements were conducted in all channels (high, middle, low), and the worst case (High channel) was submitted only. Page 15 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 Above 1GHz Low channel: 2402 MHz Peak AV Correction Emission Level Frequency Ant. Pol. reading reading Factor Peak limit AV limit Margin (MHz) H/V Peak AV (dBµV) (dBuV) (dB/m) (dBµV/m) (dBµV/m) (dBµV/m) (dBµV/m) (dB) 2370.22 H 45.10 --- -4.20 40.90 --- 74.00 54.00 -13.10 2387.50 H --- 34.24 -4.20 --- 30.04 74.00 54.00 -23.96 4804.00 H 45.47 --- 0.66 46.20 --- 74.00 54.00 -7.87 7206.00 H 40.04 --- 9.50 49.54 --- 74.00 54.00 -4.46 --- --- --- --- --- --- --- --- --- --- 2370.22 V 46.58 --- -4.20 62.74 --- 74.00 54.00 -11.62 2370.22 V --- 35.75 -4.20 --- 47.79 74.00 54.00 -22.45 4804.00 V 46.35 --- 0.66 44.24 --- 74.00 54.00 -6.99 7206.00 V 40.53 --- 9.50 44.89 --- 74.00 54.00 -4.46 --- --- --- --- --- --- --- --- --- --- Middle channel: 2441MHz Peak AV Correction Emission Level Frequency Ant. Pol. Peak limit AV limit Margin reading reading Factor Peak AV (MHz) H/V (dBµV/m) (dBµV/m) (dB) (dBµV) (dBµV) (dB/m) (dBµV/m) (dBµV/m) 4882.00 H 48.45 --- 0.66 49.11 --- 74.00 54.00 -4.89 7323.00 H 41.02 --- 9.50 50.52 --- 74.00 54.00 -3.48 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 4882.00 V 48.64 --- 0.66 44.84 --- 74.00 54.00 -9.16 7323.00 V 40.46 --- 9.50 47.92 --- 74.00 54.00 -6.08 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---- --- --- --- High channel: 2480 MHz Peak AV Correction Emission Level Peak Frequency Ant. Pol. reading reading Factor limit AV limit Margin (MHz) H/V Peak AV (dBµV/m) (dB) (dBµV) (dBµV) (dB/m) (dBµV/m) (dBµV/m) (dBµV/m) 2487.37 H 47.32 --- -7.83 64.82 --- 74.00 54.00 -14.51 2487.37 H --- 36.20 -7.83 --- 45.60 74.00 54.00 -25.63 4960.00 H 45.72 --- 0.66 47.00 --- 74.00 54.00 -7.62 7440.00 H 40.22 --- 9.50 46.88 --- 74.00 54.00 -4.28 --- --- --- --- --- --- --- --- --- --- 2487.37 V 44.23 --- -7.83 36.4 --- 74.00 54.00 -17.60 2487.37 V --- 33.18 -7.83 --- 25.35 74.00 54.00 -28.65 4960.00 V 48.72 --- 0.66 44.84 --- 74.00 54.00 -9.16 7440.00 V 40.35 --- 9.5 47.92 --- 74.00 54.00 -6.08 --- --- --- --- --- --- --- --- --- --- Note: 1. Emission Level=Peak Reading + Correction Factor; Correction Factor= Antenna Factor + Cable loss – Pre-amplifier 2. Margin (dB) = Emission Level (Peak) (dBµV/m)-Average limit (dBµV/m) 3. The emission levels of other frequencies are very lower than the limit and not show in test report. 4. Measurements were conducted from 1 GHz to the 10th harmonic of highest fundamental frequency. 5. Data of measurement shown “---“in the above table mean that the reading of emissions is attenuated more than 20 dB below the limits or the field strength is too small to be measured. Page 16 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 Band Edge Requirement Low channel: 2402 MHz Peak AV Correction Emission Level Frequency Ant. Pol. reading reading Factor Peak limit AV limit Margin (MHz) H/V Peak AV (dBµV) (dBuV) (dB/m) (dBµV/m) (dBµV/m) (dBµV/m) (dBµV/m) (dB) 2400 H 53.96 --- -8.23 45.73 --- 74.00 --- -28.27 2400 H --- 42.65 -8.23 --- 34.42 --- 54.00 -19.58 --- --- --- --- --- --- --- --- --- --- 2400 V 58.9 --- -8.23 50.67 --- 74.00 --- -23.33 2400 V --- 47.08 -8.23 --- 43.85 --- 54.00 -15.15 --- --- --- --- --- --- --- --- --- --- Low channel: 2480MHz Peak AV Correction Emission Level Frequency Ant. Pol. reading reading Factor Peak limit AV limit Margin (MHz) H/V Peak AV (dBµV) (dBuV) (dB/m) (dBµV/m) (dBµV/m) (dBµV/m) (dBµV/m) (dB) 2483.5 H 43.50 --- -7.83 35.67 --- 74.00 --- -38.33 2483.5 H --- 30.28 -7.83 --- 22.45 --- 54.00 -31.55 --- --- --- --- --- --- --- --- --- --- 2483.5 V 43.65 --- -7.83 35.82 --- 74.00 --- -38.18 2483.5 V --- 32.95 -7.83 --- 25.12 --- 54.00 -28.88 --- --- --- --- --- --- --- --- --- --- Note: 1. Emission Level=Peak Reading + Correction Factor; Correction Factor= Antenna Factor + Cable loss – Pre-amplifier 2. Margin (dB) = Emission Level (Peak) (dBµV/m)-Average limit (dBµV/m) 3. The emission levels of other frequencies are very lower than the limit and not show in test report. 4. Measurements were conducted from 1 GHz to the 10th harmonic of highest fundamental frequency. 5. Data of measurement shown “---“in the above table mean that the reading of emissions is attenuated more than 20 dB below the limits or the field strength is too small to be measured. Page 17 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 6.4. 20dB Occupied Bandwidth 6.4.1. Test Specification Test Requirement: FCC Part15 C Section 15.215(c) Test Method: ANSI C63.10: 2013 Limit: N/A 1. According to the follow Test-setup, keep the relative position between the artificial antenna and the EUT. 2. Set to the maximum power setting and enable the EUT transmit continuously. 3. Use the following spectrum analyzer settings for 20dB Bandwidth measurement. Span = approximately 2 to 3 times the 20 dB bandwidth, centered on a hopping channel; RBW≥1% of the 20 dB bandwidth; VBW≥RBW; Sweep = auto; Detector function = peak; Trace = max hold. 4. Measure and record the results in the test report. Test setup: Test Mode: Transmitting mode with modulation Test results: PASS 6.4.2. Test Instruments RF Test Room Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer R&S FSU 200054 Sep. 15, 2015 Note: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Page 18 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 6.4.3. Test data 20dB Occupy Test Channel Limit Conclusion Bandwidth (kHz) Lowest 2332 --- PASS Middle 2332 --- PASS Highest 2436 --- PASS Test plots as follows: Page 19 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com

Report No.: TCT150805E001 Lowest channel * RBW 100 kHz Marker 1 [T1 ] * VBW 100 kHz 91.13 dBµV Ref 107 dBµV * Att 25 dB SWT 2.5 ms 2.401959936 GHz Offset 1 dB ndB [T1] 20.00 dB BW 2.331730769 MHz 100 Temp 1 [T1 ndB] A 1 71.03 dBµV 1 PK 2.400854167 GHz 90 MAXH Temp 2 [T1 ndB] LVL 70.63 dBµV 80 2.403185897 GHz T1 T2 70 60 50 3DB 40 30 20 10 Center 2.402 GHz 500 kHz/ Span 5 MHz Date: 10.AUG.2015 11:43:51 Middle channel * RBW 100 kHz Marker 1 [T1 ] * VBW 100 kHz 92.15 dBµV Ref 107 dBµV * Att 25 dB * SWT 25 ms 2.440951923 GHz Offset 1 dB ndB [T1] 20.00 dB BW 2.331730769 MHz 100 Temp 1 [T1 ndB] A 1 72.35 dBµV 1 PK 2.439846154 GHz 90 MAXH Temp 2 [T1 ndB] LVL 71.82 dBµV 80 2.442177885 GHz T1 T2 70 60 50 3DB 40 30 20 10 Center 2.441 GHz 500 kHz/ Span 5 MHz Date: 10.AUG.2015 11:39:34 Highest channel * RBW 100 kHz Marker 1 [T1 ] * VBW 100 kHz 91.30 dBµV Ref 107 dBµV * Att 25 dB * SWT 25 ms 2.479342949 GHz Offset 1 dB ndB [T1] 20.00 dB BW 2.435897436 MHz 100 Temp 1 [T1 ndB] A 1 71.50 dBµV 1 PK 2.478838141 GHz 90 MAXH Temp 2 [T1 ndB] LVL 72.46 dBµV 80 2.481274038 GHz T1 T2 70 60 50 3DB 40 30 20 10 Center 2.48 GHz 500 kHz/ Span 5 MHz Date: 10.AUG.2015 11:41:39 *****END OF REPORT***** Page 20 of 20 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com


Document Created: 2015-08-31 17:27:10
Document Modified: 2015-08-31 17:27:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC