test report2

FCC ID: RI7XE61

Test Report

Download: PDF
FCCID_1485006

FCC LISTED, REGISTRATION AT4 wireless, S.A. NUMBER: 905266 Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 29590 Campanillas/ Málaga/ España IC LISTED REGISTRATION NUMBER Tel. 952 61 91 00 - Fax 952 61 91 13 IC 4621A-1 MÁLAGA, C.I.F. A29 507 456 Registro Mercantil de Málaga,Tomo 1169, Libro 82, Folio 133, Hoja MA3729 TEST REPORT REFERENCE STANDARD: USA FCC Part 15.247, 15.109 CANADA RSS-210, RSS-Gen Radio Frequency Devices. Operation within the bands 902 - 928 MHz, 2400 -2483.5 MHz, and 5725 - 5850 MHz. Licence-Exempt Radio Apparatus (All Frequency Bands): Category I Equipment. General Requirements and Information for the Certification of Radio Apparatus. NIE........................................................ : 32032RET.004 Firmado digitalmente por Alejandro Llamas Alejandro Llamas Rodríguez Approved by Rodríguez Fecha: 2011.06.10 10:23:59 (name / position & signature) ............... : A. Llamas / RF Lab. Manager +02'00' .......................................................... Elaboration date .................................... : 2011-06-08 Identification of item tested ................ : Module on 2.4 GHz with integrated antenna Trademark ............................................ : Telit Model and/or type reference ................. : ZE61-2.4 LE61-2.4 Serial number ........................................ : FYBK1100010 Other identification of the product ........ : Commercial name: ZE61-2.4 IA LE61-2.4 IA FCC ID: RI7xE61 IC ID: 5131A-xE61 Features ................................................. : 2.4 GHz module with integrated antenna Description ............................................ : Module on 2.4 GHz with integrated antenna Applicant ............................................. : Telit Communications S.p.A. Address.................................................. : Via Stazione di Prosecco, 5/B 34010 -SGONICO (TRIESTE) – ITALY CIF/NIF/Passport................................... : ---- Contact person: Brian Tucker (Quality Manager) Telephone / Fax ..................................... : +1 919 439 7977 / +1 919 840 0337 e-mail: ................................................... : brian.tucker@telit.com Test samples supplier ......................... : Same as applicant Manufacturer ...................................... : TELIT RF TECHNOLOGIES SAS Address.................................................. : Rue Evariste Galois Emerald Square - Bâtiment D, Sophia-Antipolis, FRANCE Contact person: Xavier TATOPOULOS (xavier.tatopoulos@telit.com) Telephone / Fax ..................................... : +33.(0) 4.97.21.33.18 / +33.(0) 4.97.21.33.11 Report Nº(NIE): 32032RET.004 Page 1 of 34 2011-06-10

Test method requested ........................: See Standard Standard ................................................: USA FCC Part 15.247 10-01-09 Edition: Operation within the bands 902 - 928 MHz, 2400 -2483.5 MHz, and 5725 - 5850 MHz: -Section 15.247 Subclause (b). Maximum output power and antenna gain. -Section 15.247 Subclause (d). Band-edge emissions compliance (Transmitter). -Section 15.247 Subclause (d). Emissions radiated (Transmitter). USA FCC Part 15.109: Receiver radiated emission. CANADA RSS-210 Issue 8 (December 2010). CANADA RSS-Gen Issue 3 (December 2010). Guidelines for measurement of Digital Transmission Systems operating under section 15.247 dated March 23, 2005. ANSI C63.10-2009: American National Standard for Testing Unlicensed Wireless Devices. Test procedure .......................................: PEET034: Medidas radioeléctricas a equipos de radio de espectro ensanchado en la banda de 2,4 GHz. Non-standardized test method ...............: N/A Used instrumentation .............................: Last Cal. date Cal. due date Semianechoic Absorber Lined Chamber 1. N.A. N.A. IR 11. BS 2. Control Chamber IR 12.BC N.A. N.A. Hybrid Bilog antenna Sunol Sciences 2008/10 2011/10 3. Corporation JB6 4. Antenna mast EM 1072 NMT N.A. N.A. 5. Rotating table EM 1084-4. ON N.A. N.A. Double-ridge Guide Horn antenna 1-18 6. 2009/03 2012/03 GHz HP 11966E Double-ridge Guide Horn antenna 18- 7. 2008/09 2011/09 40 GHz Agilent 119665J 8. EMI Test Receiver R&S ESIB26 2009/09 2011/09 RF pre-amplifier Miteq JS4-12002600- 9. 2010/07 2012/07 30-5A. 10. Multi Device Controller EMCO 2090 N.A. N.A. 11. Spectrum Analyzer Agilent E4440A 2010/02 2012/02 RF pre-amplifier Miteq AFS5- 12. 2010/07 2012/07 04001300-15-10P-6. 13. RF pre-amplifier Schaffner CPA 9232. 2009/06 2011/06 Report template No. .............................: FDT08_12 IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of AT4 wireless, S.A. Report Nº(NIE): 32032RET.004 Page 2 of 34 2011-06-10

INDEX Competences and guarantees ................................................................................................................ 4 General conditions ................................................................................................................................ 4 Uncertainty............................................................................................................................................ 4 Usage of samples................................................................................................................................... 4 Testing period ....................................................................................................................................... 4 Environmental conditions ..................................................................................................................... 5 Summary ............................................................................................................................................... 6 Remarks and comments ........................................................................................................................ 6 Testing verdicts ..................................................................................................................................... 6 APPENDIX A: Test result .................................................................................................................... 7 Report Nº(NIE): 32032RET.004 Page 3 of 34 2011-06-10

Competences and guarantees AT4 wireless is a laboratory with a measurement facility in compliance with the requirements of Section 2.948 of the FCC rules and has been added to the list of facilities whose measurements data will be accepted in conjuction with applications for Certification under Parts 15 or 18 of the Commission's Rules. Registration Number: 905266. AT4 wireless is a laboratory with a measurement site in compliance with the requirements of RSS 212, Issue 1 (Provisional) and has been added to the list of filed sites of the Canadian Certification and Engineering Bureau. Reference File Number: IC 4621A-1. In order to assure the traceability to other national and international laboratories, AT4 wireless has a calibration and maintenance programme for its measurement equipment. AT4 wireless guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at AT4 wireless at the time of performance of the test. AT4 wireless is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of AT4 wireless. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of AT4 wireless and the Accreditation Bodies. Uncertainty Uncertainty (factor k=2) was calculated according to the AT4 wireless internal document PODT000. Usage of samples Samples undergoing test have been selected by: the client. Sample M/01 is formed by the following elements: Control No. Description Model Serial No. Date of reception 32032F/03 RF module with integral ZE61-2.4 FYBK1100010 29/04/2011 antenna on DIP support 32032/06 Test board B DIGITAL CEB --- 08/12/2010 32032/13 AC/DC adaptor FBC12050 --- 08/12/2010 1. Sample M/01 has undergone following test(s). All tests indicated in appendix A. Testing period The performed test started on 2011-05-04 and finished on 2011-05-06 The tests have been performed at AT4 wireless. Report Nº(NIE): 32032RET.004 Page 4 of 34 2011-06-10

Environmental conditions In the control chamber, the following limits were not exceeded during the test: Temperature Min. = 21.9 ºC Max. = 22.4 ºC Relative humidity Min. = 54.3 % Max. = 55.1 % Shielding effectiveness > 100 dB Electric insulation > 10 kΩ Reference resistance to earth < 0,5 Ω In the semianechoic chamber (21 meters x 11 meters x 8 meters), the following limits were not exceeded during the test. Temperature Min. = 18.5 ºC Max. = 19.3 ºC Relative humidity Min. = 53 % Max. = 55 % Air pressure Min. = 1020 mbar Max. = 1020 mbar Shielding effectiveness > 100 dB Electric insulation > 10 kΩ Reference resistance to earth < 0,5 Ω Normal site attenuation (NSA) < ±4 dB at 10 m distance between item under test and receiver antenna, (30 MHz to 1000 MHz) Field homogeneity More than 75% of illuminated surface is between 0 and 6 dB (26 MHz to 1000 MHz). Report Nº(NIE): 32032RET.004 Page 5 of 34 2011-06-10

Summary Considering the results of the performed test according to standard USA FCC Parts 15.247 and 15.109 / RSS- 210, the item under test is IN COMPLIANCE with the requested specifications specified in the standard. NOTE: The results presented in this Test Report apply only to the particular item under test established in page 1 of this document, as presented for test on the date(s) shown in section, “USAGE OF SAMPLES, TESTING PERIOD AND ENVIRONMENTAL CONDITIONS”. Remarks and comments 1: Test not requested. Only radiated measurements were requested. Testing verdicts Not applicable .................................................... : NA Pass..................................................................... : P Fail ..................................................................... : F Not measured...................................................... : NM FCC PART 15 PARAGRAPH / RSS-210 VERDICT NA P F NM Section 15.247 Subclause (a) (2) / RSS-210 A8.2. (a) 6 dB Bandwidth NM1 Section 15.247 Subclause (b) / RSS-210 A8.4. (4) Maximum radiated output power P .................. and antenna gain Section 15.247 Subclause (d) / RSS-210 A8.5. Emission limitations conducted NM1 .................. (Transmitter) Section 15.247 Subclause (d) / RSS-210 A8.5. Band-edge conducted emissions NM1 .................. compliance (Transmitter) Section 15.247 Subclause (d) / RSS-210 A8.5. Band-edge radiated emissions P .................. compliance (Transmitter) Section 15.247 Subclause (e) / RSS-210 A8.2. (b) Power spectral density NM1 Section 15.247 Subclause (d) / RSS-210 A8.5. Emission limitations radiated P .................. (Transmitter) Section 15.109 / RSS-210 2.5. .................. Radiated emission limits for P .................. receiver 1: See point “Remarks and comments”. Report Nº(NIE): 32032RET.004 Page 6 of 34 2011-06-10

APPENDIX A: Test result Report Nº(NIE): 32032RET.004 Page 7 of 34 2011-06-10

INDEX TEST CONDITIONS .......................................................................................................................................9 Computation of duty-cycle correction factor .....................................................................................................10 Section 15.247 Subclause (b). Maximum output power and antenna gain ............................................................12 Section 15.247 Subclause (d). Band-edge emissions compliance (Transmitter) ....................................................15 Section 15.247 Subclause (d). Emission limitations radiated (Transmitter) ..........................................................17 Section 15.109. Receiver spurious radiation .....................................................................................................28 Report Nº(NIE): 32032RET.004 Page 8 of 34 2011-06-10

TEST CONDITIONS Power supply (V): Vnominal = 12 Vdc Type of power supply = DC voltage from AC/DC adaptor. Type of antenna = Integral chip antennal. TEST FREQUENCIES: Lowest channel: 2405 MHz Middle channel: 2440 MHz Highest channel: 2480 MHz The test set-up was made in accordance to the general provisions of ANSI C63.4: 2009. RADIATED MEASUREMENTS All radiated tests were performed in a semi-anechoic chamber. The measurement antenna is situated at a distance of 3 m for the frequency range 30 MHz-1000 MHz (30 MHz-1000 MHz Bilog antenna) and at a distance of 1m for the frequency range 1 GHz-25 GHz (1 GHz-18 GHz Double ridge horn antenna and 18 GHz-40 GHz horn antenna). For radiated emissions in the range 1 GHz-25 GHz that is performed at a distance closer than the specified distance, an inverse proportionality factor of 20 dB per decade is used to normalize the measured data for determining compliance. The equipment under test was set up on a non-conductive (wooden) platform one meter above the ground plane and the situation and orientation was varied to find the maximum radiated emission. It was also rotated 360º and the antenna height was varied from 1 to 4 meters to find the maximum radiated emission. Measurements were made in both horizontal and vertical planes of polarization. The transmission is pulsed so the average values of transmitter fundamental and spurious emissions are calculated from the measured peak values using the duty cycle correction factor δ as indicated in standard ANSI C63.10-2009. Report Nº(NIE): 32032RET.004 Page 9 of 34 2011-06-10

Computation of duty-cycle correction factor 1. Pulse train length. The pulse train length is > 100 ms 2. Pulse train period and number of pulses within 100 ms. Pulse train period: 40.17 ms Number of pulses within 100 ms: 3 Report Nº(NIE): 32032RET.004 Page 10 of 34 2011-06-10

3. Pulse duration. Pulse duration: 3.5 ms 4. Duty-cycle correction factor calculation. Sub-pulse Duration (ms) Number of pulses Sub-pulse “On Time” (ms) 1 3.5 3 10.5 TOTAL ON TIME: 10.5 Duty cycle correction factor δ = 10.5 / 100 = 0.105 δ = 20 log (0.105) = -19.58 dB Report Nº(NIE): 32032RET.004 Page 11 of 34 2011-06-10

Section 15.247 Subclause (b). Maximum output power and antenna gain SPECIFICATION For systems using digital modulation in the 2400-2483.5 MHz band: 1 watt (30 dBm). RESULTS MAXIMUM OUTPUT POWER (RADIATED). See next plots. Lowest frequency Middle frequency Highest frequency 2405 MHz 2440 MHz 2480 MHz Maximum EIRP power (dBm) 13.69 14.76 11.22 Measurement uncertainty (dB) ±4.0 Verdict: PASS Report Nº(NIE): 32032RET.004 Page 12 of 34 2011-06-10

Lowest frequency Middle frequency Report Nº(NIE): 32032RET.004 Page 13 of 34 2011-06-10

Highest frequency Report Nº(NIE): 32032RET.004 Page 14 of 34 2011-06-10

Section 15.247 Subclause (d). Band-edge emissions compliance (Transmitter) SPECIFICATION Emissions outside the frequency band in which the intentional radiator is operating shall be at least 20dB below the highest level of the desired power. RESULTS: Band-edge compliance of radiated emissions Maximum peak and average field strength of fundamental emission at 3 m distance. HIGHEST CHANNEL Maximum field strength at 3 m. Peak value. Note: The correction factor is already included in the spectrum analyzer as a transducer factor so that the marker shows directly the field strength level. Report Nº(NIE): 32032RET.004 Page 15 of 34 2011-06-10

Maximum field strength at 3 m. Average value. E-Field at 3m Peak (dBµV/m) Duty-cycle correction factor δ (dB) Corrected E-Field at 3m Average (dBµV/m) 105.05 -19.58 85.47 BAND-EDGE COMPLIANCE. RADIATED. Marker-Delta Method. Note: No correction is applied for this relative measurement. Band edge compliance of radiated emissions Fundamental max. average value Delta value Calculated value 3 m Limit 3m 85.47 dBµV/m 47.12 dB 38.35 54 dBµV/m Fundamental max. Peak value 3 m Delta value Calculated value 3 m Limit 105.05 dBµV/m 47.12 dB 57.93 74 dBµV/m Verdict: PASS Report Nº(NIE): 32032RET.004 Page 16 of 34 2011-06-10

Section 15.247 Subclause (d). Emission limitations radiated (Transmitter) SPECIFICATION Radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)): Frequency Range Field strength (µV/m) Field strength Measurement (MHz) (dBµV/m) distance (m) 0.009-0.490 2400/F(kHz) - 300 0.490-1.705 24000/F(kHz) - 300 1.705 - 30.0 30 - 30 30 - 88 100 40 3 88 - 216 150 43.5 3 216 - 960 200 46 3 960 - 25000 500 54 3 The emission limits shown in the above table are based on measurements employing CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector. For average radiated emission measurements above 1000 MHz, there is also a limit corresponding to 20 dB above the indicated values in the table is specified when measuring with peak detector function. RESULTS: The situation and orientation was varied to find the maximum radiated emission. It was also rotated 360º and the antenna height was varied from 1 to 4 meters to find the maximum radiated emission. Measurements were made in both horizontal and vertical planes of polarization. All tests were performed in a semi-anechoic chamber at a distance of 3 m for the frequency range 30 MHz-1000 MHz and at distance of 1m for the frequency range 1 GHz-25 GHz. The field strength is calculated by adding correction factor to the measured level from the spectrum analyzer. This correction factor includes antenna factor, cable loss and pre-amplifiers gain. The transmission is pulsed so the average values of transmitter fundamental and spurious emissions are calculated from the measured peak values using the duty cycle correction factor δ as indicated in standard ANSI C63.10-2009. Report Nº(NIE): 32032RET.004 Page 17 of 34 2011-06-10

Frequency range 30 MHz-1000 MHz. Note: The spurious emissions below 1 GHz do not depend on the operating channel selected in the EUT. Spurious levels operating (radiated) closest to limit. Spurious frequency Polarization Detector Emission Level Measurement (MHz) (dBµV/m) Uncertainty (dB) 51.3828 V Quasi-peak 23.31 ±3.8 96.0922 V Quasi-peak 26.31 ±3.8 121.3627 V Quasi-peak 29.14 ±3.8 154.4088 V Quasi-peak 34.94 ±3.8 168.0160 V Quasi-peak 31.41 ±3.8 181.6232 V Quasi-peak 29.68 ±3.8 208.8377 V Quasi-peak 27.99 ±3.8 234.1082 V Quasi-peak 30.07 ±3.8 Frequency range 1 GHz-25 GHz 1. CHANNEL: LOWEST. Spurious frequency Polarization Emission Level Duty-cycle correction Corrected Emission Level (MHz) (dBµV/m) Peak factor δ (dB) (dBµV/m) Average 4809.8833 H 60.42 -19.58 40.84 7213.5835 H 66.60 -19.58 47.02 7216.4333 H 66.15 -19.58 46.57 9617.9837 V 60.61 -19.58 41.03 9621.8505 V 60.11 -19.58 40.53 12022.4005 H 55.56 -19.58 35.98 12027.6507 H 55.22 -19.58 35.64 14426.8670 H 54.71 -19.58 35.13 14432.9007 H 54.25 -19.58 34.67 Report Nº(NIE): 32032RET.004 Page 18 of 34 2011-06-10

2. CHANNEL: MIDDLE Spurious frequency Polarization Emission Level Duty-cycle correction Corrected Emission Level (MHz) (dBµV/m) Peak factor δ (dB) (dBµV/m) Average 4880.7343 H 57.88 -19.58 38.30 7318.4675 H 65.37 -19.58 45.79 7321.4677 H 65.67 -19.58 46.09 9757.9505 H 55.33 -19.58 35.75 9761.7833 H 55.11 -19.58 35.53 12197.4335 V 52.19 -19.58 32.61 12202.4007 V 51.98 -19.58 32.40 14637.0500 H 53.17 -19.58 33.59 14643.1330 H 53.36 -19.58 33.78 3. CHANNEL: HIGHEST Spurious frequency Polarization Emission Level Duty-cycle correction Corrected Emission Level (MHz) (dBµV/m) Peak factor δ (dB) (dBµV/m) Average 4959.8503 H 54.89 -19.58 35.31 7438.6001 H 64.72 -19.58 45.14 7441.4500 H 65.01 -19.58 45.43 9917.9175 H 63.10 -19.58 43.52 9921.9333 H 63.25 -19.58 43.67 12397.4003 V 55.52 -19.58 35.94 12402.4005 V 55.36 -19.58 35.78 14876.9180 H 51.16 -19.58 31.58 14882.9330 H 51.23 -19.58 31.65 Measurement Uncertainty (dB): ± 4.0 dB. Verdict: PASS Report Nº(NIE): 32032RET.004 Page 19 of 34 2011-06-10

FREQUENCY RANGE 30 MHz-1000 MHz. (This plot is valid for all three channels). Report Nº(NIE): 32032RET.004 Page 20 of 34 2011-06-10

FREQUENCY RANGE 1 GHz to 3 GHz. CHANNEL: Lowest (2405 MHz). Note: The peak shown in the plot is the carrier frequency. CHANNEL: Middle (2440 MHz). Note: The peak shown in the plot is the carrier frequency. Report Nº(NIE): 32032RET.004 Page 21 of 34 2011-06-10

CHANNEL: Highest (2480 MHz). Note: The peak shown in the plot is the carrier frequency. FREQUENCY RANGE 3 GHz to 12.75 GHz. CHANNEL: Lowest (2405 MHz). Report Nº(NIE): 32032RET.004 Page 22 of 34 2011-06-10

CHANNEL: Middle (2440 MHz). CHANNEL: Highest (2480 MHz). Report Nº(NIE): 32032RET.004 Page 23 of 34 2011-06-10

FREQUENCY RANGE 12.75 GHz to 18 GHz. CHANNEL: Lowest (2405 MHz). CHANNEL: Middle (2440 MHz). Report Nº(NIE): 32032RET.004 Page 24 of 34 2011-06-10

CHANNEL: Highest (2480 MHz). FREQUENCY RANGE 18 GHz to 25 GHz. (This plot is valid for all three channels). Report Nº(NIE): 32032RET.004 Page 25 of 34 2011-06-10

FREQUENCY RANGE 2.31 GHz to 2.39 GHz. (RESTRICTED BAND) (This plot is valid for all three channels). FREQUENCY RANGE 2.4835 GHz to 2.5 GHz. (RESTRICTED BAND) (This plot is valid for the lowest and middle channels). Report Nº(NIE): 32032RET.004 Page 26 of 34 2011-06-10

CHANNEL: Highest (2480 MHz). Report Nº(NIE): 32032RET.004 Page 27 of 34 2011-06-10

Section 15.109. Receiver spurious radiation SPECIFICATION The field strength shall not exceed the following values: Frequency Range Field strength (µV/m) Field strength Measurement (MHz) (dBµV/m) distance (m) 0.009-0.490 2400/F(kHz) - 300 0.490-1.705 24000/F(kHz) - 300 1.705 - 30.0 30 - 30 30 - 88 100 40 3 88 - 216 150 43.5 3 216 - 960 200 46 3 960 - 25000 500 54 3 The emission limits shown in the above table are based on measurements employing CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector. For average radiated emission measurements above 1000 MHz, there is also a limit corresponding to 20 dB above the indicated values in the table is specified when measuring with peak detector function. RESULTS: The situation and orientation was varied to find the maximum radiated emission. It was also rotated 360º and the antenna height was varied from 1 to 4 meters to find the maximum radiated emission. Measurements were made in both horizontal and vertical planes of polarization. All tests were performed in a semi-anechoic chamber at a distance of 3 m for the frequency range 30 MHz-1000 MHz and at distance of 1m for the frequency range 1 GHz-25 GHz. The field strength is calculated by adding correction factor to the measured level from the spectrum analyser. This correction factor includes antenna factor, cable loss and pre-amplifiers gain. Report Nº(NIE): 32032RET.004 Page 28 of 34 2011-06-10

Frequency range 30 MHz-1000 MHz. Note: The spurious emissions below 1 GHz do not depend on either the receiving channel. Spurious levels operating (radiated) closest to limit. Spurious frequency Polarization Detector Emission Level Measurement (MHz) (dBµV/m) Uncertainty (dB) 51.3828 V Quasi-peak 23.11 ±3.8 96.0922 V Quasi-peak 24.08 ±3.8 121.3627 V Quasi-peak 25.20 ±3.8 154.4088 V Quasi-peak 32.25 ±3.8 166.0721 V Quasi-peak 29.19 ±3.8 181.6232 V Quasi-peak 27.85 ±3.8 212.7254 V Quasi-peak 25.55 ±3.8 236.0521 V Quasi-peak 24.74 ±3.8 Frequency range 1 GHz-25 GHz. 1. CHANNEL: LOWEST (2402 MHz). Spurious frequency Polarization Detector Emission Level Measurement (MHz) (dBµV/m) Uncertainty (dB) 4809.9503 V Peak 42.02 ± 4.0 4809.9503 V Average 37.55 ± 4.0 2. CHANNEL: MIDDLE (2441 MHz). Spurious frequency Polarization Detector Emission Level Measurement (MHz) (dBµV/m) Uncertainty (dB) 4880.1177 V Peak 44.36 ± 4.0 4880.1177 V Average 39.73 ± 4.0 3. CHANNEL: HIGHEST (2480 MHz). Spurious frequency Polarization Detector Emission Level Measurement (MHz) (dBµV/m) Uncertainty (dB) 4960.0175 V Peak 44.88 ± 4.0 4960.0175 V Average 38.33 ± 4.0 Verdict: PASS. Report Nº(NIE): 32032RET.004 Page 29 of 34 2011-06-10

FREQUENCY RANGE 30 MHz-1000 MHz. (This plot is valid for all three channels). Report Nº(NIE): 32032RET.004 Page 30 of 34 2011-06-10

FREQUENCY RANGE 1 GHz-12.75 GHz. CHANNEL: Lowest (2405 MHz). CHANNEL: Middle (2440 MHz). Report Nº(NIE): 32032RET.004 Page 31 of 34 2011-06-10

CHANNEL: Highest (2480 MHz). FREQUENCY RANGE 12.75 GHz-18 GHz. (This plot is valid for all three channels). Report Nº(NIE): 32032RET.004 Page 32 of 34 2011-06-10

FREQUENCY RANGE 18 GHz-25 GHz. (This plot is valid for all three channels). Report Nº(NIE): 32032RET.004 Page 33 of 34 2011-06-10

FREQUENCY RANGE 2.31 GHz to 2.39 GHz. (RESTRICTED BAND) (This plot is valid for all three channels). FREQUENCY RANGE 2.4835 GHz to 2.5 GHz. (RESTRICTED BAND) (This plot is valid for all three channels). Report Nº(NIE): 32032RET.004 Page 34 of 34 2011-06-10


Document Created: 2011-06-10 10:24:00
Document Modified: 2011-06-10 10:24:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC