07b_Cover Letter_modular approval_Statement

FCC ID: RI7UE866N3

Cover Letter(s)

Download: PDF
FCCID_2625721

Telit Communications $.p.A. Receiver Federal Communication Commission Equipment Authorization Division, parzialmente, né reso noto a terzi senza preventiva autorizzazione scritta diTelit Communications $.p.A. Application Processing Branch 7435 Oakland Mills Road Documentazione riservata. Questo documento non pu6 essere riprodotto, anche Columbia, MD 21048 Certification and Engineering Bureau Industry Canada Tuth i diritl sono tutelati a norma di legge. Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 Subject: Modular Approval Statement Date: 2015—04—20 FCC Certification Number: RIZUES8G6N3 Only applicable for IC certification: IC Company Number: 5131A UPN: UES8G6GN3 HVIN: (Hardware Version OHO PMN: (Product Marketing UES866—N3G Identification Number) Name) nor its contents revealed in any manner to others without the express written permission of Telit Communications S.p.A. Restricted document. No part of this document can be reproduced or copied in anyformat, in part or totally, TO WHOM IT MAY CONCERN Pursuant to Paragraphs RSP—100 Issue 10 November 2014 iItem 7.3 and CFR § 15.212, we herewith declare for our module. Modular approval requirement Yes No (a) The radio elements must have the radio frequency circuitry be All rights reserved. shielded. Physical/discrete and tuning capacitors may be located X external to the shield, but must be on the module assembly. (b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable RSS standard under conditions of excessive data rates or over—modulation. (c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the X design of the power supplying circuitry in the host device which houses the module. (d) The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module. Page 1 of 2 MOD. 106 04/09 Rev.0 CONFIDENTIAL

'I/'elit \ Communications $pA | (e) The module shall be tested for compliance with the applicable standard in a stand—alone configuration, i.e. the module must not be | inside another device during testing. (f) The module shall comply with the Category | equipment labeling $ p A. requirements and CFR § 15.212(a)(1)(vi). pr eventva avtonzzazone scrita diTelt Communications (g) The module shall comply with applicable RSS—102 exposure bevtaimmaciebotd TZEmemto non pud essere nprodtto, anche requirements and any applicable FCC RF exposure requirement which | are based on the intended use/configurations. Only applicable for IC certification: K1 Tull i dirth sono tutelat a norma dilegge (h) is the modular device for an Industry Canada licensed exempt service? Only applicable for FCC certification: (i) The modular transmitter complies with all applicable FCC rules. Instructions for maintaining compliance are given in the user instructions. parzialmente, nd. reso noto a terzi senza s Note 1: The module is for use in equipment that is subject to licensing. If you have any questions, please feel free to contact us at the address shown below Best Regards, ofTelt CommunicationsS pA. M Antonino Sgroi writien permission EMEA R&D Manager To ie memenee rereemi m onmariter i6 oers wthout the express Al rights reserved. Page 2 of 2 MOD. 106 04/09 Rev.0 CONFIDENTIAL


Document Created: 2015-04-22 08:52:29
Document Modified: 2015-04-22 08:52:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC