11_RF Expsoure Info

FCC ID: RI7UE866N3

RF Exposure Info

Download: PDF
FCCID_2605803

TEST REPORT No.: 6-0608-14-1-4b According to: FCC Regulations Part 2.1091 IC-Regulations RSS-102, Issue 5 for Telit Communications S.p.A. 3G module UE866-N3G FCC-ID: RI7UE866N3 IC: 5131A-UE866N3 PMN: UE866-N3G HVIN: 0H0 Laboratory Accreditation and Listings Voluntary Controls for Industry Canada Electromagnetic Emissions Reg. No.: 3462D-1 Reg. No.: Reg. No.: 736496 Reg. No.: 3462D-2 MRA US-EU 0003 R-2666 C-2914, Reg. No.: 3462D-3 T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: info@cetecom.com • Internet: www.cetecom.com Page 1 of 22 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM

Test Report 6-0608-14-1-4b, Page 2 of 22 Table of contents 1. SUMMARY OF TEST RESULTS...................................................................................................................... 3 1.1. TX mode, tests overview FCC Part 2.1091 ..................................................................................................... 3 2. ADMINISTRATIVE DATA ............................................................................................................................... 4 2.1. Identification of the testing laboratory ............................................................................................................. 4 2.2. Test location .................................................................................................................................................... 4 2.3. Organizational items ........................................................................................................................................ 4 2.4. Applicant’s details ........................................................................................................................................... 4 2.5. Manufacturer’s details ..................................................................................................................................... 4 3. EQUIPMENT UNDER TEST (EUT) ................................................................................................................. 5 3.1. TECHNICAL DESCRIPTION OF MAIN EUT ............................................................................................. 5 3.2. EUT: Type, S/N etc. and short descriptions used in this test report ................................................................ 6 3.3. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions .................................................................. 6 3.4. EUT set-ups ..................................................................................................................................................... 6 3.5. EUT operating modes .................................................................................................................................... 7 3.6. Configuration of cables used for testing .......................................................................................................... 7 4. MEASUREMENTS ............................................................................................................................................. 8 4.1. Radio Frequency Exposure Evaluation §2.1091 .............................................................................................. 8 4.2. Results for fixed and mobile operations .......................................................................................................... 10 4.3. Conclusion for maximum admissible antenna gain (FCC only) ...................................................................... 14 4.4. Canada RSS-102, Issue 5 regulations .............................................................................................................. 15 4.5. Measurement uncertainties .............................................................................................................................. 16 5. ABBREVIATIONS USED IN THIS REPORT ................................................................................................. 16 6. ACCREDITATION DETAILS OF CETECOM’S LABORATORIES AND TEST SITES ......................... 17 7. INSTRUMENTS AND ANCILLARY ................................................................................................................ 18 7.1. Used equipment “CTC” ................................................................................................................................... 18 8. VERSIONS OF TEST REPORTS (CHANGE HISTORY) ............................................................................. 22 Table of annex Total pages Annex 1: External EUT photographs – separate document TR6-0608-14-1-4a-A1 5 The listed attachments are an integral part of this report. TR6-0608-14-1-4b

Tm Test Report 6—0608—14—1—4b, Page 3 of22 ctrtcom 1. Summary of test results The test results apply exclusively to the test samples as presented in this Report. The CETECOM GmbH does not assume responsibility for any conclusions and generalizations taken in conjunction with other specimens or samples of the type of the item presented to tests. 1.1. TX mode, tests overview FCC Part 2.1091 No. of References & Limits EUT 4 Test EUT Diagram Port FCC 4 hok op— Result Cases RSS Section Test limits set—up group Standard mode Antenna RF Power ; g Passed ~ (conducted) terminal §2.1046 T WA 2 142 Remark 1 (conducted) §2.1046 RSS—132: 5.4 L RFPower Capimg, §22.913@0@) SRSP—503: 5.13 |_=" WAtERP ; ;;, Passed (radiated) < RSS—133:4.1/6.4 Remark 1 §24.232(c) LSRSP.S10:5.1.2 <2Watt (EIRP) Radio , frequency § : & —— Exposure Cabinet §e RSS—102, Issue 5 Feg: §11310 3 1+2 Passed ; §2.1091 Table 1 Evaluation (MPE) Remark: 1.) See separate test report TR6—0608—14—1—4a This report does not take into consideration a possible collocation with other transmitters (ex. BT, Wi—Fi, etc.). Lower antenna gain will be the result. Dipl.—Ing. Rachid Acharkaoui Dipl.Ing. Christian Lorenz Responsible for test section Responsible for test report TR6—0608—14—1—4b

Test Report 6-0608-14-1-4b, Page 4 of 22 2. Administrative Data 2.1. Identification of the testing laboratory Company name: CETECOM GmbH Address: Im Teelbruch 116 45219 Essen - Kettwig Germany Responsible for testing laboratory: Dipl.-Ing. Rachid Acharkaoui Deputy: Dipl.-Ing. Niels Jeß 2.2. Test location 2.2.1. Test laboratory “CTC” Company name: see chapter 2.1. Identification of the testing laboratory 2.3. Organizational items Responsible for test report: Martin Nunier Responsible project leader: Dipl.-Ing. N. Perez Receipt of EUT: 2015-02-09 Date(s) of test: 2015-02-09 – 2015-03-31 Date of report: 2015-04-20 ----------------------------------------------------------------------------------------------------------------------------------------------------- Version of template: 13.01 2.4. Applicant’s details Applicant’s name: Telit Communications S.p.A. Address: Via Stazione di Prosecco, 5/B 34010 SGONICO (TS) Italy Contact person: Mr. Fabrizio Druscovich 2.5. Manufacturer’s details Manufacturer’s name: please see Applicant's details Address: please see Applicant's details TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 5 of 22 3. Equipment under test (EUT) 3.1. TECHNICAL DESCRIPTION OF MAIN EUT W-CDMA : TX-frequency range FDD Band 2: 1852.4–1907.6 MHz (Uplink), 1930-1990 MHz (Downlink) FDD Band 5: 826.4-846.6 MHz (Uplink), 869-894 MHz (Downlink) Type of modulation FDD-Mode Release99: QPSK FDD Mode Release 5+6: 16QAM additional Number of channels FDD Band 2: UARFCN range 9262 – 9400 – 9538 FDD Band 5: UARFCN range 4132 – 4183 – 4233 UMTS-HSPA connectivity  Uplink speed: 5.76 Mb/s (category 6)  Uplink speed: Band II Channel 9262/ 9400/ 9538 Test Channels Band V Channel 4132/ 4183/ 4233 Emission designator(s) Band II: 4M17F9W Band V: 4M17F9W  Value: 2.14 dBi according data sheet Antenna Gain Tx (main)  No information from customer Power supply  3.8 V Special EMI components -- EUT sample type  Production  Pre-Production  Engineering MAX PEAK Output Power: Conducted FDD-Mode 2 22.54 dBm (AV) FDD-Mode 5 22.37 dBm (AV) TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 6 of 22 3.2. EUT: Type, S/N etc. and short descriptions used in this test report Short S/N HW SW descrip- EUT Type serial number hardware status software status tion*) IMEI EUT A UE866-N3G 3G module 359335059003 0 12.00.806 548 *) EUT short description is used to simplify the identification of the EUT in this test report. 3.3. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions AE S/N HW SW short Auxiliary Equipment Type serial number hardware status software status descrip- tion *) AE 1 Bearer Board #1 - 1634900047 - - AE 2 Bearer Board #2 - 113920140091 - - Ktec AE 3 KSAS0151200125D5 -- -- -- AC/DC charger AE 4 USB cable Highspeed USB 2.0 -- -- -- 900-1800- UMTS Cable AE 5 Antenna T-AT314-BU -- -- RG 174mm. 2500 *) AE short description is used to simplify the identification of the auxiliary equipment in this test report. 3.4. EUT set-ups EUT set-up Combination of EUT and AE Remarks no.*) EUT A + AE 1 + AE 2 + AE 3 + AE 4 + set. 1 Used for radiated tests AE 5 + AE 5 set. 2 EUT A + AE 1 + AE 2 Used for conducted tests set. 3 EUT A Not tested: used for MPE calculation *) EUT set-up no. is used to simplify the identification of the EUT set-up in this test report. TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 7 of 22 3.5. EUT operating modes 3.5.1. EUT operating modes W-CDMA EUT Description of Additional information: operating operating modes: mode no.*) A communication link is established between the mobile station (UE) and the test simulator. The transmitter is operated on its maximum rated output FDD-Band 2 power class: 24dBm nominal. op. 1 The input signal to the receiver is modulated with normal test modulation. 12.2 kbps RMC The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link according Table E5.1/Table E5.1A as described in 3GPP TS34.121, Annex E. A communication link is established between the mobile station (UE) and the test simulator. The transmitter is operated on its maximum rated output FDD-Band 5 power class: 24dBm nominal. op. 2 The input signal to the receiver is modulated with normal test modulation. 12.2 kbps RMC The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link according Table E5.1/Table E5.1A as described in 3GPP TS34.121, Annex E. *) EUT operating mode no. is used to simplify the test report. 3.6. Configuration of cables used for testing Cable S/N HW Cable length number Item Type serial number hardware status Cable 1 -- -- -- -- -- Remark: no cable used TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 8 of 22 4. Measurements 4.1. Radio Frequency Exposure Evaluation §2.1091 4.1.1. Test location and equipment (for reference numbers please see chapter 'List of test equipment') test location  CETECOM Essen (Chapter. 2.2.1)  Please see Chapter. 2.2.2  Please see Chapter. 2.2.3 For Evaluation instruments are not needed. Results are determined by calculation. 4.1.2. Requirements The criteria used for the evaluation of human exposure to radio frequency radiation is table 1 according FCC §1.1310 and table chapter 4.2 of RSS-102 standard and it is subject for evaluation of the RF exposure prior to FCC: §1.1310 equipment authorization. As the mobile equipment is authorized under Part 22 (Subpart H) and Part 24 of the FCC Rules, it is subject for evaluation of the RF exposure prior to equipment authorization. Further information on evaluating compliance with these limits can be found in the FCC’s OST/OET Bulletin Number 65, ‘‘Evaluating Compliance with FCC-Specified Guidelines for Human Exposure to Radiofrequency Radiation.’’ For purposes of these requirements mobile devices are defined by the FCC as transmitters designed to be used FCC § 2.1091 in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between radiating structures and the body of the user or nearby persons. These devices are normally evaluated for exposure potential with relation to the MPE limits given in Table 1 of Appendix A. Table 1: LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency range Electric field strength Magnetic field strength Power density Averaging time [MHz) [V/m] [A/m] [mW/cm²] [minutes] 30 - 300 61.4 0.163 1.0 6 300 - 1500 - f/300 6 1500 - 100,000 - 5 6 (B) Limits for General Population / Uncontrolled Exposure 0.3 – 1.34 614 1.63 *(100) 30 1.34 – 30 824/f 2.19/f *(180/f²) 30 30 - 300 27.5 0.073 0.2 30 300 - 1500 - - f/1500 30 1500 – 100,0 - - 1.0 30 For given power density limit at a single frequency (accord. Table 1 Limits) the maximum antenna gain can be calculated. The used equation to predict the power density in the far-field of one single radiating antenna can be made by following equation: EIRP P  G S  4R 2 4R 2 S  4R 2 GNUMERIC  P TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 9 of 22 4.1.3. FCC General Limits: Cellular Radiotelephone Service (subpart H of part 22) FCC: §1.1307 Non-building-mounted antennas: height above ground level to lowest point of antenna < 10 m and total power of all channels > 1000 W ERP (1640 W EIRP) Personal Communications Services (part 24) FCC §1.1307 Broadband PCS (subpart E): non-building-mounted antennas: height above ground level to lowest point of antenna < 10 m and total power of all channels > 2000 W ERP (3280 W EIRP) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Table 1(B) Limits for General Population/Uncontrolled Exposure FCC §1.1310 300–1500 MHz: f/1500 mW/cm² 1500–100,000 MHz: 1.0 mW/cm² Subject to routine evaluation is required when the device operate at frequencies of 1.5 GHz or below and their FCC §2.1091 effective radiated power (ERP) is 1.5 watts or more, or if they operate at frequencies above 1.5 GHz and their ERP is 3 watts or more. (a) Base stations are limited to 1640 watts peak equivalent isotropically radiated power (e.i.r.p.) with an FCC §24.232 antenna height up to 300 meters HAAT. b) Mobile/portable stations are limited to 2 watts e.i.r.p. peak power, … (a) Maximum ERP. The effective radiated power (ERP) of base transmitters and cellular repeaters must not FCC §22.913 exceed 500 Watts. The ERP of mobile transmitters and auxiliary test transmitters must not exceed 7 Watts. FCC §27.50 (10) Portable stations (hand-held devices) are limited to 3 watts ERP (C )(10) (4) Fixed, mobile, and portable (hand-held) stations operating in the 1710-1755 MHz band are limited to 1 FCC §27.50(d) watt EIRP. (2) Mobile and other user stations. Mobile stations are limited to 2.0 watts EIRP. All user stations are limited FCC §27.50(h) to 2.0 watts transmitter output power. 4.1.4. Measurement method Valid for W-CDMA Mode: • The power was checked on 3 frequencies (lowest/middle/highest) within the operable FDD-band (see separate report for W-CDMA technology) and the results compared to applicant’s declared power values (tune-up info). A RMS detector was used. • No duty-cycle correction factor is applicable Please find in the following tables the calculations based on applicants tune-up information (document Power Tune up procedure for UE866 Products Family, Rel. 1, dated 2015-01-12, Internal Telit Code: 30439NT11303A) for the power values. Also the maximum admissible allowed antenna gain for shown application is calculated not exceeding the MPE limit for fixed and mobile operations. TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 10 of 22 4.2. Results for fixed and mobile operations 4.2.1. Results for lower operational band: WCDMA Band V 4.2.1.1. MPE results for FCC For MPE calculations the declared conducted output power are used. See Tune-up declaration from manufacture (document Power Tune up procedure for UE866 Products Family, Rel. 1, dated 2015-01-12). Operating Frequency Declared Max. Maxim um Duty Declared Equivalent Mode on channel m axim um positive output pow er cycle Maxim um conducted conducted tolerance (declared+ conducted output output according Tune-up) output pow er pow er m anfacturer pow er (m axim um conducted (MHz) (dBm ) [W] output (dBm ) (dB) pow er 23.00 24.00 includ. WCDMA 826.4 0.2512 251.19 FDD Band 5 836.4 23.00 1.00 24.00 100% 0.2512 251.19 (RMS-Value) 23.00 24.00 846.6 0.2512 251.19 Maxim um calculated MPE value: MPE-Lim it: 0.551 [m W/cm ^2] Highest MPE 0.050 [m W/cm ^2] value: Margin to lim it 0.501 [m W/cm ^2] Remark: based on 0dBd antenna gain and additional path loss of 0dB TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 11 of 22 4.2.1.2. Max. antenna gain calculations accord. FCC-regulations Based on valid limits on ERP/EIRP and max. MPE the maximum antenna gain which can be used for the specific application is calculated. Maximum antenna gain considerations for fixed/mobile operations for complying with limits: Maximum pow er delivery at RF-Pad from Module incl. Duty cycle [m W]: POUT 251.19 (Avg. Burst Pow er or RMS) Atten-Pad Attenuation - Path Loss 0.0 PANT Resulting delivered Pow er at antenna input [m W] 251.19 R Safety distance [cm ]: 20.00 MPE limit acc. §1.1310 and RSS-102 for uncontrolled exposure [m W/cm ²]: S 0.55 (FCC use mW/cm² & IC use W/m²) G1 Maximum Antenna gain to comply w ith MPE limit [dBi]: 10.42 (For G1 the low est measured channel to reach minimum ant. Gain selected) ERP pow er limit according to §2.1091 [W]: 1.50 (Avg. Burst Pow er or RMS) G2 Max. Antenna gain to comply w ith limit incl. Duty cycle [dBi]: 9.91 (For G2 select the max. Avg. Burst Pow er or RMS value incl. Duty cycle) ERP pow er limit according to §22.913 [W ERP]: 7.00 G3 Max. Antenna gain to comply w ith limit [dBi]: 16.55 (For G3 select the max. Average burst pow er value excluding Duty cycle) G 850MHz-Band Min (G1, G2, G3) [dBi] 9.91 Sum m arized The max. ant. gain for mobile operation at 850 MHz band to comply w ith MPE and 7.76 results: ERP limits incl. External path loss for show n application shall not exceed [dBd]: TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 12 of 22 4.2.2. Results for upper operational band: WCDMA Band II 4.2.2.1. MPE FCC results For MPE calculations the declarated conducted output power are used. See Tune-up declaration from manufacture (document Power Tune up procedure for UE866 Products Family, Rel. 1, dated 2015-01-12). Operation Frequency Declared Max. positive Declared Duty cycle Declared Equivalent Mode on channel m axim um tolerance m axim um Maxim um conducted output conducted according output pow er conducted pow er (m axim um output m anfacturer (Measured+ output pow er conducted output pow er Tune-up) pow er x duty cycle) (m W) (MHz) (dBm ) (dB) (dBm ) (W) 1852.4 23.0 24.00 0.251 251 W-CDMA FDD Band 2 1880.0 23.0 1.00 24.00 100% 0.251 251 (RMS-Value) 24.00 1907.6 23.0 0.251 251 Maxim um calculated MPE value: MPE-Lim it: 1 [m W/cm ^2] Highest MPE 0.050 [m W/cm ^2] value: Margin to 0.950 [m W/cm ^2] lim it Remark: based on 0dBi antenna gain and additional path loss of 0dB TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 13 of 22 4.2.2.2. Max. antenna gain calculations accord. FCC-regulations Based on valid limits on ERP/EIRP and max. MPE the maximum antenna gain which can be used for the specific application is calculated. Maxim um antenna gain considerations for fixed/m obile operations for com plying w ith lim its: Maximum pow er delivery at RF-Pad from Module incl. Duty cycle (mW): POUT 251 (Avg. Burst Pow er or RMS) Atten-Pad Attenuation - Path Loss 0.0 PANT Resulting delivered Pow er at antenna input [m W] 251 R Safety distance [cm ] 20 MPE limit acc. §1.1310 and RSS-102 for uncontrolled exposure (m W/cm ²): S 1.00 (FCC use mW/cm² & IC use W/m²) G1 Maximum Antenna gain to comply w ith MPE limit (dBi): 13.01 (For G1 the low est measured channel to reach minimum ant. Gain selected) ERP pow er limit according to §2.1091 [W]: 3.00 (Avg. Burst Pow er or RMS) G2 Max. Antenna gain to comply w ith this limit incl. Duty cycle (dBi): 12.92 (For G2 select the max. Avg. Burst Pow er or RMS value incl. Duty cycle) EIRP pow er limit according to §24.232 [W]: 2.00 G3 Max. Antenna gain to comply w ith this limit (dBi): 9.01 (For G3 select the max. Average burst pow er value excluding Duty cycle) G 1900MHz-Band Min (G1, G2, G3) (dBi) 9.01 Sum m arized The max. ant. gain for mobile operation at 1900 MHz band to comply with MPE and EIRP 9.01 results: limits incl. External path loss for shown application shall not exceed (dBi): TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 14 of 22 4.3. Conclusion for maximum admissible antenna gain (FCC only) Max. Gain in Lower operational band (850MHz) 7.76 dBd (9.91 dBi) [dBd] Max. Gain in Higher operational band (1900MHz) 9.01 dBi [dBi] Remark: calculations does not include other may be nearby situated second transmitter (Co-location) TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 15 of 22 4.4. Canada RSS-102, Issue 5 regulations 4.4.1. Exemption Limits: Exemption Limits for Routine Evaluation — RF Exposure Evaluation RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows:  below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1 W (adjusted for tune-up tolerance);  at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 4.49/ƒ0.5 W (adjusted for tune-up tolerance), where ƒ is in MHz;  at or above 48 MHz and below 300 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 0.6 W (adjusted for tune-up tolerance);  at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10 -2 ƒ0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz;  at or above 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 5 W (adjusted for tune-up tolerance). In these cases, the information contained in the RF exposure technical brief may be limited to information that demonstrates how the e.i.r.p. was derived. 4.4.1.1. Exemption Limits 850MHz Band: Operating Frequency Declared Max. Maxim um Duty Declared Equivalent Lim it for Check for Mode on channel m axim um positive output pow er cycle Maxim um conducted devices Exem ption conducted tolerance (declared+ conducted output pow er operating output according Tune-up) output (m axim um betw een pow er m anfacturer pow er conducted 300MHz and output pow er 6GHz (MHz) (dBm ) (W) includ. duty (dBm ) (dB) cycle) (m W) (m W) WCDMA 826,4 23,0 24,0 0,2512 251,19 1290,86 Yes FDD Band 5 836,4 23,0 1,0 24,0 100% 0,2512 251,19 1301,51 Yes (RMS-Value) 846,6 23,0 24,0 0,2512 251,19 1312,34 Yes 4.4.1.2. Exemption Limits 1900MHz Band: Operation Frequency Declared Max. positive Declared Duty cycle Declared Equivalent Lim it for Check for Mode on channel m axim um tolerance m axim um Maxim um conducted output devices Exem ption conducted according output pow er conducted pow er (m axim um operating output m anfacturer (Measured+ output pow er conducted output betw een pow er Tune-up) pow er x duty 300MHz and cycle) 6GHz (MHz) (dBm ) (dB) (dBm ) (W) (m W) (m W) W-CDMA 1852,4 23,0 24,0 0,251 251 2241,00 Yes FDD Band 2 1880,0 23,0 1,0 24,0 100% 0,251 251 2263,76 Yes (RMS-Value) 1907,6 23,0 24,0 0,251 251 2286,42 Yes 4.4.2. Conclusion: for applications where minimum distance to radiating element is 20cm Annex C of RSS-102 should be filled out. TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 16 of 22 4.5. Measurement uncertainties The reported uncertainties are calculated based on the standard uncertainty multiplied with the appropriate coverage factor k, such that a confidence level of approximately 95% is achieved. For uncertainty determination, each component used in the concrete measurement set-up was taken in account and it’s contribution to the overall uncertainty according it’s statistical distribution calculated. Following table shows expectable uncertainties for each measurement type performed. Calculated uncertainty based RF-Measurement Frequency range Remarks: on a confidence level of 95% Power Output conducted 9 kHz .. 20 GHz 1.0 dB -- Power Output radiated 30 MHz .. 4 GHz 3.17 dB Substitution method Conducted emissions on antenna ports 9 kHz .. 20 GHz 1.0 dB -- 150 kHz .. 30 MHz 5.0 dB Magnetic field Radiated emissions enclosure 30 MHz .. 1 GHz 4.2 dB E-Field 1 GHz .. 20 GHz 3.17 dB Substitution method 9 kHz .. 4 GHz 0.1272 ppm (Delta Marker ) Frequency error Occupied bandwidth 1.0 dB Power 9 kHz .. 4 GHz 0.1272 ppm (Delta Marker) Frequency error Emission bandwidth 1.0 dB Power Frequency stability 9 kHz .. 20 GHz 0.0636 ppm -- Conducted emissions 9 kHz .. 150 kHz 4.0 dB -- on AC-mains port (UCISPR) 150 kHz .. 30 MHz 3.6 dB Table: measurement uncertainties, valid for conducted/radiated measurements 5. Abbreviations used in this report The abbreviations ANSI American National Standards Institute AV , AVG, CAV Average detector EIRP Equivalent isotropically radiated power, determined within a separate measurement EGPRS Enhanced General Packet Radio Service EUT Equipment Under Test FCC Federal Communications Commission, USA IC Industry Canada n.a. not applicable Op-Mode Operating mode of the equipment PK Peak RBW resolution bandwidth RF Radio frequency RSS Radio Standards Specification, Documents from Industry Canada Rx Receiver TCH Traffic channel Tx Transmitter QP Quasi peak detector VBW Video bandwidth ERP Effective radiated power TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 17 of 22 6. Accreditation details of CETECOM’s laboratories and test sites Ref.- Accreditation Valid for laboratory area or test site No. Certificate Accreditation Body - D-PL- DAkkS, Deutsche All laboratories and test sites of CETECOM GmbH, Essen 12047-01-01 Akkreditierungsstelle GmbH 337 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) FCC, Federal Communications 487 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) (MRA US-EU Commission 558 Radiated Measurements above 1 GHz, 3 m (FAR) 0003) Laboratory Division, USA 348 Mains Ports Conducted Interference Measurements 348 Telecommunication Ports Conducted Interference Measurem. 337 3462D-1 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) 487 3462D-2 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) IC, Industry Canada Certification 550 3462D-2 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) and Engineering Bureau 558 3462D-3 Radiated Measurements above 1 GHz, 3 m (FAR) 487 R-2666 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) VCCI, Voluntary Control Council 550 G-301 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) for Interference by Information 348 C-2914 Mains Ports Conducted Interference Measurements Technology Equipment, Japan 348 T-1967 Telecommunication Ports Conducted Interference Measurem. OATS = Open Area Test Site, SAR = Semi Anechoic Room, FAR = Fully Anechoic Room TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 18 of 22 7. Instruments and Ancillary 7.1. Used equipment “CTC” The “Ref.-No” in the left column of the following tables allows the clear identification of the laboratory equipment. 7.1.1. Test software and firmware of equipment Ref.-No. Equipment Type Serial-No. Version of Firmware or Software during the test 001 EMI Test Receiver ESS 825132/017 Firm.= 1.21 , OTP=2.0, GRA=2.0 012 Signal Generator (EMS-cond.) SMY 01 839069/027 Firm.= V 2.02 013 Power Meter (EMS cond.) NRVD 839111/003 Firm.= V 1.51 017 Digital Radiocommunication Tester CMD 60 M 844365/014 Firmware = V 3.52 .22.01.99, DECT = D2.87 13.01.99 053 Audio Analyzer UPA3 860612/022 Firm. V 4.3 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 Firm.= V 3.1DHG 140 Signal Generator SMHU 831314/006 Firm.= 3.21 261 Thermal Power Sensor NRV-Z55 825083/0008 EPROM-Datum 02.12.04, SE EE 1 B 262 Power Meter NRV-S 825770/0010 Firm.= 2.6 263 Signal Generator SMP 04 826190/0007 Firm.=3.21 264 Spectrum Analyzer FSEK 30 826939/005 Bios=2.1, Analyzer= 3.20 UNIT Firmware= 4.04, SW-Main=4.04, SW-BBP=1.04, 295 Racal Digital Radio Test Set 6103 1572 SW-DSP=1.02, Hardboot=1.02, Softboot=2.02 R&S Test Firmware =3.53 /3.54 (current Testsoftw. f. 298 Univ. Radio Communication Tester CMU 200 832221/091 all band used 323 Digital Radiocommunication Tester CMD 55 825878/0034 Firm.= 3.52 .22.01.99 331 Climatic Test Chamber -40/+80 Grad HC 4055 43146 TSI 1.53 335 CTC-EMS-Conducted System EMS Conducted - EMC 32 V 8.52 340 Digital Radiocommunication Tester CMD 55 849709/037 Firm.= 3.52 .22.01.99 355 Power Meter URV 5 891310/027 Firm.= 1.31 365 10V Insertion Unit 50 Ohm URV5-Z2 100880 Eprom Data = 31.03.08 366 Ultra Compact Simulator UCS 500 M4 V0531100594 Firm. UCS 500=001925/3.06a02, rc=ISMIEC 4.10 371 Bluetooth Tester CBT32 100153 CBT V5,30+ SW-Option K55, K57 377 EMI Test Receiver ESCS 30 100160 Firm.= 2.30, OTP= 02.01, GRA= 02.36 378 Broadband RF Field Monitor RadiSense III 03D00013SNO-08 Firm.= V.03D13 383 Signal Generator SME 03 842 828 /034 Firm.= 4.61 389 Digital Multimeter Keithley 2000 0583926 Firm. = A13 (Mainboard) A02 (Display) Firm.= 4.50 #005, IPL=4.01#001,OS=4.02#001, 392 Radio Communication Tester MT8820A 6K00000788 GSM=4.41#013, W-CDMA= 4.54#004, scenario= 4.52#002 R&S Test Firmware Base=5.14, Mess-Software= 436 Univ. Radio Communication Tester CMU 200 103083 GSM:5.14 WCDMA:5.14 (current Testsoftw. F. all band 441 CTC-SAR-EMI Cable Loss System EMI field (SAR) - EMC 32 Version 8.52 442 CTC-SAR-EMS System EMS field (SAR) - EMC 32 Version 8.40 System CTC-FAR-EMI- 443 CTC-FAR-EMI-RSE - Spuri 7.2.5 or EMC 32 Ver. 8.53 RSE 444 CTC-FAR-EMS field System-EMS-Field (FAR) - EMC 32 Version 8.40 R&S Test Firmware Base=5.14, GSM=5.14 460 Univ. Radio Communication Tester CMU 200 108901 WCDMA=5.14 (current Testsoftw.,f. all band to be used, 489 EMI Test Receiver ESU40 1000-30 Firmware=4.43 SP3, Bios=V5.1-16-3, Spec. =01.00 491 ESD Simulator dito ESD dito dito307022 V 2.30 524 Voltage Drop Simulator VDS 200 0196-16 Software Nr: 000037 Version V4.20a01 526 Burst Generator EFT 200 A 0496-06 Software Nr. 000034 Version V2.32 527 Micro Pulse Generator MPG 200 B 0496-05 Software-Nr. 000030 Version V2.43 528 Load Dump Simulator LD 200B 0496-06 Software-Nr. 000031 Version V2.35a01 R&S Test Firmware Base=5.14, GSM=5.14 546 Univ. Radio Communication Tester CMU 200 106436 WCDMA=5.14 (current Testsoftw.,f. all band to be used R&S Test Firmware Base=V5.1403 (current Testsoftw., 547 Univ. Radio Communication Tester CMU 200 835390/014 f. all band used, GSM = 5.14 WCDMA: = 5.14 584 Spectrum Analyzer FSU 8 100248 2.82_SP3 R&S Test Firmware Base=5.01, GSM=5.02 WCDMA= 597 Univ. Radio Communication Tester CMU 200 100347 not installed, Mainboard= µP1=V.850 598 Spectrum Analyzer FSEM 30 (Reserve) 831259/013 Firmware Bios 3.40 , Analyzer 3.40 Sp 2 620 EMI Test Receiver ESU 26 100362 4.43_SP3 642 Wideband Radio Communication Tester CMW 500 126089 Setup V03.26, Test programm component V03.02.20 CBT V 5.40, FW: V.2.41 (FPGA Digital, V. 3.09 FPGA 692 Bluetooth Tester CBT 32 100236 RF) TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 19 of 22 7.1.2. Single instruments and test systems Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 001 EMI Test Receiver ESS 825132/017 Rohde & Schwarz 12 M - 31.05.2015 005 AC - LISN (50 Ohm/50µH, test site 1) ESH2-Z5 861741/005 Rohde & Schwarz 12 M - 31.05.2015 007 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 892563/002 Rohde & Schwarz 12 M - 31.05.2015 009 Power Meter (EMS-radiated) NRV 863056/017 Rohde & Schwarz 24 M - 31.05.2015 016 Line Impedance Simulating Network Op. 24-D B6366 Spitzenberger+Spies 36 M - 31.03.2016 020 Horn Antenna 18 GHz (Subst 1) 3115 9107-3699 EMCO 36/12 M - 31.03.2017 021 Loop Antenna (H-Field) 6502 9206-2770 EMCO 36 M - 31.05.2015 030 Loop Antenna (H-field) HFH-Z2 879604/026 Rohde & Schwarz 36 M - 31.05.2015 033 RF-current probe (100kHz-30MHz) ESH2-Z1 879581/18 Rohde & Schwarz 24 M - 31.05.2015 057 relay-switch-unit (EMS system) RSU 494440/002 Rohde & Schwarz pre-m 1a 060 power amplifier (DC-2kHz) PAS 5000 B6363 Spitzenberger+Spies - 3 WRCT 1900/2200-5/40- 066 notch filter (WCDMA; FDD1) 5 Wainwright GmbH 12 M 1g 31.07.2015 10EEK 086 DC - power supply, 0 -10 A LNG 50-10 - Heinzinger Electronic pre-m 2 087 DC - power supply, 0 -5 A EA-3013 S - Elektro Automatik pre-m 2 Helmholtz coil: 2x10 coils 090 Helmholtz coil: 2x10 coils in series - RWTÜV 12 M 4 31.05.2015 in 091 USB-LWL-Converter OLS-1 007/2006 Ing. Büro Scheiba - 4 099 passive voltage probe ESH2-Z3 299.7810.52 Rohde & Schwarz 36 M - 31.05.2015 100 passive voltage probe Probe TK 9416 without Schwarzbeck 36 M - 31.05.2015 110 USB-LWL-Converter OLS-1 - Ing. Büro Scheiba - 4 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 BOCONSULT 36 M - 31.03.2016 136 adjustable dipole antenna (Dipole 1) 3121C-DB4 9105-0697 EMCO 36 M - 31.05.2015 140 Signal Generator SMHU 831314/006 Rohde & Schwarz 24 M - 31.03.2016 248 attenuator SMA 6dB 2W - Radiall pre-m 2 249 attenuator SMA 10dB 10W - Radiall pre-m 2 252 attenuator N 6dB 12W - Radiall pre-m 2 256 attenuator SMA 3dB 2W - Radiall pre-m 2 257 hybrid 4031C 04491 Narda pre-m 2 260 hybrid coupler 4032C 11342 Narda pre-m 2 261 Thermal Power Sensor NRV-Z55 825083/0008 Rohde & Schwarz 24 M - 31.03.2016 262 Power Meter NRV-S 825770/0010 Rohde & Schwarz 24 M - 31.03.2016 263 Signal Generator SMP 04 826190/0007 Rohde & Schwarz 36 M - 31.03.2016 264 Spectrum Analyzer FSEK 30 826939/005 Rohde & Schwarz 12 M - 31.05.2015 265 peak power sensor NRV-Z33, Model 04 840414/009 Rohde & Schwarz 24 M - 31.03.2016 266 Peak Power Sensor NRV-Z31, Model 04 843383/016 Rohde & Schwarz 24 M - 31.03.2016 267 notch filter GSM 850 WRCA 800/960-6EEK 9 Wainwright GmbH pre-m 2 270 termination 1418 N BB6935 Weinschel pre-m 2 271 termination 1418 N BE6384 Weinschel pre-m 2 272 attenuator (20 dB) 50 W Model 47 BF6239 Weinschel pre-m 2 273 attenuator (10 dB) 100 W Model 48 BF9229 Weinschel pre-m 2 274 attenuator (10 dB) 50 W Model 47 (10 dB) 50 W BG0321 Weinschel pre-m 2 275 DC-Block Model 7003 (N) C5129 Weinschel pre-m 2 276 DC-Block Model 7006 (SMA) C7061 Weinschel pre-m 2 279 power divider 1515 (SMA) LH855 Weinschel pre-m 2 287 pre-amplifier 25MHz - 4GHz AMF-2D-100M4G-35-10P 379418 Miteq 12 M 1c 31.07.2015 291 high pass filter GSM 850/900 WHJ 2200-4EE 14 Wainwright GmbH 12 M 1c 31.07.2015 298 Univ. Radio Communication Tester CMU 200 832221/091 Rohde & Schwarz pre-m 3 300 AC LISN (50 Ohm/50µH, 1-phase) ESH3-Z5 892 239/020 Rohde & Schwarz 12 M - 31.05.2015 301 attenuator (20 dB) 50W, 18GHz 47-20-33 AW0272 Lucas Weinschel pre-m 2 302 horn antenna 40 GHz (Meas 1) BBHA9170 155 Schwarzbeck 36 M - 31.03.2017 303 horn antenna 40 GHz (Subst 1) BBHA9170 156 Schwarzbeck 36 M - 31.03.2017 341 Digital Multimeter Fluke 112 81650455 Fluke 24 M - 31.03.2016 342 Digital Multimeter Voltcraft M-4660A IB 255466 Voltcraft 24 M - 31.05.2015 347 laboratory site radio lab. - - - 5 348 laboratory site EMI conducted - - - 5 354 DC - Power Supply 40A NGPE 40/40 448 Rohde & Schwarz pre-m 2 355 Power Meter URV 5 891310/027 Rohde & Schwarz 24 M - 31.03.2016 356 power sensor NRV-Z1 882322/014 Rohde & Schwarz 24 M - 31.05.2015 357 power sensor NRV-Z1 861761/002 Rohde & Schwarz 24 M - 31.05.2015 371 Bluetooth Tester CBT32 100153 R&S 24 M - 31.03.2016 373 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 100535 Rohde & Schwarz 24 M - 31.03.2016 376 Horn Antenna 6 GHz BBHA9120 E BBHA 9120 E 179 Schwarzbeck 12 M - 31.05.2015 377 EMI Test Receiver ESCS 30 100160 Rohde & Schwarz 12 M - 31.05.2015 389 Digital Multimeter Keithley 2000 0583926 Keithley 24 M - 31.05.2015 392 Radio Communication Tester MT8820A 6K00000788 Anritsu 12 M - 31.05.2015 431 Model 7405 Near-Field Probe Set 9305-2457 EMCO - 4 436 Univ. Radio Communication Tester CMU 200 103083 Rohde & Schwarz 12 M - 31.05.2015 439 UltraLog-Antenna HL 562 100248 Rohde & Schwarz 36 M - 31.03.2017 System CTC-FAR-EMI- ETS-Lindgren / 443 CTC-FAR-EMI-RSE - 12 M 5 31.07.2015 RSE CETECOM 448 notch filter WCDMA_FDD II WRCT 1850.0/2170.0- 5 Wainwright Instruments 12 M 1c 31.07.2015 TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 20 of 22 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 5/40- GmbH WRCT 824.0/894.0-5/40- 449 notch filter WCDMA FDD V 1 Wainwright 12 M 1c 31.07.2015 8SSK 454 Oscilloscope HM 205-3 9210 P 29661 Hameg - 4 456 DC-Power supply 0-5 A EA 3013 S 207810 Elektro Automatik pre-m 2 459 DC -Power supply 0-5 A , 0-32 V EA-PS 2032-50 910722 Elektro Automatik pre-m 2 460 Univ. Radio Communication Tester CMU 200 108901 Rohde & Schwarz 12 M - 31.05.2015 463 Universal source HP3245A 2831A03472 Agilent - 4 466 Digital Multimeter Fluke 112 89210157 Fluke USA 24 M - 31.03.2016 467 Digital Multimeter Fluke 112 89680306 Fluke USA 36 M - 31.05.2015 468 Digital Multimeter Fluke 112 90090455 Fluke USA 36 M - 31.05.2015 477 ReRadiating GPS-System AS-47 - Automotive Cons. Fink - 3 480 power meter (Fula) NRVS 838392/031 Rohde & Schwarz 24 M - 31.05.2015 482 filter matrix Filter matrix SAR 1 - CETECOM (Brl) - 1d AMF-5D-02501800-25- 484 pre-amplifier 2,5 - 18 GHz 1244554 Miteq 12 M - 31.07.2015 10P System EMI field (SAR) ETS Lindgren / 487 System CTC NSA-Verification SAR-EMI - 24 M - 30.06.2015 NSA CETECOM 489 EMI Test Receiver ESU40 1000-30 Rohde & Schwarz 12 M - 31.05.2015 WRCG 1709/1786- 502 band reject filter SN 9 Wainwright pre-m 2 1699/1796- 503 band reject filter WRCG 824/849-814/859- SN 5 Wainwright pre-m 2 WRCA 800/960-02/40- 512 notch filter GSM 850 SN 24 Wainwrght 12 M 1c 31.07.2015 6EEK 517 relais switch matrix HF Relais Box Keithley SE 04 Keithley pre-m 2 523 Digital Multimeter L4411A MY46000154 Agilent 24 M - 31.05.2015 529 6 dB Broadband resistive power divider Model 1515 LH 855 Weinschel pre-m 2 530 10 dB Broadband resistive power divider R 416110000 LOT 9828 - pre-m 2 546 Univ. Radio Communication Tester CMU 200 106436 R&S 12 M - 12.02.2015 547 Univ. Radio Communication Tester CMU 200 835390/014 Rohde & Schwarz 12 M - 31.05.2015 548 Digital-Barometer GBP 2300 without Greisinger GmbH 36 M - 30.06.2015 549 Log.Per-Antenna HL025 1000060 Rohde & Schwarz 36/12 M - 31.05.2015 552 high pass filter 2,8-18GHz WHKX 2.8/18G-10SS 4 Wainwright 12 M 1c 31.07.2015 System CTC FAR S- 558 System CTC FAR S-VSWR - CTC 24 M - 31.07.2015 VSWR 574 Biconilog Hybrid Antenna BTA-L 980026L Frankonia 36/12 M - 31.03.2016 584 Spectrum Analyzer FSU 8 100248 Rohde & Schwarz pre-m - 597 Univ. Radio Communication Tester CMU 200 100347 Rohde & Schwarz 36 M - 31.03.2016 598 Spectrum Analyzer FSEM 30 (Reserve) 831259/013 Rohde & Schwarz 24 M - 13.01.2015 600 power meter NRVD (Reserve) 834501/018 Rohde & Schwarz 24 M - 31.05.2015 601 medium-sensitivity diode sensor NRV-Z5 (Reserve) 8435323/003 Rohde & Schwarz 24 M - 31.05.2015 602 peak power sensor NRV-Z32 (Reserve) 835080 Rohde & Schwarz 24 M - 31.05.2015 611 DC power supply E3632A KR 75305854 Agilent pre-m 2 612 DC power supply E3632A MY 40001321 Agilent pre-m 2 613 Attenuator R416120000 20dB 10W Lot. 9828 Radiall pre-m 2 616 Digitalmultimeter Fluke 177 88900339 Fluke 24 M - 31.03.2016 617 Power Splitter/Combiner ZFSC-2-2-S+ S F987001108 Mini Circuits - 2 618 Power Splitter/Combiner 50PD-634 600994 JFW Industries USA - 2 619 Power Splitter/Combiner 50PD-634 600995 JFW Industries, USA - 3 620 EMI Test Receiver ESU 26 100362 Rohde-Schwarz 12 M - 31.05.2015 621 Step Attenuator 0-139 dB RSP 100017 Rohde & Schwarz pre-m 2 625 Generic Test Load USB Generic Test Load USB - CETECOM - 2 201.0999.9302.6.4.1.4 627 data logger OPUS 1 G. Lufft GmbH 36 M - 30.05.2015 3 634 Spectrum Analyzer FSM (HF-Unit) 826188/010 Rohde & Schwarz pre-m 2 636 Thermal Imaging camera Ti32 Ti32-12060213 Fluke Corporation 36 M - 31.07.2015 HDMI cable with Ethernet 637 High Speed HDMI with Ethernet 1m - KogiLink - 2 1m 638 HDMI Kabel with Ethernet 1,5 m flach HDMI cable with Ethernet - Reichelt - 2 640 HDMI cable 2m rund HDMI cable 2m rund - Reichelt - 2 641 HDMI cable with Ethernet Certified HDMI cable with - PureLink - 2 642 Wideband Radio Communication Tester CMW 500 126089 Rohde&Schwarz 12 M - 31.05.2015 644 Amplifierer ZX60-2534M+ SN865701299 Mini-Circuits - - 670 Univ. Radio Communication Tester CMU 200 106833 Rohde & Schwarz 12 M - 31.05.2015 671 DC-power supply 0-5 A EA-3013S - Elektro Automatik pre-m 2 678 Power Meter NRP 101638 Rohde&Schwarz pre-m - Narda Safety Test 686 Field Analyzer EHP-200A 160WX30702 24 M - 18.07.2015 Solutions 688 Pre Amp JS-18004000-40-8P 1750117 Miteq pre-m - 692 Bluetooth Tester CBT 32 100236 Rohde & Schwarz 12 M - 31.05.2015 693 TS8997 CTC-Radio Lab 1_TS8997 - Rohde&Schwarz 12 M 5 31.05.2015 TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 21 of 22 7.1.3. Legend Note / remarks Calibrated during system calibration: 1a System CTC-SAR-EMS (Ref.-No. 442) 1b System-CTC-EMS-Conducted (Ref.-No. 335) 1c System CTC-FAR-EMI-RSE (Ref.-No . 443) 1d System CTC-SAR-EMI (Ref.-No . 441) 1e System CTC-OATS (EMI radiated) (Ref.-No. 337) 1f System CTC-CTIA-OTA (Ref.-No . 420) 1g System CTC-FAR-EMS (Ref.-No . 444) 2 Calibration or equipment check immediately before measurement 3 Regulatory maintained equipment for functional check or support purpose 4 calibration of this equipment Ancillary equipment without has no effect calibration onmechanical e.g. measuring result equipment or monitoring equipment 5 Test System Interval of calibration 12 M 12 month 24 M 24 month 36 M 36 month 24/12 M Calibration every 24 months, between this every 12 months internal validation 36/12 M Calibration every 36 months, between this every 12 months internal validation Pre-m Check before starting the measurement - Without calibration TR6-0608-14-1-4b

Test Report 6-0608-14-1-4b, Page 22 of 22 7.1.4. Legend Note / remarks Calibrated during system calibration: 1a System CTC-SAR-EMS (Ref.-No. 442) 1b System-CTC-EMS-Conducted (Ref.-No. 335) 1c System CTC-FAR-EMI-RSE (Ref.-No . 443) 1d System CTC-SAR-EMI (Ref.-No . 441) 1e System CTC-OATS (EMI radiated) (Ref.-No. 337) 1f System CTC-CTIA-OTA (Ref.-No . 420) 1g System CTC-FAR-EMS (Ref.-No . 444) 2 Calibration or equipment check immediately before measurement 3 Regulatory maintained equipment for functional check or support purpose 4 calibration of this equipment Ancillary equipment without has no effect calibration onmechanical e.g. measuring result equipment or monitoring equipment 5 Test System Interval of calibration 12 M 12 month 24 M 24 month 36 M 36 month 24/12 M Calibration every 24 months, between this every 12 months internal validation 36/12 M Calibration every 36 months, between this every 12 months internal validation Pre-m Check before starting the measurement - Without calibration 8. Versions of test reports (change history) Version Applied changes Date of release -- Initial release 2015-04-20 TR6-0608-14-1-4b


Document Created: 2015-05-06 16:13:55
Document Modified: 2015-05-06 16:13:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC