Modular statement

FCC ID: RI7OM12030-210

Attestation Statements

Download: PDF
FCCID_2560857

TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Date: 18 March 2015 Ref: FCC Modular approval letter for: FCC ID: Model: RI7OM12030-210 OM12030/210 To whom it may concern: The following attestation addresses the requirements to support modular approval pursuant to §15.212 of the Commission’s Rules: Modular approval requirement Yes No* (i) The radio elements of the modular transmitter must have their own shielding. X (ii) The modular transmitter must have buffered modulation/data inputs. X (iii) The modular transmitter must have its own power supply regulation. X (iv) The modular transmitter must comply with the antenna and transmission system requirements X of §§15.203, 15.204(b) and 15.204(c). (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not X be inside another device during testing for compliance with part 15 requirements. (vi) The modular transmitter must be equipped with either a permanently affixed label or must be X capable of electronically displaying its FCC identification number. (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions X along with the module to explain any such requirements. (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final X configuration. * Shall provide a detailed explanation if the answer is “No”. Sincerely, __________________________ By: Brian Tucker Title: VP Quality Management, Auto Company: Telit Communications S.p.A. Telephone: +1-919-415-1505 e-mail: Brian.Tucker@telit.com


Document Created: 2015-03-18 10:19:01
Document Modified: 2015-03-18 10:19:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC