RI7ME910C1P1

Application Details:

Equipment	LTE CatM1/NB_IoT wireless module
FRN	0009643503
Grantee Code	RI7
Product Code	ME910C1P1
Applicant Business	Telit Communications S.p.A.
Business Address	Viale Stazione di Prosecco 5/b , Trieste,N/A Italy 34010
TCB Scope	A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
TCB Email	[email protected]
Applicant	Ken Bednasz – VP Application Engineering - Americas
Applicant Phone	1104
Applicant Fax	1-919-840-0337
Applicant Email	[email protected]
Applicant MailStop
Test Firm	DEKRA TESTING AND CERTIFICATION Hsin Chu Lab.
Test Firm Contact	Roy Wang
Test Firm Phone	3501
Test Firm Fax	886-3-592-8958
Test Firm Email	[email protected]
Certified By	Ken Bednasz – VP Application Engineering - Americas

Comment [w0xo4nGuuOVPS7+RGF029w==]: Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 6.6 dBi for the 700 MHz bands, 7.0 dBi for the 850 MHz bands, 6.0 dBi for the 1700 MHz band and 9.0 dBi for 1900 MHz frequency bands. Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.

---