Cover Letter (Modular Approval Request)_rev.pdf

FCC ID: RI7LN960A16

Cover Letter(s)

Download: PDF

FCCID_4331991

FCC ID: RI7LN960A16

Modular Approval Request Letter

Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

June 24, 2019

Dear Application Examiner,

TELIT COMMUNICATION S.P.A, LTE M.2 Module, FCC ID: RI7LN960A16 would like
to have your authorization as a modular approval specific to the mobile RF exposure
condition.

The requirements of KDB996369 have been met and shown on the following
statements.
1. “The modular transmitter must have its own RF shielding.” The radio portion of
this module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT
has buffered data inputs, it is integrated in chip SDR845.

3. “The modular transmitter must have its own power supply regulation.” The part
number of this regulator is PMX20.

4. “The modular transmitter must comply with the antenna requirements of section
15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The
spurious emission, unique antenna connector and photo of antennas are shown
in the test report.

5. “The modular transmitter must be tested in a stand-alone configuration” The EUT
was tested in a stand-alone configuration via a USB extender. Please see section
Photographs of Test Configuration in the test report, the EUT was plugged in this
extender.

6. “The modular transmitter must be labeled with its own FCC ID number.” Please
see exhibition Label Sample for the FCC ID of this module. And also in the
exhibition Users Manual, there are instructions give to the OEM on how to label
the end product.

Document Created: 2019-06-24 13:09:49
Document Modified: 2019-06-24 13:09:49

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC