Test Report

FCC ID: RI7LE910C1SV

Test Report

Download: PDF
FCCID_4161935

Report No：1890124R-RFUSP01V00 FCC/ISED Test Report Product Name ： LE910C1-SV Trade Name ： Model No. ： LE910C1-SV Type ： SDoC IC ID ： 5131A-LE910C1SV Applicant ： Telit Wireless Solutions Co., LTD Address ： 13th FL. Shinyoung Securities Bld., 6, Gukjegeumyung-ro8-gil, Yeongdeungpo-gu, Seoul, 150-884, Korea Date of Receipt ： Sep. 10, 2018 Issued Date ： Oct. 18, 2018 Report No. ： 1890124R-RFUSP01V00 Report Version ： V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd.. Page: 1 of 28

Report No：1890124R-RFUSP01V00 Te s t R e p o r t C e r t i f i c a t i o n Issued Date : Oct. 18, 2018 Report No. : 1890124R-RFUSP01V00 Product Name : LE910C1-SV Applicant : Telit Wireless Solutions Co., LTD Address : 13th FL. Shinyoung Securities Bld., 6, Gukjegeumyung-ro8-gil, Yeongdeungpo-gu, Seoul, 150-884, Korea Manufacturer : Telit Wireless Solutions Co., LTD Trade Name : Model No. : LE910C1-SV Type : SDoC IC ID : 5131A-LE910C1SV EUT Voltage : DC 3.4V~4.2V Testing Voltage : DC 3.8V Applicable Standard : FCC CFR Title 47 Part 15 Subpart B: 2017 Class B ICES-003 Issue 6: 2016 Class B ANSI C63.4: 2014 Test Lab : Hsin Chu Laboratory Address : No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 310, Taiwan, R.O.C. TEL: +886-3-582-8001 / FAX: +886-3-582-8958 Test Result : Complied Documented By : ( Demi Chang / Senior Engineering Adm. Specialist ) Tested By : ( Andy Tsai / Senior Engineer ) Approved By : ( Roy Wang / Director ) Page: 2 of 28

Report No：1890124R-RFUSP01V00 Revision History Report No. Version Description Issued Date 1890124R-RFUSP01V00 V1.0 Initial issue of report Oct. 18, 2018 Page: 3 of 28

Report No：1890124R-RFUSP01V00 TA B L E O F C O N T E N T S Description Page 1. General Information ............................................................................................................... 5 1.1. EUT Description ............................................................................................................. 5 1.2. Test Mode ....................................................................................................................... 6 1.3. Tested System Details .................................................................................................... 7 1.4. Configuration of tested System ...................................................................................... 7 1.5. EUT Exercise Software .................................................................................................. 7 1.6. Test Facility ..................................................................................................................... 8 1.7. List of Test Equipment .................................................................................................... 9 1.8. Measurement Uncertainty .............................................................................................. 9 2. Conducted Emission ............................................................................................................ 10 2.1. Test Setup .................................................................................................................... 10 2.2. Limits ............................................................................................................................ 10 2.3. Test Procedure ............................................................................................................. 10 2.4. Test Specification .......................................................................................................... 11 2.5. Test Result .................................................................................................................... 11 3. Radiated Emission ............................................................................................................... 12 3.1. Test Setup .................................................................................................................... 12 3.2. Limits ............................................................................................................................ 13 3.3. Test Procedure ............................................................................................................. 14 3.4. Test Specification .......................................................................................................... 15 3.5. Test Result .................................................................................................................... 16 Attachment 1 ........................................................................................................................................ 24  Test Setup Photograph ................................................................................................. 24 Attachment 2 ........................................................................................................................................ 27  EUT External Photograph............................................................................................. 27 Page: 4 of 28

Report No：1890124R-RFUSP01V00 1. General Information 1.1. EUT Description Product Name LE910C1-SV Trade Name Model No. LE910C1-SV Tx Frequency Range LTE Band 4: 1710~1755 LTE Band 13: 777~787 Rx Frequency Range LTE Band 4: 2110~2115 LTE Band 13: 746~756 Modulation QPSK /16QAM HW Version 1.0 SW Version 25.50.280-A003 IMEI No. 359698099997379 Antenna Information Product Name Hankook Network Solution Model No. WE14-LF-07 Antenna Type Dipole Antenna Antenna Gain Band 4: 3.5 dBi Band 13: 3 dBi Accessories Information Antenna 3 Pcs Note: This LE910C1-SV support LTE Band 4/13. Page: 5 of 28

Report No：1890124R-RFUSP01V00 1.2. Test Mode DEKRA has verified the construction and function in typical operation. The preliminary tests were performed in different data rate, and to find the worst condition, which was shown in this test report. The following table is the final test mode. RX Mode 1: LTE Band 4 Mode 2: LTE Band 13 Test Items Mode 1 Mode 2 Conducted Emission No No Radiated Emission (Below 1GHz) Yes Yes Radiated Emission (Above 1GHz) Yes Yes Page: 6 of 28

Report No：1890124R-RFUSP01V00 1.3. Tested System Details The types for all equipments, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer Model No. Serial No. FCC ID Power Cord 1 Horn Antenna ELECTRO METRICS EM-6961 103326 DoC -- 2 Base Station R&S CMW500 106071 DoC -- 1.4. Configuration of tested System Connection Diagram Signal Cable Type Signal cable Description A RF Cable Shielded, 2m. 1.5. EUT Exercise Software 1 Setup the EUT and simulators as shown on 1.4. 2 Turn on the power of all equipment. Horn link with base station. 3 The EUT link with base station and it will continue receive the signal. 4 Repeat the above procedure. Page: 7 of 28

Report No：1890124R-RFUSP01V00 1.6. Test Facility Ambient conditions in the laboratory: Required Items Test Item Actual Test Site (IEC 68-1) Temperature (°C) 15 - 35 25 FCC PART 15B 15.109 Humidity (%RH) 25 - 75 65 2 Radiated Emission Barometric pressure (mbar) 860 - 1060 950-1000 Note: Test Site information refers to Laboratory Information. Laboratory Information USA : FCC Registration Number: TW3024 Canada : IC Registration Number: 22397-1 / 22397-2 / 22397-3 The related certificate for our laboratories about the test site and management system can be downloaded from DEKRA Testing and Certification Co., Ltd. Web Site: http://www.dekra.com.tw/english/about/certificates.aspx?bval=5 The address and introduction of DEKRA Testing and Certification Co., Ltd. laboratories can be founded in our Web site: http://www.dekra.com.tw/index_en.aspx If you have any comments, Please don’t hesitate to contact us. Our test sites as below: 1 No. 75-2, 3rd Lin, WangYe Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan (R.O.C.) TEL: +886-3-592-8858 / FAX: +886-3-592-8859 E-Mail : info.tw@dekra.com 2 No.372, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan, R.O.C. TEL: +886-3-582-8001 / FAX: +886-3-582-8958 E-Mail : info.tw@dekra.com 3 No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan, R.O.C. TEL: +886-3-582-8001 / FAX: +886-3-582-8958 E-Mail : info.tw@dekra.com Page: 8 of 28

Report No：1890124R-RFUSP01V00 1.7. List of Test Equipment Radiated Spurious Emissions / CB4-H Instrument Manufacturer Model No. Serial No. Cal. Date Next Cal. Date Signal Analyzer R&S FSVA40 101455 2017/11/21 2018/11/20 Spectrum Analyzer R&S FSV40 101049 2018/01/10 2019/01/09 EXA Signal Analyzer Keysight N9010A MY51440132 2018/03/05 2019/03/04 Bilog Antenna Teseq CBL6112D 23191 2018/06/26 2019/06/25 Horn Antenna Schwarzbeck BBHA 9120D 639 2018/06/01 2019/05/31 Horn Antenna Schwarzbeck BBHA 9170 202 2018/01/31 2019/01/30 Pre-Amplifier DEKRA. AP-025C 201801235 2018/03/12 2019/03/11 Pre-Amplifier EMCI EMCI 1830I 980366 2018/01/08 2019/01/07 Pre-Amplifier Dekra AP-400C 201801231 2017/12/13 2018/12/12 1.8. Measurement Uncertainty Test Item Uncertainty 30MHz～1GHz as ± 3.43 dB Radiated Emission 1GHz～26.5GHz as ± 3.65 dB Page: 9 of 28

Report No：1890124R-RFUSP01V00 2. Conducted Emission 2.1. Test Setup 2.2. Limits FCC Part 15 Subpart B Paragraph 15.107 Limits (dBuV) Frequency Class A Class B MHz QP AV QP AV 0.15 - 0.50 79 66 66 - 56 56 - 46 0.50 - 5.0 73 60 56 46 5.0 - 30 73 60 60 50 Remarks: In the above table, the tighter limit applies at the band edges. 2.3. Test Procedure The EUT and simulators are connected to the main power through a line impedance stabilization network (L.I.S.N.). This provides a 50 ohm /50uH coupling impedance for the measuring equipment. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please refers to the block diagram of the test setup and photographs.) Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.4: 2014 on conducted measurement. Conducted emissions were invested over the frequency range from 0.15MHz to 30MHz using a receiver bandwidth of 9KHz. Page: 10 of 28

Report No：1890124R-RFUSP01V00 2.4. Test Specification According to FCC Part 15 Subpart B: 2017 2.5. Test Result Owing to the DC operation of EUT, this test item is not performed. Page: 11 of 28

Report No：1890124R-RFUSP01V00 3. Radiated Emission 3.1. Test Setup Under 1GHz Test Setup: Above 1GHz Test Setup: Page: 12 of 28

Report No：1890124R-RFUSP01V00 3.2. Limits CISPR 22 Limits (dBuV/m) Class A Class B Frequency Distance Distance MHz dBuV/m dBuV/m (m) (m) 30 – 230 10 40 10 30 230 – 1000 10 47 10 37 Remark: 1. The tighter limit shall apply at the edge between two frequency bands. 2. Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system. 3. RF Voltage (dBuV/m) = 20 log RF Voltage (uV/m) FCC Part 15 Subpart B Paragraph 15.109 Limits Class A Class B Frequency Distance Distance MHz dBuV/m dBuV/m (m) (m) 30 – 88 10 39 3 40 88 – 216 10 43.5 3 43.5 216 – 960 10 46.4 3 46 Above 960 10 49.5 3 54 Remark: 1. RF Voltage (dBuV) = 20 log RF Voltage (uV) 2. In the Above Table, the tighter limit applies at the band edges. 3. Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system. Carrier current systems used as unintentional radiators or other unintentional radiators that are designed to conduct their radio frequency emissions via connecting wires or cables and that operate in the frequency range of 9 KHz to 30 MHz, including devices that deliver the radio frequency energy to transducers, such as ultrasonic devices not covered under part 18 of this chapter, shall comply with the radiated emission limits for intentional radiators provided in §15.209 for the frequency range of 9 KHz to 30 MHz. As an alternative, carrier current systems used as unintentional radiators and operating in the frequency range of 525 KHz to 1705 KHz may comply with the radiated emission limits provided in §15.221(a). Page: 13 of 28

Report No：1890124R-RFUSP01V00 3.3. Test Procedure Under 30MHz Test: The EUT and its simulators are placed on a turn table which is 1.0 meter above ground. The turn table can rotate 360 degrees to determine the position of the maximum electric field strength. The EUT was positioned such that the distance from antenna to the EUT was 3 meters. The antenna which is 1.0 meter above ground. All X-axis, Y-axis and Z-axis polarization of the antenna are set on measurement. The bandwidth below 30MHz setting on the field strength meter is 200Hz and above 30MHz is 9 KHz. The emission limit shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90KHz, 110-490KHz and above 1000MHz. Radiated emission limit in these three bands are based on measurements employing an average detector. Above 30MHz Test: The EUT and its simulators are placed on a turn table which is 0.8 meter above ground. The turn table can rotate 360 degrees to determine the position of the maximum emission level. The antenna can move up and down between 1 meter and 4 meters to find out the maximum emission level. For class A, the EUT was positioned such that the distance from antenna to the EUT was 10 meters for under 1GHz and above 1GHz. For class B, the EUT was positioned such that the distance from antenna to the EUT was 3 or 10 meters for under 1GHz and 3 meters for above 1GHz. The bandwidth below 1GHz setting on the field strength meter is 120 KHz and above 1GHz is 1MHz. Both horizontal and vertical polarization of the antenna are set on measurement. In order to find the maximum emission. Page: 14 of 28

Report No：1890124R-RFUSP01V00 All of the interface cables must be manipulated according to ANSI C63.4 on radiated measurement. For an unintentional radiator, including a digital device, the spectrum shall be investigated from the lowest radio frequency signal generated or used in the device, without going below the lowest frequency for which a radiated emission limit is specified, up to the frequency shown in the folowing table: Highest frequency generated or used in Upper frequency of measurement the device or on which the device range (MHz) operates or tunes (MHz) Below 1.705 30 1.705 – 108 1000 108 – 500 2000 500 – 1000 5000 5th harmonic of the highest frequency Above 1000 or 40 GHz, whichever is lower On any frequency or frequencies below or equal to 1000 MHz, the limits shown are based on measuring equipment employing a CISPR quasi-peak detector function and on any frequency or frequencies above 1000 MHz the radiated limits shown are based upon the use of measurement instrumentation employing an average detector function. When average radiated emission measurement are included emission measurement below 1000 MHz, there also is a limit on the radio frequency emissions, as measured using instrumentation with a peak detector function, corresponding to 20 dB above the maximum permitted average limit. 3.4. Test Specification According to FCC Part 15 Subpart B: 2017 Page: 15 of 28

Report No：1890124R-RFUSP01V00 3.5. Test Result 30MHz-1GHz Spurious: Site : CB4-H Engineer : Andy Tsai Model No : LE910C1-SV Test Date : 2018/10/12 Test Voltage : DC 3.8V Polarity : Horizontal Test Mode : Mode 1: LTE Band 4 No Frequency Emission Level Limit Margin Reading Level Correct Factor Detector (MHz) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB) Type *1 36.887 32.91 40.00 -7.09 48.94 -16.03 QP 2 97.415 29.75 43.50 -13.75 52.34 -22.59 QP 3 148.534 23.74 43.50 -19.76 45.61 -21.87 QP 4 259.89 21.87 46.00 -24.13 42.05 -20.18 QP 5 516.552 28.43 46.00 -17.57 42.01 -13.58 QP 6 606.18 28.16 46.00 -17.84 39.66 -11.50 QP Note: 1. All Reading Levels is Quasi-Peak value. 2. “ * ”, means this data is the worst emission level. 3. Emission Level = Reading Level + Correct Factor 4. The Emission under 30MHz were not included is because their levels are too low. Page: 16 of 28

Report No：1890124R-RFUSP01V00 Site : CB4-H Engineer : Andy Tsai Model No : LE910C1-SV Test Date : 2018/10/12 Test Voltage : DC 3.8V Polarity : Vertical Test Mode : Mode 1: LTE Band 4 No Frequency Emission Level Limit Margin Reading Level Correct Factor Detector (MHz) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB) Type *1 42.513 27.97 40.00 -12.03 45.75 -17.78 QP 2 99.258 19.22 43.50 -24.28 41.27 -22.05 QP 3 143.975 20.11 43.50 -23.39 41.55 -21.44 QP 4 499.965 27.67 46.00 -18.33 42.32 -14.65 QP 5 518.395 28.38 46.00 -17.62 41.81 -13.43 QP 6 603.561 28.29 46.00 -17.71 39.85 -11.56 QP Note: 1. All Reading Levels is Quasi-Peak value. 2. “ * ”, means this data is the worst emission level. 3. Emission Level = Reading Level + Correct Factor 4. The Emission under 30MHz were not included is because their levels are too low. Page: 17 of 28

Report No：1890124R-RFUSP01V00 Site : CB4-H Engineer : Andy Tsai Model No : LE910C1-SV Test Date : 2018/10/12 Test Voltage : DC 3.8V Polarity : Horizontal Test Mode : Mode 2: LTE Band 13 No Frequency Emission Level Limit Margin Reading Level Correct Factor Detector (MHz) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB) Type *1 36.79 33.23 40.00 -6.77 49.24 -16.01 QP 2 98.288 26.03 43.50 -17.47 48.32 -22.29 QP 3 143.975 21.41 43.50 -22.09 42.85 -21.44 QP 4 400.055 23.93 46.00 -22.07 40.20 -16.27 QP 5 519.171 28.06 46.00 -17.94 41.43 -13.37 QP 6 607.635 28.53 46.00 -17.47 40.11 -11.58 QP Note: 1. All Reading Levels is Quasi-Peak value. 2. “ * ”, means this data is the worst emission level. 3. Emission Level = Reading Level + Correct Factor 4. The Emission under 30MHz were not included is because their levels are too low. Page: 18 of 28

Report No：1890124R-RFUSP01V00 Site : CB4-H Engineer : Andy Tsai Model No : LE910C1-SV Test Date : 2018/10/12 Test Voltage : DC 3.8V Polarity : Vertical Test Mode : Mode 2: LTE Band 13 No Frequency Emission Level Limit Margin Reading Level Correct Factor Detector (MHz) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB) Type *1 42.513 28.33 40.00 -11.67 46.11 -17.78 QP 2 99.355 19.82 43.50 -23.68 41.85 -22.03 QP 3 143.975 19.23 43.50 -24.27 40.67 -21.44 QP 4 383.08 24.08 46.00 -21.92 40.70 -16.62 QP 5 499.965 28.99 46.00 -17.01 43.64 -14.65 QP 6 602.494 27.83 46.00 -18.17 39.41 -11.58 QP Note: 1. All Reading Levels is Quasi-Peak value. 2. “ * ”, means this data is the worst emission level. 3. Emission Level = Reading Level + Correct Factor 4. The Emission under 30MHz were not included is because their levels are too low. Page: 19 of 28

Report No：1890124R-RFUSP01V00 Above 1GHz Spurious: Site : CB4-H Engineer : Andy Tsai Model No : LE910C1-SV Test Date : 2018/10/12 Test Voltage : DC 3.8V Polarity : Horizontal Test Mode : Mode 1: LTE Band 4 No Frequency Emission Level Limit Margin Reading Level Correct Factor Detector (MHz) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB) Type 1 3628.2 42.58 74.00 -31.42 30.99 11.59 PK 2 5008.6 49.11 74.00 -24.89 31.82 17.29 PK 3 6375.4 53.34 74.00 -20.66 32.61 20.73 PK 4 8269.2 54.34 74.00 -19.66 30.09 24.25 PK 5 9772 59.04 74.00 -14.96 30.01 29.03 PK *6 11184.7 62.21 74.00 -11.79 29.72 32.49 PK Note: 1. All reading above 1GHz is performed with peak measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. “ * ”, means this data is the worst emission level. 5. Emission Level = Reading Level + Correct Factor. 6. The average measurement was not performed when the peak measured data under the limit of average detection. 7. The Emission above 13GHz were not included is because their levels are too low. Page: 20 of 28

Report No：1890124R-RFUSP01V00 Site : CB4-H Engineer : Andy Tsai Model No : LE910C1-SV Test Date : 2018/10/13 Test Voltage : DC 3.8V Polarity : Vertical Test Mode : Mode 1: LTE Band 4 No Frequency Emission Level Limit Margin Reading Level Correct Factor Detector (MHz) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB) Type 1 4043 45.99 74.00 -28.01 31.96 14.03 PK 2 5386 51.06 74.00 -22.94 33.50 17.56 PK 3 6763 56.78 74.00 -17.22 34.57 22.21 PK 4 8289.6 55.83 74.00 -18.17 31.53 24.30 PK 5 9795.8 60.62 74.00 -13.38 31.52 29.10 PK *6 11125.2 63.24 74.00 -10.76 30.88 32.36 PK Note: 1. All reading above 1GHz is performed with peak measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. “ * ”, means this data is the worst emission level. 5. Emission Level = Reading Level + Correct Factor. 6. The average measurement was not performed when the peak measured data under the limit of average detection. 7. The Emission above 13GHz were not included is because their levels are too low. Page: 21 of 28

Report No：1890124R-RFUSP01V00 Site : CB4-H Engineer : Andy Tsai Model No : LE910C1-SV Test Date : 2018/10/13 Test Voltage : DC 3.8V Polarity : Horizontal Test Mode : Mode 2: LTE Band 13 No Frequency Emission Level Limit Margin Reading Level Correct Factor Detector (MHz) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB) Type 1 3932.5 44.98 74.00 -29.02 31.85 13.13 PK 2 5003.5 50.13 74.00 -23.87 32.83 17.30 PK 3 5914.7 51.95 74.00 -22.05 33.21 18.74 PK *4 6829.3 56.30 74.00 -17.70 34.05 22.25 PK 5 7849.3 55.20 74.00 -18.80 30.75 24.45 PK 6 8842.1 55.49 74.00 -18.51 29.44 26.05 PK Note: 1. All reading above 1GHz is performed with peak measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. “ * ”, means this data is the worst emission level. 5. Emission Level = Reading Level + Correct Factor. 6. The average measurement was not performed when the peak measured data under the limit of average detection. 7. The Emission above 13GHz were not included is because their levels are too low. Page: 22 of 28

Report No：1890124R-RFUSP01V00 Site : CB4-H Engineer : Andy Tsai Model No : LE910C1-SV Test Date : 2018/10/13 Test Voltage : DC 3.8V Polarity : Vertical Test Mode : Mode 2: LTE Band 13 No Frequency Emission Level Limit Margin Reading Level Correct Factor Detector (MHz) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB) Type 1 4566.6 47.94 74.00 -26.06 32.14 15.80 PK 2 5629.1 50.88 74.00 -23.12 33.13 17.75 PK 3 6618.5 54.84 74.00 -19.16 32.93 21.91 PK 4 7696.3 54.44 74.00 -19.56 29.52 24.92 PK 5 8818.3 56.35 74.00 -17.65 30.18 26.17 PK *6 10248 62.97 74.00 -11.03 32.72 30.25 PK Note: 1. All reading above 1GHz is performed with peak measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. “ * ”, means this data is the worst emission level. 5. Emission Level = Reading Level + Correct Factor. 6. The average measurement was not performed when the peak measured data under the limit of average detection. 7. The Emission above 13GHz were not included is because their levels are too low. Page: 23 of 28

Report No：1890124R-RFUSP01V00 Attachment 1  Test Setup Photograph <Radiated Emission> Test Mode： Mode 1: LTE Band 4 Mode 2: LTE Band 13 Description： Front View of Radiated Emission Test Setup (Bi-Log) Description： Back View of Radiated Emission Test Setup (Bi-Log) Page: 24 of 28

Report No：1890124R-RFUSP01V00 Test Mode： Mode 1: LTE Band 4 Mode 2: LTE Band 13 Description： Front View of Radiated Emission Test Setup (Horn) Description： Back View of Radiated Emission Test Setup (Horn) Page: 25 of 28

3> DEKRA Telit esicisy cern savpte m sumomnie weeu venseisy If oenedin ons tade ior

Report No：1890124R-RFUSP01V00 Attachment 2  EUT External Photograph (1) EUT Photo (2) EUT Photo Page: 27 of 28

Report No：1890124R-RFUSP01V00 (3) EUT Photo (Antenna) Page: 28 of 28


Document Created: 2018-11-06 13:55:46
Document Modified: 2018-11-06 13:55:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC