18C0043R-ITUSP01V00 Report-DEKRA S.A.U. (Telit)(LE910C1-ST)-Version (V1.0)

FCC ID: RI7LE910C1ST

Test Report

Download: PDF
FCCID_4214582

FCC Test Report Product Name ： LE910C1-ST Model No. ： LE910C1-ST Applicant ： Telit Wireless Solutions CO., LTD. Address ： 13th FL. Shinyoung Securities Bld., 6, Gukjegeumyung-ro8-gil, Yeongdeungpo-gu, Seoul, 150-884, Korea Date of Receipt ： 2018/12/04 Report No. ： 18C0043R-ITUSP01V00 Issued Date ： 2018/12/12 Report Version ： V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd..

Report No：18C0043R-ITUSP01V00 Tes t R e p o r t C e r t i f i c a t i o n Issued Date : 2018/12/12 Report No. : 18C0043R-ITUSP01V00 Product Name : LE910C1-ST Applicant : Telit Wireless Solutions CO., LTD. Address : 13th FL. Shinyoung Securities Bld., 6, Gukjegeumyung-ro8-gil, Yeongdeungpo-gu, Seoul, 150-884, Korea Manufacturer : Telit Wireless Solutions CO., LTD. Model No. : LE910C1-ST EUT Voltage : DC 3.8V Trade Name : Applicable Standard : FCC CFR Title 47 Part 15 Subpart B: 2017 Class B, CISPR 22: 2008, ICES-003 Issue 6: 2016 Class B, ANSI C63.4: 2014 Test Result : Complied Laboratory Name : Hsin Chu Laboratory Address : No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan, R.O.C. TEL: +886-3-582-8001 / FAX: +886-3-582-8958 Documented By : ( Lyla Yang / Engineering Adm. Specialist ) Tested By : ( Hornet Liu / Senior Engineer ) Approved By : ( Arthur Liu / Deputy Manager ) Page: 2 of 22

Report No：18C0043R-ITUSP01V00 Laboratory Information We , DEKRA Testing and Certification Co., Ltd., are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted (audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scopes: Taiwan R.O.C. : BSMI, NCC, TAF USA : FCC Japan : VCCI The related certificate for our laboratories about the test site and management system can be downloaded from DEKRA Testing and Certification Co., Ltd. Web Site : http://www.dekra.com.tw/english/about/certificates.aspx?bval=5 The address and introduction of DEKRA Testing and Certification Co., Ltd. laboratories can be founded in our Web site : http://www.dekra.com.tw/index_en.aspx If you have any comments, Please don’t hesitate to contact us. Our test sites as below: 1 No. 75-2, 3rd Lin, WangYe Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan (R.O.C.) TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : info.tw@dekra.com 2 No.372, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan TEL: +886-3-582-8001 / FAX: +886-3-582-8958 E-Mail : info.tw@dekra.com 3 No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan TEL: +886-3-582-8001 / FAX: +886-3-582-8958 E-Mail : info.tw@dekra.com Page: 3 of 22

Report No：18C0043R-ITUSP01V00 TABLE OF CONTENTS Description Page 1. General Information ................................................................................................................. 5 1.1. EUT Description ................................................................................................................... 5 1.2. Mode of Operation ............................................................................................................... 6 1.3. Tested System Details .......................................................................................................... 7 1.4. Configuration of Tested System ........................................................................................... 7 1.5. EUT Exercise Software ........................................................................................................ 7 2. Technical Test........................................................................................................................... 8 2.1. Summary of Test Result ....................................................................................................... 8 2.2. List of Test Equipment .......................................................................................................... 9 2.3. Measurement Uncertainty .................................................................................................. 10 2.4. Test Environment ............................................................................................................... 10 3. Conducted Emissions ............................................................................................................ 11 3.1. Test Specification ............................................................................................................... 11 3.2. Test Setup .......................................................................................................................... 11 3.3. Limit.................................................................................................................................... 11 3.4. Test Procedure ................................................................................................................... 12 3.5. Test Result ......................................................................................................................... 12 4. Radiated Emissions ............................................................................................................... 13 4.1. Test Specification ............................................................................................................... 13 4.2. Test Setup .......................................................................................................................... 13 4.3. Limit.................................................................................................................................... 14 4.4. Test Procedure ................................................................................................................... 15 4.5. Test Result ......................................................................................................................... 16 4.6. Test Photograph ................................................................................................................. 20 5. Attachment ............................................................................................................................. 22  EUT Photograph ................................................................................................................ 22 Page: 4 of 22

Report No：18C0043R-ITUSP01V00 1. General Information 1.1. EUT Description Product Name LE910C1-ST Trade Name Test Model No. LE910C1-ST HW Version 1.0 SW Version 25.20.372-B006 Note: 1. This EUT is a LE910C1-ST. Page: 5 of 22

Report No：18C0043R-ITUSP01V00 1.2. Mode of Operation DEKRA has verified the construction and function in typical operation. All the test modes were carried out with the EUT in normal operation, which was shown in this test report and defined as: Pre-Test Mode Mode 1: Normal Operation Final Test Mode Emission Mode 1: Normal Operation Page: 6 of 22

Report No：18C0043R-ITUSP01V00 1.3. Tested System Details The types for all equipments, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer Model No. Serial No. FCC ID Power Cord 1 Fixture N/A N/A N/A -- -- 2 Wideband Radio R&S CMW500 106071 DoC -- Communication Tester 3 Horn Antenna Schwarzbeck BBHA 9170 202 DoC -- 1.4. Configuration of Tested System Connection Diagram Signal Cable Type Signal cable Description A RF Cable Shielded, 1m 1.5. EUT Exercise Software 1 Test system is in accord with EUT user manual. (refer to 1.4 configuration of tested system) 2 Turn on the power of all equipment. 3 The EUT link with base station and it will continue receive the signal from LTE function. 4 Verify that the EUT works properly. Page: 7 of 22

Report No：18C0043R-ITUSP01V00 2. Technical Test 2.1. Summary of Test Result No deviations from the test standards Deviations from the test standards as below description: Emission Test Performed Item Normative References Deviation Test Site Performed Conducted Emissions FCC CFR Title 47 Part 15 Subpart B: 2017, No No -- CISPR 22: 2008, ANSI C63.4: 2014 Radiated Emissions FCC CFR Title 47 Part 15 Subpart B: 2017, Yes No 2 CISPR 22: 2008, ANSI C63.4: 2014 Note: Test Site information refers to Laboratory Information. Page: 8 of 22

Report No：18C0043R-ITUSP01V00 2.2. List of Test Equipment Radiated Emissions / CB1-H (Under 1GHz) Instrument Manufacturer Model No. Serial No. Cal. Date Next Cal. Date EMI Test Receiver R&S ESR7 101762 2018/11/22 2019/11/21 EMI Test Receiver R&S ESR7 101761 2018/11/19 2019/11/18 Pre-Amplifier QuieTek AP-025C CHM-0610033 2018/08/03 2019/08/02 Pre-Amplifier QuieTek AP-025C CHM-0503002 2018/07/27 2019/07/26 Bilog Antenna Schaffner CBL6112B 2891 2018/08/15 2019/08/14 Bilog Antenna Schaffner CBL6112B 2914 2018/08/15 2019/08/14 Chase Coaxial cable Suhner SF106_SF104_S600 10m-1 2018/08/15 2019/08/14 Coaxial cable Suhner SF106_SF104_S600 10m-2 2018/08/15 2019/08/14 Coaxial cable Suhner SF106_SF104 3m-1 2018/08/15 2019/08/14 Coaxial cable Suhner SF106_SF104 3m-2 2018/08/15 2019/08/14 DEKRA-EMI V1.0 Dekra Version 1.0 CB1-H N/A N/A Radiated Emissions / CB4-H (Above 1GHz) Instrument Manufacturer Model No. Serial No. Cal. Date Next Cal. Date Signal & Spectrum R&S FSV40 101049 2018/01/10 2019/01/09 Analyzer Horn Antenna Schwarzbeck BBHA 9120D 312 2018/09/26 2019/09/25 Horn Antenna Schwarzbeck BBHA 9170 202 2018/01/31 2019/01/30 Pre-Amplifier EMCI EMC11830I 980367 2018/01/31 2019/01/30 Pre-Amplifier Dekra AP-400C 201801231 2018/12/05 2019/12/04 Coaxial Cable Suhner SF104_SF104_ CB4-H 2018/08/15 2019/08/14 SF104_SF102 QuieTek EMI Dekra Version 2 CB4-H N/A N/A Page: 9 of 22

Report No：18C0043R-ITUSP01V00 2.3. Measurement Uncertainty Radiated Emissions (Under 1GHz) The measurement uncertainty is evaluated as ± 3.43 dB. Radiated Emissions (Above 1GHz) The measurement uncertainty is evaluated as ± 3.65 dB. 2.4. Test Environment Performed Item Items Required Actual Temperature (°C) 15-35 26 Radiated Emissions Humidity (%RH) 25-75 65 Barometric pressure (mbar) 860-1060 950-1000 Page: 10 of 22

Report No：18C0043R-ITUSP01V00 3. Conducted Emissions 3.1. Test Specification According to Standard : FCC Part 15 Subpart B, ANSI C63.4 3.2. Test Setup 3.3. Limit Limits Frequency QP AV (MHz) (dBuV) (dBuV) 0.15 – 0.50 66 – 56 56 – 46 0.50 – 5.0 56 46 5.0 – 30 60 50 Remarks: In the above table, the tighter limit applies at the band edges. Page: 11 of 22

Report No：18C0043R-ITUSP01V00 3.4. Test Procedure The EUT and simulators are connected to the main power through a line impedance stabilization network (L.I.S.N.). This provides a 50 ohm /50uH coupling impedance for the measuring equipment. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please refers to the block diagram of the test setup and photographs.) Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed on conducted measurement. Conducted emissions were invested over the frequency range from 0.15MHz to 30MHz using a receiver bandwidth of 9kHz. 3.5. Test Result Owing to the DC operation of EUT, this test item is not performed. Page: 12 of 22

Report No：18C0043R-ITUSP01V00 4. Radiated Emissions 4.1. Test Specification According to EMC Standard : FCC Part 15 Subpart B, ANSI C63.4 4.2. Test Setup Under 1GHz Test Setup Above 1GHz Test Setup Page: 13 of 22

Report No：18C0043R-ITUSP01V00 4.3. Limit Under 1GHz test shall not exceed the following value: Limits Frequency Distance (m) dBuV/m (MHz) 30 – 230 10 30 230 – 1000 10 37 Limits Frequency Distance (m) dBuV/m (MHz) 30 – 88 10 40 88 – 216 10 43.5 216 – 960 10 46 Above 960 10 54 Remark: 1. The tighter limit shall apply at the edge between two frequency bands. 1. Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system. 2. RF Voltage (dBuV/m) = 20 log RF Voltage (uV/m) Above 1GHz test shall not exceed the following value: FCC Part 15 Subpart B Paragraph 15.109 Limits Frequency Peak Average Distance (m) (MHz) (dBuV/m) (dBuV/m) Above 1000 3 74 54 Remark: 1. Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system. Page: 14 of 22

Report No：18C0043R-ITUSP01V00 4.4. Test Procedure The EUT and its simulators are placed on a turn table which is 0.8 meter above ground. The turn table can rotate 360 degrees to determine the position of the maximum emission level and the antenna can move up and down between 1 meter and 4 meters to find out the maximum emission level. Both horizontal and vertical polarization of the antenna are set on measurement. In order to find the maximum emission, all of the interface cables must be manipulated on radiated measurement. For an unintentional radiator, including a digital device, the spectrum shall be investigated from the lowest radio frequency signal generated or used in the device, without going below the lowest frequency for which a radiated emission limit is specified, up to the frequency shown in the folowing table: Highest frequency generated or Upper frequency of measurement used in the device or on which the range (MHz) device operates or tunes (MHz) Below 1.705 30 1.705 – 108 1000 108 – 500 2000 500 – 1000 5000 th 5 harmonic of the highest Above 1000 frequency or 40 GHz, whichever is lower On any frequency or frequencies below or equal to 1000 MHz, the radiated limits shown are based on measuring equipment employing a quasi-peak detector function and above 1000 MHz, the radiated limits shown are based measuring equipment employing an average detector function. When average radiated emission measurement are included emission measurement Above 1000 MHz, there also is a limit on the radio frequency emissions, as measured using instrumentation with a peak detector function, corresponding to 20 dB above the maximum permitted average limit. For class A, the measurement distance between the EUT and antenna is 10 meters for under 1GHz and 3 meters for above 1GHz. For class B, the measurement distance between the EUT and antenna is 10 meters for under 1GHz and 3 meters for above 1GHz. The bandwidth below 1GHz setting on the field strength meter is 120 kHz and above 1GHz is 1MHz. Page: 15 of 22

Report No：18C0043R-ITUSP01V00 4.5. Test Result Site : CB1-H Engineer : hornet Model No : LE910C1-ST Test Date : 2018/12/5 Test Voltage : DC 3.8V Polarity : Horizontal Test Mode : Mode 1: Normal Operation Note : No Frequency Emission Level Limit Margin Reading Level Correct Factor Detector (MHz) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB) Type 1 459.71 24.91 37.00 -12.09 30.98 -6.07 QP 2 499.965 27.46 37.00 -9.54 33.51 -6.05 QP 3 598.42 27.85 37.00 -9.15 29.90 -2.05 QP *4 783.933 29.64 37.00 -7.36 31.19 -1.55 QP 5 908.82 28.45 37.00 -8.55 28.96 -0.51 QP 6 983.753 29.32 37.00 -7.68 28.62 0.70 QP Remark: 1. " * ", means this data is the worst emission level. 2. Emission Level = Reading Level + Correct Factor. 3. Margin = Emission Level - Limit. Page: 16 of 22

Report No：18C0043R-ITUSP01V00 Site : CB4-H Engineer : Hornet Model No : LE910C1-ST Test Date : 2018/12/7 Test Voltage : DC 3.8V Polarity : Horizontal Test Mode : Mode 1: Normal Operation Note : No Frequency Emission Level Limit Margin Reading Level Correct Factor Detector (MHz) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB) Type 1 3031.25 40.04 74.00 -33.96 38.00 2.04 PK 2 3911.25 42.45 74.00 -31.55 37.43 5.02 PK 3 4702.5 43.66 74.00 -30.34 35.93 7.73 PK 4 5011.25 44.55 74.00 -29.45 35.41 9.14 PK 5 5316.25 44.37 74.00 -29.63 35.11 9.26 PK *6 5996.25 48.55 74.00 -25.45 35.86 12.69 PK Remark: 1. " * ", means this data is the worst emission level. 2. Emission Level = Reading Level + Correct Factor. 3. Margin = Emission Level - Limit. Page: 17 of 22

Report No：18C0043R-ITUSP01V00 Site : CB1-H Engineer : hornet Model No : LE910C1-ST Test Date : 2018/12/5 Test Voltage : DC 3.8V Polarity : Vertical Test Mode : Mode 1: Normal Operation Note : No Frequency Emission Level Limit Margin Reading Level Correct Factor Detector (MHz) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB) Type 1 299.903 25.14 37.00 -11.86 35.56 -10.42 QP 2 433.52 26.28 37.00 -10.72 32.13 -5.85 QP 3 499.965 27.94 37.00 -9.06 35.43 -7.49 QP 4 601.573 29.62 37.00 -7.38 32.38 -2.76 QP *5 846.498 29.73 37.00 -7.27 31.89 -2.16 QP 6 999.758 29.12 37.00 -7.88 29.58 -0.46 QP Remark: 1. " * ", means this data is the worst emission level. 2. Emission Level = Reading Level + Correct Factor. 3. Margin = Emission Level - Limit. Page: 18 of 22

Report No：18C0043R-ITUSP01V00 Site : CB4-H Engineer : Hornet Model No : LE910C1-ST Test Date : 2018/12/7 Test Voltage : DC 3.8V Polarity : Vertical Test Mode : Mode 1: Normal Operation Note : No Frequency Emission Level Limit Margin Reading Level Correct Factor Detector (MHz) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB) Type 1 1773.75 38.65 74.00 -35.35 41.91 -3.26 PK 2 2555 39.68 74.00 -34.32 39.44 0.24 PK 3 3186.25 40.65 74.00 -33.35 38.07 2.58 PK 4 4128.75 42.37 74.00 -31.63 36.43 5.94 PK 5 4988.75 44.24 74.00 -29.76 35.11 9.13 PK *6 5905 48.46 74.00 -25.54 36.30 12.16 PK Remark: 1. " * ", means this data is the worst emission level. 2. Emission Level = Reading Level + Correct Factor. 3. Margin = Emission Level - Limit. Page: 19 of 22

Report No：18C0043R-ITUSP01V00 4.6. Test Photograph Test Mode : Mode 1: Normal Operation Description : Front View of Radiated Emissions Test Setup Test Mode : Mode 1: Normal Operation Description : Back View of Radiated Emissions Test Setup Page: 20 of 22

Report No：18C0043R-ITUSP01V00 Test Mode : Mode 1: Normal Operation Description : Front View of Radiated Emissions Test Setup (Horn) Test Mode : Mode 1: Normal Operation Description : Back View of Radiated Emissions Test Setup (Horn) Page: 21 of 22

Report No：18C0043R-ITUSP01V00 5. Attachment  EUT Photograph (1) EUT Photo Page: 22 of 22


Document Created: 2019-03-27 17:54:02
Document Modified: 2019-03-27 17:54:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC