RF Exposure

FCC ID: RI7LE910C1NS

RF Exposure Info

Download: PDF
FCCID_3406874

DEKRA Testing and Certification S.A.U. Parque Tecnológico de Andalucía Severo Ochoa, 2 & 6 29590 Málaga Spain Date: April 26th, 2017 Report: 53299_LE910C1-NS RF exposure analysis for the equipment – Maximum Antenna Gain Model: LE910C1-NS FCC ID: RI7LE910C1NS IC: 5131A-LE910C1NS The device Telit LE910C1-NS is a module designed to be installed in other devices. This device is to be used only for fixed and mobile applications. If the final product after integration is intended for portable use, new applications and FCC and ISED are required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all the persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as under the conditions described KDB 447498 D01 General RF Exposure Guidance. MPE exposure limits The table below is excerpted from Table 1B of 47 CFR 1.1310 titled Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure: 2 Frequency Range (MHz) Power density (mW/cm ) Averaging time (minutes) 300 – 1500 f (MHz) /1500 30 1500 – 100.000 1,0 30 The table below is excerpted from RSS-102, Issue 5, 4, titled “Table 4: RF Field Strength Limits for Devices Used by the General Public”: 2 Frequency Range (MHz) Power density (W/m ) Averaging time (minutes) 0.6834 300 – 6000 0.02619·f 6 EIRP limits Frequency FCC MPE ISED MPE FCC/IC FCC EIRP (MHz) ISED EIRP limit Band limit limit MPE limit limit (Lowest 2 2 2 (W) (mW/cm ) (mW/cm ) (mW/cm ) (W) Frequency) FDD 5 820,0 0,547 0,257 0,25671 11,48 11,50 FDD 26 814,0 0,543 0,255 0,25542 11,48 11,50 FDD 4 1710,0 1,000 0,424 0,42419 1,00 1,00 FDD 2 1850,0 1,000 0,448 0,44763 2,00 2,00 FDD 25 1850,0 1,000 0,448 0,44763 2,00 2,00 FDD 12 699,0 0,466 0,230 0,23017 4,92 5,00

PG Using the equation S to calculate the exposure to electromagnetic fields 4R 2 where: S = power density (in appropriate units, e.g. mW/cm 2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna (appropriate units, e.g., cm) The maximum antenna gain that can be used in the LE910C1-NS is shown in the following table: Maximum Evaluation Maximun Maximun antenna Frequency Antenna gain to Antenna gain to Antenna gain to conducted FCC MPE ISED MPE FCC/IC MPE FCC EIRP ISED EIRP distance for antenna gain to gain to meet all the (MHz) Duty cicle meet FCC/ISED meet FCC EIRP meet ISED EIRP Band output power limit limit limit limit limit compliance with meet all the limits per frequency (Low est (%) 2 2 2 MPE limit limit limit (per tune-up) (mW/cm ) (mW/cm ) (mW/cm ) (W) (W) MPE limits limits band Frequency) (dBi) (dBi) (dBi) (dBm) (cm) (dBi) (dBi) FDD 5 820,0 25,00 100,0% 0,547 0,257 0,25671 11,48 11,50 20 6,10 15,59 15,60 6,10 6,08 FDD 26 814,0 25,00 100,0% 0,543 0,255 0,25542 11,48 11,50 20 6,08 15,59 15,60 6,08 FDD 4 1710,0 25,00 100,0% 1,000 0,424 0,42419 1,00 1,00 20 8,28 5,00 5,00 5,00 5,00 FDD 2 1850,0 25,00 100,0% 1,000 0,448 0,44763 2,00 2,00 20 8,52 8,01 8,01 8,01 8,01 FDD 25 1850,0 25,00 100,0% 1,000 0,448 0,44763 2,00 2,00 20 8,52 8,01 8,01 8,01 FDD 12 699,0 25,00 100,0% 0,466 0,230 0,23017 4,92 5,00 20 5,63 11,91 11,98 5,63 5,63 Maximum Evaluation Frequency PG (MHz) conducted Duty cicle Antenna FCC/IC MPE FCC EIRP limit ISED EIRP limit FCC/ISED distance for S  MPE Ratio Band (Low est output power (%) gain limit (W) (W) EIRP limit compliance 4 R 2 (S/MPE limit) (per tune-up) (dBi) (mW/cm2) (W) with MPE Frequency) (mW/cm2) (dBm) limits (cm) FDD 5 820,0 25,00 100,0% 6,08 0,25671 11,48 11,50 11,48 20 0,25511 0,99379 FDD 26 814,0 25,00 100,0% 6,08 0,25542 11,48 11,50 11,48 20 0,25511 0,99879 FDD 4 1710,0 25,00 100,0% 5,00 0,42419 1,00 1,00 1,00 20 0,19894 0,46899 FDD 2 1850,0 25,00 100,0% 8,01 0,44763 2,00 2,00 2,00 20 0,39786 0,88881 FDD 25 1850,0 25,00 100,0% 8,01 0,44763 2,00 2,00 2,00 20 0,39786 0,88881 FDD 12 699,0 25,00 100,0% 5,63 0,23017 4,92 5,00 4,92 20 0,23000 0,99926 Yours sincerely, P.A. ________________________________ By: Ken Bednasz Title: VP Application Engineering Company: Telit Communications S.p.A. Telephone: +1-919-439-7977 e-mail: ken.bednasz@telit.com


Document Created: 2017-05-26 08:12:43
Document Modified: 2017-05-26 08:12:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC