Declaration of Equivalance

FCC ID: RI7GM862L

Cover Letter(s)

Download: PDF
FCCID_732774

_A Cod:. 30272NT10793A ! efit TECHNICAL NOTE Pls 0272 t Rel.: 0 Communieations $p.A. Date: —24/10/2006 TELIT Communications S.p.A. reventiva autorizzazione scritta di TELIT Communications $.p.A. Att : To whom may concern Documentazione riservata. Queslo documento non pu6 essere riprodotto, anche Software and Hardware declaration for GM862—QUAD—PY variant Tufl i diritl sono tutelati a norma di legge. We, TELIT Communications S.p.A. declares that software version of the GM862—QUAD—PY module will be different in comparison with the software version of the GMS862—QUAD module. The improvements introduced with the GM862—QUAD—PY software version will not have any impact on the essential requirement of the R&TTE directive. These software parzialments, né. reso noto a terzi se differences will not affect in anyway to the RF, EMC and SAFETY functionality of the GM862—QUAD—PY module. We also declare that the hardware difference of the GMS862—QUAD—PY module in comparison with the hardware of the GM862—QUAD module will not have affect in anyway to the RF, EMC and SAFETY functionality of the GM862—QUAD—PY module. The schematic, PCB and layout of the GM862—QUAD—PY module are the same of the GMS862—QUAD and the only difference is the memory size of 8Mb instead of 4Mb (same package and same pin_out) nor its contents revealed in any mannerto others without the axpress written permission of TELIT Communications S.p.A. Restricted document. No part of this document can bereproduced or copied in any format, in part or totally, Company: TELIT Communications S$.p.A. All rights reserved. Address: Via Stazione di Prosecco 5/b 34010 Sgonico TS Italy Date: 24 October 2006 Telit Communications SpA Name : Giuseppe Surace ‘W& Title: R&D Departments Manager Signf@ture Author: Andrea Fragiacomo Title: Page 1 of 1 Filename: 30272nt10793a.doc MOD. 59 02/00 Rev. 0 CONFIDENTIAL

Cod:. 30272NT10792A ielit TECHNICAL NOTE Priso= gar> . Rel.: 0 Communieations $p.A. Date: 24/10/2006 TELIT Communications S.p.A. nfiva autorizzazione soritta di TELIT Communications $.p.A. Att : To whom may concern to documento non pu6 essere riprodolto, anche We, TELIT Communications S.p.A. declares that the devices: Tutlii diriti sonotutelati a norma di legge. — GM862—GPS And — GM862—QUAD parzialmente, nd. reso noto a te Differ only by the fact that in GPS version the GPS receiver and related circuitry are assembled on the printed circuit board, while in QUAD version are not. All components, layout and schematics of GSM/GPRS section are the same. Also the software is the same with the exception of a compilation switch that enables or disables the section of AT command and controls related to GPS receiver only nor its contents revealed in any mannerto otherswithout the express written permission of TELIT Communications S.p.A. Restricted document. No part of this document can be reproduced or copied in any format, in part or totally, Company: TELIT Communications S.p.A. Address: Via Stazione di Prosecco 5/b 34010 Sgonico TS Italy All rights reserved. Date: 24 October 2006 Telit Communications SpA Name : Giuseppe Surace /Ql/\,k/‘/\ @%u\u Title: R&D Departments Manager ‘Sign@fttire Author: Andrea Fragiacomo Title: Page 1 of 1 Filename: 30272nt10792a.doc MOD. 59 02/00 Rev. 0 CONFIDENTIAL

&# Cod:. 30272NT10755A Iel it TECHNICAL NOTE Prico= gaz> Rel: o Communications §9.A. Date: 08/06/06 GM862—GPS _HARDWARE DIFFERENCES DECLARATION o srlts dTELIT Gommunicaions Sp A Introduction We, TELIT Communications S.p.A. declare that the new quad—bands GSM 850/900/1800/1900 Documentazione rieerral. Guesto decumento non pub ossece riprodoto, nche terminal equipment type GM862—GPS hardware revision 3, is based on the already tested quad—bands GSM 850/900/1800/1900 terminal equipment type GE864—QUAD hardware revision 1 that should be considered as the ‘ based model‘. Aim of this document is also that to describe the main hardware differences between the new product GM862—GPS and its based model GE864—QUAD. List of differences between GE862—GPS HW Rev. 3 and GE864—QUAD Rev. 1 The following main differences between the new GMB8G2—GPS HW Rev.3 and the already tested GE864—QUAD HW Rev. 1 are declared as follows: § $ Schematic: i a Schematic page 1 $ Added Transistor Q101 (BC857BL3) with resistor R119 (470 ohm) in base controlled by Pin P9 &&8 of U101, collector to M15, N14, K13 pin of U101 and Emitter to VANA supply. & Added R114, R115 and R116 for RTC crystal configuration Changed U101 IC uP PMB7860 V 1.1K (was V 1.1D) mass production code Schematic page 2 Removed U202 (was AND gate not mounted) nor ts contents revealed i any manner to others wihoutthe xpross writen pormicsion o TELIT Communicatons $ A Restietd documant. No paral!his document can be reprodueed or copld i any ormat, in palor loal, Schematic page 3 Added resistor R309 = 560k ohm form pin 3 Q301 to GND digital pull—down Added resistor R310 = 47k ohm from VCXOEN (PIN 36 U301) to VINT digital pull—up Schematic page 4 Added L414= L415=2.2nH low pass filter Added C414=1pF low pass filter Alights resorved Added C413=33pF DC—block Added GSM RF antenna connector MMCX female COAX SMD $O401 (was PCB pad) Changed L409 = 27nH (was not mounted) ESD—block Changed R407 = not mounted (was 3.3k ohm) power control setting Changed U401 PMB6271 V1.1 (was PMB6271 A1) mass production code Removed C413 (was not mounted) external clock Schematic page 5 Related to GPS functionality all page 5 of the schematic is added ( see technical manual cod. 1vv0300730_MAN_OMOLOG_GM862—GPS_r0). The GPS part doesn‘t affect the functionality of the GSM part. Author: Andrea Fragiacomo Title: GM862—GPS HARDWARE DIFFERENCES DECLARATIONS Page 1 of 2 Filename: 30272nt10755a MOD. 9 02100 Rev. 0 CONFIDENTIAL

* Cod:. 30272NT10755A -I-e lit TECHNICAL NOTE :Z'fl: a°* Compmnications $9.A. Date: 08/06/06 Schematic page 6 Added SO601 SIM CARD connector 8 CT SMT Added SO602 board—to—board 50pin connector Added C601—C649 filter component for EMI/ESD purposes reverta autoizzaions serlla d TELTT Communicatons 5.oA Added R601—R635 filter component for EMI/ESD purposes Added L501—L608 filter component for EMI/ESD purposes Documentazione risevala. Questo dacumento non pud essece iprodato, nche Added Q601—0603 digital /O Tob i dhiti sone uleai a nerma cilegoe Other Changes: The PCB used on GM862—GPS HW Rev 3 is called CS1187B partiaimenta,16 reso notoa lre nor ts contentsrevealed in any manner to othors wihoutthe express uin permiasion of TELIT Communicatons $pA. Reshicled docsmant No part ol hls document can be reproduced or capled in any fomat n part rtolaly Company: TELIT Communications S.p.A. Address: Via Stazione di Prosecco 5/b 34010 Sgonico TS Italy Alights resorved Date: 08 June 2006 Name : Sandro Spanghero Title: Technical director Author: Andrea Fragiacomo Title: GMB62—GPS HARDWARE DIFFERENCES DECLARATIONS Page 2 of 2 Filename: 30272nt10755a MOD. 59 02000 Rev. 0 CONFIDENTIAL


Document Created: 2006-11-23 19:32:23
Document Modified: 2006-11-23 19:32:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC