RF Exposure Report

FCC ID: RI7GE866

RF Exposure Info

Download: PDF
FCCID_2260507

A Test Lab Techno Corp. Changan Lab：No. 140 -1, Changan Street, Bade City, Taoyuan County, Taiwan R.O.C. Tel：886-3-271-0188 / Fax：886-3-271-0190 MPE Report Test Report No. ： 1402FS11-01 Applicant ： Telit Communications S.p.A. Manufacturer ： Telit Communications S.p.A. Product Type ： Wireless module Trade Name ： Telit Model Number ： GE866-QUAD Date of Received Jan. 24, 2014 Test Period ： Feb. 25, 2014 Date of Issued Apr. 02, 2014 Test Specification ： 47 CFR § 2.1091 47 CFR §1.1310 ANSI / IEEE Std.C95.1-1992 H46-2/99-237E Location of Test Lab. ： Chang-an Lab. 1. The test operations have to be performed with cautious behavior, the test results are as attached. 2. The test results are under chamber environment of A Test Lab Techno Corp. A Test Lab Techno Corp. does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples. 3. The measurement report has to be written approval of A Test Lab Techno Corp. It may only be reproduced or published in full. This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. 4. This document may be altered or revised by A Test Lab Techno. Corp. personnel only, and shall be noted in the revision section of the document. Approved By ： Tested By ： (Bill Hu) (Sky Chou) ©2014 A Test Lab Techno Corp. Report Number: 1402FS11-01 Page 1 of 8

Contents 1. Description of Equipment under Test (EUT)............................................................... 3 2. Human Exposure Assessment .................................................................................... 4 3. RF Output Power........................................................................................................... 5 4. Max. Gain Evaluation.................................................................................................... 6 5. Test Result..................................................................................................................... 8 ©2014 A Test Lab Techno Corp. Report Number: 1402FS11-01 Page 2 of 8

1. Description of Equipment under Test (EUT) Applicant Telit Communications S.p.A. Applicant Address Viale Stazione di Prosecco 5/b, 34010, Trieste, Italy Manufacturer Telit Communications S.p.A. Manufacturer Address Viale Stazione di Prosecco 5/b, 34010, Trieste, Italy Product Type Wireless module Trade Name Telit Model Number GE866-QUAD FCC ID RI7GE866 IC 5131A-GE866 Frequency Range 824.2 - 848.8 MHz GSM/GPRS 850 1850.2 - 1909.8 MHz PCS/GPRS 1900 *GPRS Multi Class: 10 Transmit Power GSM/GPRS 850: 2.037 W / 33.09 dBm (conducted power) PCS/GPRS 1900: 0.989 W / 29.95 dBm Antenna Specification GSM/GPRS 850: 6.42 dBi GSM/GPRS 1900: 1.99 dBi Antenna Designation 1/4 λ Mobile Antenna Temperature Range -30 ~ +70°C RF Evaluation 5.48 W/m2 The above equipment was tested by A Test Lab Techno Corp. For compliance with the requirements set forth in 47 CFR § 2.1091 & 47 CFR § 1.1310. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties ©2014 A Test Lab Techno Corp. Report Number: 1402FS11-01 Page 3 of 8

2. Human Exposure Assessment Due to the design and installation of this product, it is not possible to conduct SAR evaluation. This is because client either manufactures or supplies the antenna(s) that will be used in the installation of this product. Therefore, this product will be evaluated as a mobile device per 47 CFR §1.1310 titled “Radiofrequency radiation exposure limits”, generally referred to as MPE limits. In 47 CFR § 2.1091, paragraph (b) defines a mobile device as “a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 cm is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. ” This product is intended to be installed into a vehicle such that the unit is physically secured at one location. In the installation guide supplied with the product, Client has made the following statement: “IMPORTANT: To meet the FCC’s RF Exposure Guidelines, the antenna should be installed so there is at least 20 cm of separation between the body of the user and nearby persons and the antenna”. Based on the installation of the transceiver and the antenna, the transmitters radiating structure is more than 20 cm from the user. Thus, this product is a “mobile device” as defined in section § 2.1091 paragraph (b). Exposure evaluation Equation from page 18 of OET Bulletin 65, Edition 97-01 PG S= 4πR 2 4πR 2 Gmax = Slimit Pav Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna. ©2014 A Test Lab Techno Corp. Report Number: 1402FS11-01 Page 4 of 8

3. RF Output Power Frequency Avg.-burst Conducted power Band Data Rate CH (MHz) (dBm) 128 824.2 33.09 GSM 850 --- 190 836.6 33.07 251 848.8 32.96 128 824.2 33.06 4Down1Up 190 836.6 33.01 251 848.8 32.91 GPRS 850 128 824.2 33.02 3Down2Up 190 836.6 32.97 251 848.8 32.87 Frequency Avg.-burst Conducted power Band Data Rate CH (MHz) (dBm) 512 1850.2 29.95 GSM 1900 --- 661 1880.0 29.79 810 1909.8 29.67 512 1850.2 29.88 4Down1Up 661 1909.8 29.78 810 1909.8 29.64 GPRS 1900 512 1850.2 29.85 3Down2Up 661 1909.8 29.75 810 1909.8 29.62 ©2014 A Test Lab Techno Corp. Report Number: 1402FS11-01 Page 5 of 8

4. Max. Gain Evaluation Calculations to meet ERP limits Calculations to meet MPE limits Antenna gain to Antenna gain to Distance max tune-up Data Frequency Limit Duty Peak ERP meet ERP limits meet MPE limits Band (cm) power (upper limit) Rate (MHz) (mw)/cm2 Cycle power limits [G1] [G2] [R] (dBm) (dBm) (W) Numeric [dBi] [P] Numeric [dBi] 824.2 0.549 20 0.125 34.00 7.00 4.57 6.60 34 8.78 9.43 GSM 850 1D1U 836.6 0.558 20 0.125 34.00 7.00 4.57 6.60 34 8.93 9.50 848.8 0.566 20 0.125 34.00 7.00 4.57 6.60 34 9.06 9.57 824.2 0.549 20 0.125 34.00 7.00 4.57 6.60 34 8.78 9.43 4D1U 836.6 0.558 20 0.125 34.00 7.00 4.57 6.60 34 8.93 9.50 848.8 0.566 20 0.125 34.00 7.00 4.57 6.60 34 9.06 9.57 GPRS 850 824.2 0.549 20 0.250 34.00 7.00 4.57 6.60 34 4.39 6.42 3D2U 836.6 0.558 20 0.250 34.00 7.00 4.57 6.60 34 4.46 6.49 848.8 0.566 20 0.250 34.00 7.00 4.57 6.60 34 4.53 6.56 Min G1 : 6.60 dBi Min G2 : 6.42 dBi Min G(G1,G2) : 6.42 dBi G1 : Antenna gain(dBi) to comply with ERP limits G2 : Antenna gain(dBi) to comply with MPE limits Note: In order to comply with MPE and ERP limits therefore the max antenna gain should not exceed 6.42 dBi in GSM850 MHz. ©2014 A Test Lab Techno Corp. Report Number: 1402FS11-01 Page 6 of 8

Calculations to meet EIRP limits Calculations to meet MPE limits Antenna gain to Antenna gain to Distance max tune-up Data Frequency Limit Duty Peak EIRP meet ERP limits meet MPE limits Band (cm) power (upper limit) Rate (MHz) (mw)/cm2 Cycle power limits [G1] [G2] [R] (dBm) (dBm) (w) Numeric [dBi] [P] Numeric [dBi] 1850.2 1.000 20 0.125 31.00 2.00 1.58 1.99 31 31.94 15.04 PCS 1900 1D1U 1880.0 1.000 20 0.125 31.00 2.00 1.58 1.99 31 31.94 15.04 1909.8 1.000 20 0.125 31.00 2.00 1.58 1.99 31 31.94 15.04 1850.2 1.000 20 0.125 31.00 2.00 1.58 1.99 31 31.94 15.04 4D1U 1909.8 1.000 20 0.125 31.00 2.00 1.58 1.99 31 31.94 15.04 1909.8 1.000 20 0.125 31.00 2.00 1.58 1.99 31 31.94 15.04 GPRS 1900 1850.2 1.000 20 0.250 31.00 2.00 1.58 1.99 31 15.97 12.03 3D2U 1909.8 1.000 20 0.250 31.00 2.00 1.58 1.99 31 15.97 12.03 1909.8 1.000 20 0.250 31.00 2.00 1.58 1.99 31 15.97 12.03 Min G1 : 1.99 dBi Min G2 : 12.03 dBi Min G(G1,G2) : 1.99 dBi G1 : Antenna gain(dBi) to comply with EIRP limits G2 : Antenna gain(dBi) to comply with MPE limits Note: In order to comply with MPE and EIRP limits therefore the max antenna gain should not exceed 1.99 dBi in PCS. Summary Gain Band Antenna Gain Evaluation(dBi) GSM/GPRS 850 6.42 GSM/GPRS 1900 1.99 Note: Except meet limit of EIRP and MPE, the evaluation gain also meets other test with RSE and CSE. Therefore it chose available evaluation gain on the report. Please see the summary gain that actual gain should be not more than evaluation gain. ©2014 A Test Lab Techno Corp. Report Number: 1402FS11-01 Page 7 of 8

5. Test Result Max Tune-up [P] x [G] Distance Numeric Power Density Data Frequency Limit Power ANT Gain Duty with Duty cycle Band (cm) Gain (mw/cm2) Rate (MHz) (mw/cm2) (upper limit) (dBi) Cycle (mW) [R] [G] [S] (dBm) [P] [TP] 824.2 0.549 20 34 6.42 4.39 0.125 1378.40 0.274 GSM 850 1D1U 836.6 0.558 20 34 6.42 4.39 0.125 1378.40 0.274 848.8 0.566 20 34 6.42 4.39 0.125 1378.40 0.274 824.2 0.549 20 34 6.42 4.39 0.125 1378.40 0.274 4D1U 836.6 0.558 20 34 6.42 4.39 0.125 1378.40 0.274 848.8 0.566 20 34 6.42 4.39 0.125 1378.40 0.274 GPRS 850 824.2 0.549 20 34 6.42 4.39 0.250 2756.80 0.548 3D2U 836.6 0.558 20 34 6.42 4.39 0.250 2756.80 0.548 848.8 0.566 20 34 6.42 4.39 0.250 2756.80 0.548 1850.2 1.000 20 31 1.99 1.58 0.125 248.64 0.049 GSM 1900 1D1U 1880.0 1.000 20 31 1.99 1.58 0.125 248.64 0.049 1909.8 1.000 20 31 1.99 1.58 0.125 248.64 0.049 1850.2 1.000 20 31 1.99 1.58 0.125 248.64 0.049 4D1U 1880.0 1.000 20 31 1.99 1.58 0.125 248.64 0.049 1909.8 1.000 20 31 1.99 1.58 0.125 248.64 0.049 GPRS 1900 1850.2 1.000 20 31 1.99 1.58 0.250 497.28 0.099 3D2U 1880.0 1.000 20 31 1.99 1.58 0.250 497.28 0.099 1909.8 1.000 20 31 1.99 1.58 0.250 497.28 0.099 Note: The Numeric Gain calculated by 10^(ant. Gain(dBi) /10). ©2014 A Test Lab Techno Corp. Report Number: 1402FS11-01 Page 8 of 8


Document Created: 2019-10-06 03:58:57
Document Modified: 2019-10-06 03:58:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC