Declaration of Equivalance

FCC ID: RI7GE863L

Cover Letter(s)

Download: PDF
FCCID_681843

Telit f © Communications $.p.A. TELIT Communications S.p.A. Att : To whom may concern Software and Hardware declaration for GE863—PY variant We, TELIT Communications S.p.A. declares that software version of the GE863—PY module will be different in comparison with the software version of the GE863—QUAD module. The improvements introduced with the GE863—PY software version will not have any impact on the essential requirement of the R&TTE directive. These software differences will not affect in anyway to the RF, EMC and SAFETY functionality of the GE863—PY module. We also declare that the hardware difference of the GE863—PY module in comparison with the hardware of the GE863—QUAD module will not have affect in anyway to the RF, EMC and SAFETY functionality of the GE863—PY module. The schematic, PCB and layout of the GE863—PY module are the same of the GE863—QUAD and the only difference is the memory size of 8Mb instead of 4Mb ( same package and same pin_out) Company: TELIT Communications S.p.A. Address: Via Stazione di Prosecco 5/b 34010 Sgonico TS Italy Date: 04 July 2005 o. elit Cémmunications SpA Name : Sandro Spanghero y\ Title: Technical director f Sig?fiture \ \— \ i Telit Communications S.p.A. — Via Stazione di Prosecco 5/b, Sgonico (TS) 34010 — Tel: 040—4192111 Fax: 040—4192333 Internet: www .telit.com

felit Communications S.p.A. DECLARATION We, Telit Communication S.p.A. declare that the devices: — GE863—GPS And — GE863—Quad Differ only by the fact that in GPS version the GPS receiver and related circuitry are assembled on the printed circuit board, while in Quad version are not. All components, layout and schematics of GSM/GPRS section are the same. Also the software is the same with the exception of a compilation switch that enables or disables the section of AT command and controls related to GPS receiver only. These changes do not effect on GSM/GPRS performances. { \\ \ Name: Sandro Spangheto _ Title: Telit Communicati Director Date: 02 March 2006 Telit Communications S.p.A. 5/b, Via Stazione di Prosecco, Sgonico (TS) 34010, Italy — Ph: +39(040)4192111 Fax: +39(040)4 1922333 Website: www.telit.com

/** . Cod:. 30278NT10744A 1él it TECHNICAL NOTE Pds— cere Communications $p.A. Date: 03/03/06 GE863—GPS HARDWARE DIFFERENCES DECLARATIONS parziaimente, né reso noto a terzi senza preventiva autorizzazione scritta di TELIT Communications $.p.A. Introduction We, TELIT Communications S.p.A. declares that the new quad—bands GSM 850/900/1800/1900 Documentazione riservala. Questo documento non pud essere riprodotio, anche terminal equipment type GE863—GPS hardware revision 2, is based on the already tested quad— bands GSM 900/1800/1900 terminal equipment type GE864—QAUD hardware revision 1 that should be considered as the ‘ based model‘. Tutti i diritti sono tutelati a norma di legge. Aim of this document is also that to describe the main hardware differences between the new product GE863—GPS and its based model GE864—QUAD. List of differences between GE863—GPS HW Rev. 2 and GE864—QUAD Rev. 1 The following main differences between the new GE863—GPS HW Rev.2 and the already tested GE864—QUAD HW Rev. 1 are declared as follows: Added components: Added resistor R309 = 560k ohm 0402 5% form pin 3 Q301 to GND Added resistor R310 = 47k ohm 0402 5% from VCXOEN (PIN 36 U301) to VINT Added C414 = 33pF. Related to GPS functionality all page 5 of the schematic is added (this part doesn‘t affect the functionality of the GSM part) Other Changes: U101 = uP PMB7860 V 1.1D Has to be U101 IC uP PMB7860 V 1.1K nor its contents revealed in any manner to others without the express written permission of TELIT Communications S.p.A. Resistor R407 WAS 3.3k ohm Has to be 3.3k ohm NO MOUNT Restricted document. No part of this document can be reproduced or copied in any format, in part or totally, U401 was version A1 ; Has to be Ver 1.1 L409 =27 nH was NOT mounted, Has to be MOUNTED. C413 = 100pF was NOT mounted, Has to be MOUNTED. L416 was connected between pin 10 U4O2 and VBATT, Has to be connected between pin 10 U402 and pin 9 U4O2 The PCB used on GE863—GPS HW Rev 2 is called CS1186A All rights reserved. Company: TELIT Communications S.p.A. Address: Via Stazione di Prosecco 5/b 34010 Sgonico TS Italy Date: 03 March 2006 g \ Telit Communications SpA Name : Sandro Spanghero Title: Technical director Sip\%uke _y Ext Author: Andrea Fragiacomo Title:aEses—ars HaRpwaARE DiFFERENCES DECLARATIONS Page 1 of 1 Filename: 30278NT10744A MOD. 59 02/00 Rev. 0 CONFIDENTIAL


Document Created: 2006-07-12 20:16:22
Document Modified: 2006-07-12 20:16:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC